http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
권재도,문윤배,김상태,Kwon, Jae-Do,Moon, Yun-Bae,Kim, Sang-Tae 대한기계학회 1998 大韓機械學會論文集A Vol.22 No.1
In order to develop the evaluation methods of degradation for the Ni-Cr-Mo-V steel, which is in use for turbine rotor in nuclear power plant, the degraded materials were prepared by simulated degradation methods. The result of impact test and fatigue crack growth test shows that the FATT(Fracture Appearance Transition Temperature) and fatigue crack growth rate increased with the increase of degradation. And the result of new electrochemical polarization test method was suggested for the evaluating FATT, fatigue crack growth exponent and coefficient C values based on the results of relationship between corrosion current density(Icorr) & FATT, and the m & C and Icorr.
Ni-Cr-Mo-V강의 템퍼링에 의한 미세구조 변화와 하한계 피로균열진전 특성
신훈,문윤배,김상태,권재도 ( Hoon Shin,Yun Bae Moon,Sang Tae Kim,Jae Do Kwon ) 한국열처리공학회 1997 熱處理工學會誌 Vol.10 No.4
Near-threshold fatigue crack growth characteristics was investigated on the Ni-Cr-Mo-V low alloy steel, which has the different microstructure obtained by tempering at various temperature. The specimens were austenized at 950℃ and then followed by tempering at 200℃, 530℃ and 600℃. Strain rate was obtained from strain gauge attached on the crack tip and crack opening point was observed through load-strain curve. Threshold stress intensity range(ΔK_(th)) was increased with increasing tempering tempuerature, but the effective threshold stress intensity rage(ΔK_(eff.th)) was not affected with the increasing temperature. Grain size increased with increasing tempering temperature.
Ni-Cr-Mo-V강의 전기화학적 방법에 의한 내식성 평가
권재도,문윤배,Kwon, Jae-Do,Moon, Yun-Bae 대한기계학회 1997 大韓機械學會論文集A Vol.21 No.9
When the structures are exposed to their own an application for a long period, a number of variables such as strength properties and corrosion resistance, so on are expected to change. In the present investigation the corrosion behavior and resistance for the original and degraded materials of Ni-Cr-Mo-V steel were evaluated under the conditions of pH 3, 6, 9 and 12 in a distilled water environment. The electrochemical polarization technique was employed in this investigation. Based upon the experimental results obtained, the following conclusions were drawn. A severe and uniform corrosion was observed for both original and degraded materials under the condition of pH 3. At pH 6 and pH 9, these materials showed the degradation by a pitting corrosion. The materials under pH 12 environment were degraded by a uniform corrosion. The corrosion rate per year were the highest in the pH 3 environment, followed by pH 12, pH 6 and pH 9 environment in order. The corrosion resistance was decreased from the original material, slow cooled material (10.deg. C/hr) and step cooled material in order.
SiC 입자 보강 AI 복합재료의 통계학적 피로균열진전거동에 관한 연구
권재도(Jae-Do Kwon),문윤배(Yun-bae Moon),안정주(Jung-Ju Ahn) 한국자동차공학회 1995 한국자동차공학회 춘 추계 학술대회 논문집 Vol.1995 No.11_1
The silicon carbide particles reinforced aluminium 6061(SiCp/ AI composites are generally known have wild range of applications from automobiles to airospaces. But. by the results of existing study for SiCp/AI composites. there are reports that the fatigue life of SiCp/AI composites has improved than Al matrixes and res not improved then AI matrixes.<br/> Consequently. in order to perform the reliable life prediction for SiCp/Al. the properties of probability distribution of fatigue crack initiation life & fracture life. crack growth length in regular number of cycle, crack growth rate in regular stress intensity factor range and m & C value in Paris's fatigue crack growth law and the estimation of statistical parameters have been evaluated by the statistics method
문윤배,유재용 대구미래대학 2001 論文集 Vol.19 No.1
The improvements of the thin plate joint method are required because of the application of thin plate structures are diversified. The purpose of the investigation is to evaluate the applicability of the structural adhesive on the thin plate structures. This study is performed to evaluate how the jointing effects with oil are improved, compare with that of spot welding specimens after the tensile shear test under the various conditions of the specimen, which had the single lap joints by bonding and weldbonding for the structural jointing techniques.
등방성-등방성 이종재료에 대한 균열 선단에서의 코스틱스 상에 관한 해석
유재용,문윤배 대구미래대학 2001 論文集 Vol.19 No.1
For the stress analysis in bi-materials, there have been used many theoretical and experimental methods. The experimental methods such as Morie, Photoelasticity, holography and caustics are primarily used by many researchers. In this paper, as the first step to develop the experimental method of caustics in bi-materials, the initial and caustic curve equations are established by introducing the existing stress component equations to the equation of the formation of Caustics and made the program for the generation of caustics in computer.