일본 문화 수입과 기독교적 진단

권재도 기독교한국문제연구회 1994 교회와 한국문제 Vol.25 No.-

열화평가에 전기화학적 방법의 응용에 관한 연구

권재도,문윤배,김상태,Kwon, Jae-Do,Moon, Yun-Bae,Kim, Sang-Tae 대한기계학회 1998 大韓機械學會論文集A Vol.22 No.1

In order to develop the evaluation methods of degradation for the Ni-Cr-Mo-V steel, which is in use for turbine rotor in nuclear power plant, the degraded materials were prepared by simulated degradation methods. The result of impact test and fatigue crack growth test shows that the FATT(Fracture Appearance Transition Temperature) and fatigue crack growth rate increased with the increase of degradation. And the result of new electrochemical polarization test method was suggested for the evaluating FATT, fatigue crack growth exponent and coefficient C values based on the results of relationship between corrosion current density(Icorr) & FATT, and the m & C and Icorr.

재질 열화와 프레팅 피로거동 평가에 관한 연구

권재도,성상석,최성종,Gwon, Jae-Do,Seong, Sang-Seok,Choe, Seong-Jong 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.8

Fretting is a potential degradation mechanism of structural components and equipments exposed to various environments and loading conditions. The fretting degradation, for example, for example, can be observed in equipments of nuclear, fossil as well as petroleum chemical plants exposed to special environments and loading conditions. It is well known that a cast stainless steel(CF8M) used in a primary reactor coolant(RCS) degrades seriously when that material is exposed to temperature range from 290$\^{C}$∼390$\^{C}$ for long period. This degradation can be resulted into a catastrophical failure of components. In the present paper, the characteristics of the fretting fatigue are investigated using the artificially aged CF8M specimen. The specimen of CF8M are prepared by an artificially accelerated aging technique holding 180hr at 430$\^{C}$ respectively. Through the investigations, the simple fatigue endurance limit of the virgin specimen is not altered from that obtained from the fatigue tests imposed the fretting fatigue. The similar tests are performed using the degraded specimen. The results are not changed from those of the virgin specimen. The significant effects of fretting fatigue imposed on both virgin and degraded specimen on the fatigue strength are not found.

주조 스테인리스강 CF8M의 43$0^{\circ}C$ 열화거동에 관한 연구 (II) -저사이클 피로특성 평가-

권재도,우승완,박중철,이용선,박윤원,Gwon, Jae-Do,U, Seung-Wan,Park, Jung-Cheol,Lee, Yong-Seon,Park, Yun-Won 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.9

A thermal aging is observed in a primary reactor cooling system(RCS) made of a casting stainless steel when the RCS is exposed for long period at the reactor operating temperature, 290~3300C An investigation of effects of thermal aging on a low cycle fatigue characteristics included a stress variations caused by a reactor operation and trip, is required. The purpose of the present investigation is to find an effect of a thermal aging of the CF8M on a low cycle fatigue life. The specimen of CF8M are prepared by an artificially accelerated aging technique holding 300 and 1800hr at 4300C respectively. The low cycle fatigue tests for the virgin and two aged specimens are performed at the room temperature for various strain amplitudes($\varepsilon$ta), 0.3, 0.5, 0.8, 1.0, 1.2 and 1.5% strain. Through the experiment, it is found that the fatigue life is rapidly reduced with an creasing of the aging time. The experimental fatigue life estimation formulas between the virgin and two aged specimen are obtained and are proposed to a analysis purpose.

순수 비틀림 하중하에서 열화를 고려한 2상 스데인리스강의 저주기 피로특성

권재도,박중철,Gwon, Jae-Do,Park, Jung-Cheol 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.9

Monotonic torsional and pure torsional low cycle fatigue(LCF) test with artificial degradation were performed on duplex stainless steel(CF8M). CF8M is used in pipes and valves in nuclear reactor coolant system. It was aged at 430$^{\circ}C$ for 3600hrs. Through the monotonic and LCF test, it is found that mechanical properties(i.e., yield strength, strain hardening exponent, strength coefficient etc.) increase and fatigue life(N$\sub$f/) decreases with degradation of material. The relationship between shear strain amplitude(${\gamma}$$\sub$a/)and N$\sub$f/ was proposed.

압력용기강의 경년열화 평가와 그 대책

권재도 대한기계학회 1992 大韓機械學會誌 Vol.32 No.4

이 글에서는 재료의 경년열화의 종류, 판정 방법 등에 관한 일반사항을 기술하고 고온 . 고압용 기의 경년열화현상의 대표적인 예인 T.E의 기구와 T.E감수성에 미치는 화학성분의 영향에 대해 설명하였다. 아울러 필자가 그 동안 연구해온 T.E에 의한 재료강도저하를 설명하고 수명예측을 행할 수 있는 방법을 설명하였다. 끝으로 열화의 비파괴 판정만으로 수명예측이 어려우므로 시 간에 따른 열화 정도를 파악 할 수 있는 재료강도의 주곡선을 만들어야 할 것이다. 이와 같은 실험을 하기 위해 열화재의 가속제작방법과 열화치료대책 등에 대해 설명하였다. 앞으로 국내 에서는 열화에 대한 재료강도의 주곡선이 많이 얻어져서 기계 구조물의 수명예측이 정확하게 이루어질 날이 올 것을 기대한다.

신뢰성 공학적 피로 균열의 발생, 진전 수명 평가 및 예측에 관한 연구 (II)

권재도,곽상국,최선호,황재석,진영준 대한기계학회 1991 대한기계학회논문집 Vol.15 No.3

본 연구에서는 피로 크랙 발생 및 파단수명의 통계학적 분포특성을 명확히 하 기 위해서 단축인장을 받고, 크랙 선단 곡율반경이 일정한 중앙 크랙을 가진 81개의 시험편을 사용하여 4개의 응력 레벨하에서 피로 시험을 행한후 많은 데이터들로 부터 피로크랙의 발생, 파단특성에 대한 신뢰성 있는 통계학적 확률특성을 제시하고, 이들 데이터를 활용하여 수명예측을 행해보고저 한다.

재질열화가 표면 균열 진전에 미치는 영향과 수명 예측에 관한 연구

권재도 대한기계학회 1989 대한기계학회논문집 Vol.13 No.5

본 연구에서는 피로 균열의 진전 특성 및 표면 균열과 같은 3차원 균열의 진전 특성에 나타나는 재질 열화의 영향, 열화와 피로 파괴 형태의 관계, 균열진전 속도의 분산(scattering)과 열화의 관계등에 주목해서 열화재와 회복재의 2종류의 재료를 사용해, 피로 시험에 의한 균열진전의 실험적 특성을 고찰하였다. 또한, 저자들의 종래 관통 균열 진전 특성에 대한 연구 결과를 응용해서 열화와 균열진전의 확률특성을 고려한 표면균열 진전에 대한 시뮬레이션(simulation)을 행해서 피로 수명 예측에 미치는 열화의 영향에 대해 검토해 보았다. One of the most important problems in recent life prediction is to introduce the degradation effects into life prediction procedure. In the present paper, the effect of the material degradation on the fatigue surface crack growth and fatigue life prediction in a 2 1/4 Cr-1Mo steel were investigated. The 2 1/4 Cr-1Mo steel has been used in a plant having operated for over 60000hours and subjected to material degradation due to temper-embitterment. A Monte-Carlo simulation was made on the basis of the data obtained in the experiment in order to determine the P-S-N diagrams of surface crack growth for the degraded and recovered steels.

장기 사용 보일러 헤더의 열화거동 평가에 관한 연구

권재도,배용탁,최성종,Gwon, Jae-Do,Bae, Yong-Tak,Choe, Seong-Jong 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.7

The degradation of a boiler header constructed by a material, 1Cr-0.5Mo steel in a fossil power plant is observed when the header is exposed for a long period to the high temperature and pressure. The present investigations are for evaluating the effect of the degradation on the material, such as its strength changes. Reheat-treated metal is used to compare the mechanical properties of the degraded and that of reheat-treated materials. Through the investigation, following results are obtained 1) the area ratio of ferrite in the reheat-treated material is larger than that of the degraded material, 2) the hardness and tensile strength of the degraded material are lower than that of the reheat-treated material, 3) the ductile-brittle transition temperature(DBTT) increased toward high temperature region, 4) the fatigue crack growth rate(FCGR) of the degraded material is higher than that of the reheat-treated material in the region of low ΔK value while FCGR of the both materials are similar in high ΔK region.

체적비가 $SiC_{p}$/AL 복합재료의 기계적 및 피로균열진전 특성에 미치는 영향

권재도,안정주,문윤배,Gwon, Jae-Do,An, Jeong-Ju,Mun, Yun-Bae 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.4

In order to save the energy and protect the environment, it were studied about ecomaterials with the developed countries as central figure. In the Metal Matrix Composites(MMCs), this trends appeared the development of the MMCs which had excellent mechanical properties in spite of the low volume fraction of reinforcement. Therefore, in this study, fatigue crack growth test, tensile and hardness test were conducted in order to investigate the mechanical and fatigue properties of 5 %, and 10 % $SiC_{p}$/Al composites. As the results, in the tensile and hardness test, tensile strength and hardness increased but fatigue crack growth rate decreased with $SiC_{p}$/Al volume fraction. And in the view of fatigue failured surface through the SEM, fatigue crack initiated around the SiC particle and in low $\Delta{K}$ regions, fatigue creck detoured the SiC particle but crack propagated through the SiC particle in the high $\DeltaK$ regions.