http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
나노 및 마이크로 알루미늄 혼합물의 점화 및 연소특성 고찰
이상협(Sanghyup Lee),노관영(Kwanyoung Noh),윤웅섭(Woongsup Yoon) 한국추진공학회 2013 한국추진공학회 학술대회논문집 Vol.2013 No.5
본 연구에서는 높은 용융점(?2400 K)의 산화피막 점화 방해 메커니즘 존재로 인해 점화가 용이하지 않은 마이크로 크기의 알루미늄 군입자 혼합물의 반응성 향상을 위한 기초 연구로서 스트랜드 버너를 사용하여 나노 크기의 알루미늄 첨가 및 압력 조건에 따른 점화성 향상 정도를 정량적으로 확인하고자 하였다. 분석 결과 초기 압력과 나노 크기 알루미늄의 함량이 증가함에 따라 선형 연소속도가 증가하고 혼합물의 점화온도가 낮아짐을 확인하였으며 연소 반응시 발생하는 화학종을 가시화하였다. In this study, In order to improve micro-sized aluminum mixture ignition characteristic which has ignition disturbance mechanism that is caused by high melting point(?2400 K) oxide film, strand burner was used for basic experiment which is nano-sized aluminum addition and various pressure condition. We would like to confirm quantitative result of ignition enhancement. As a result, linear burning rate was increased and Ignition temperature was decreased according to nano-sized aluminum addition rate and pressure. Furthermore emission radical was measured during combustion stage.
산화막 니켈코팅 처리 된 알루미늄 분말의 입자 크기 및 산화제 조건에 따른 점화특성 분석 연구
이상협(Sanghyup Lee),노관영(Kwanyoung Noh),윤웅섭(Woongsup Yoon) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.5
니켈 코팅된 알루미늄을 이용하여 공기 및 이산화탄소 산화제 분위기에서 점화특성 분석을 수행하였다. 니켈 코팅은 무전해 방법을 사용하였으며 최대 약 35 wt% 까지 코팅을 수행하였다. 니켈과 알루미늄의 금속간 반응이 다양한 산화제 분위기에서 어떠한 효과를 미치는지 확인하기 TGA/DSC 실험을 수행하였으며, 생성물 분석을 수행하여 점화 거동을 비교·분석하였다. 분석 결과 15-25 ㎛ 크기의 알루미늄은 75-90 ㎛ 2.38 mm 크기와 다르게 약 900 K에서 강한 발열을 수반하는 금속간 반응을 확인하였으며 이를 통해 니켈 코팅 된 알루미늄의 점화 촉진 거동을 설명할 수 있었다. In this study, in order to improve the ignitability of high energy aluminum powder, natural oxide films were chemically removed and nickel coatings were conducted. It used electroless method for nickel plating and confirmed qualitative and quantitative a time-dependent degree of nickel coating hrough analysis of surface by SEM / EDS. We also conducted element analysis by XRD and thermal properties by TGA / DSC in carbon dioxide, argon and air oxidizer. Exothermic reactions near 900 K due to the intermetallic reaction are demonstrated according to particle size. The heat of the reaction promotes the ignition characteristic of aluminum in small size. And it can explain ignition enhancement mechanism of nickel-coated aluminum powder in air and carbon dioxide.
메탄/공기 예혼합 화염의 Hydroxyl Radical을 이용한 Pyrometer 온도 보정방법에 대한 연구
이상협(Sanghyup Lee),임지환(Jihwan Lim),노관영(Kwanyoung Noh),이도형(Dohyung Lee),윤웅섭(Woongsup Yoon) 한국추진공학회 2013 한국추진공학회 학술대회논문집 Vol.2013 No.12
본 연구에서는 상용 Pyrometer를 화염온도 측정에 적용할 수 있도록 메탄/공기 예혼합 화염을 이용하여 온도 보정기법을 개발하였다. 메탄/공기 예혼합 화염의 온도는 기 개발한 OH radical을 이용한 방출 스펙트럼 비교법을 사용하여 정밀하게 측정하였고 Pyrometer 측정결과와 비교하여 보정계수를 도출하였다. 이를 이용하여 온도를 알고 있는 메탄/공기 예혼합 평면 화염 버너를 이용하여 온도 측정결과를 검증하였고 잘 일치함을 확인하였다. In this study, in order to apply the commercial pyrometer to measurement of the flame temperature, methane / air premixed flame temperature calibration method was developed. Methane / air premixed flame temperature was precisely measured by using comparison technique of OH radical emission spectra. It was compared with pyrometer measurement result and then we calculated correction factor. With this method, the temperature measurement result was verified by methane / air premixed flat-flame burner whose temperature was already known. We confirmed that both were in good agreement.
공기 산화제 분위기에서 니켈 코팅 알루미늄의 입자 크기에 따른 점화특성 분석 연구
이상협(Sanghyup Lee),임지환(Jihwan Lim),노관영(Kwanyoung Noh),윤웅섭(Woongsup Yoon) 한국추진공학회 2014 한국추진공학회 학술대회논문집 Vol.2014 No.12
니켈 코팅된 알루미늄을 이용하여 알루미늄 입자 크기에 따른 점화특성 분석을 수행하였다. 니켈 코팅은 무전해 방법을 사용하였으며 최대 약 35 wt% 까지 코팅을 수행하였다. 니켈과 알루미늄의 금속간 반응이 입자 크기에 대해서 어떠한 효과를 미치는지 확인하기 위해 18 ㎛, 2.38 ㎜, ㎛급 분말혼합물 3가지에 대해 공기 환경 내에서의 TGA / DSC 실험을 수행하여 각각의 점화 메커니즘을 비교ㆍ분석하였다. 실험결과 18 μm급 분말과 다르게 약 900 K 에서의 금속간 반응이 2.38 mm 알루미늄과 알루미늄 니켈 분말혼합물에서 발생하지 않음을 확인하였으며 이를 통해 공기 산화제 분위기에서의 니켈 코팅 된 알루미늄의 크기에 따른 점화촉진 메커니즘을 설명하였다. Using nickel-coated aluminum, we analyzed for ignition characteristics according to the size distribution of aluminum particles. We used electroless method for nickel plating and conducted a coating up to 35 wt%. In order to find out effect of intermetallic reaction with nickel and aluminum according to the size of aluminum particles, we conduct TGA/DSC experiments in air oxidizer with 18 ㎛, 2.38 ㎜, and powder mixture. And we compared and analyzed each of the ignition mechanism. Unlike 18 ㎛ aluminum, the intermetallic reaction at 900 K is not occurred with 2.38 mm and powder mixture. Consequently, we can explain ignition mechanism of nickel-coated aluminum according to the size of particles in air.
비전해 방법을 이용한 니켈 코팅 알루미늄 분말 제조 및 열물성 평가
이상협(Sanghyup Lee),임지환(Jihwan Lim),노관영(Kwanyoung Noh),윤웅섭(Woongsup Yoon) 한국추진공학회 2014 한국추진공학회 학술대회논문집 Vol.2014 No.5
본 연구에서는 고에너지 알루미늄 분말의 점화성 향상을 위해 자연상태 알루미나 산화막을 화학적으로 제거하고 니켈 코팅을 수행하였다. 니켈 코팅은 무전해 방법을 사용하였으며 SEM / EDS에 의한 표면 분석을 통해 시간에 따른 니켈 코팅 정도를 정성·정량적으로 확인하였다. 또한 XRD에 의한 화학종 분석과 TGA / DSC를 이용한 공기 환경 내에서의 열물성 분석을 수행하였고 이를 통해 공기 산화제 분위기에서의 니켈 코팅 된 알루미늄 분말의 점화촉진 메커니즘을 설명하였다. In this study, in order to improve the ignitability of high energy aluminum powder, natural oxide films(=alumina) were chemically removed and nickel coatings were conducted. It used electroless method for nickel plating and confirmed qualitative and quantitative a time-dependent degree of nickel coating through analysis of surface by SEM / EDS. We also conducted element analysis by XRD and thermal properties by TGA / DSC in air oxidizer environment. And it can explain ignition enhancement mechanism of nickel-coated aluminum powder in air.