http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
비뉴톤 유체의 연속조작 기포탑에서 기-액상의 유속, 액체점도가 기체체류량, 축방향분산 및 물질전달에 미치는 영향
조수행,강용,민병태,나종복 忠南大學校 産業技術硏究所 1990 산업기술연구논문집 Vol.5 No.2
기체체류량, 연속액상의 축방향분산계수 및 기-액 부피물질전달계수를 내경 0.15m 높이 2m인 기포탑내의 Carboxymethyl-Cellulose (CMC) 용액에서 측정하였다. 연속조작 기포탑에서 기체체류량, 축방향분산계수 및 기-액 부피물질전달계수는 기체유속의 증가에 따라 증가하였으며, 액체점도가 증가함에 따라 감소하였다. 또한 이들 값은 액체유속의 증가에 따라 약간 증가하는 경향을 나타내었다. 기체체류량, 액상축방향분산계수 및 부피물질전달계수를 실험변수에 의하여 각각 Correlation하였다. Gas phase hold-up, axial dispersion coefficient of liquid phase and gas-liquid mass transfer coefficient have been measured with CMC solution in an acrylic resin column of 0.15m-IDx2m. The gas holdup, axial dispersion coefficient and volumetric mass transfer coefficient in a continuous bubble column increased with increasing gas flow rate, decreased with increasing liquid viscosity, and also increased slightly with increasing liquid flow rate. The gas holdup, axial dispersion coefficient of liquid phase and volumetric mass transfer coefficient have been correlated in terms of experimental variables, respectively.
콘크리트용 고성능 감수재 제조공정에서 미반응 나프탈렌의 회수공정 설계
나종복,서호준 여수대학교 1994 論文集 Vol.8 No.-
It could be found that recovery of unreacted naphthalene enabled us to reduce condensation time from 30 hrs to 15 hrs with increasing quality of product. The results of preliminary design for recovery process of unreacted naphthalene are the following: The reacto(I.D.:2m, Height:3.2m, Volume:10㎥)has the standard turbine agitator(D:0.8m, Interval of impellers:1.6m),and is blown with superheated steam(165℃, latm)at the flow rate of ??. The mortor of 18㎾ is needed when no steam is blown. The wet scrubber is rotary type with coolant capacity of 2930㎏ and volume of 5.73㎥. The filter press has the filter area of 9.31㎡. The air compressor of 215㎥/min at 1atm and 20℃ is needed.
나종복,최상원 麗水水産大學校産業技術硏究所 1992 産業基術硏究所 論文集 Vol.1 No.-
Shirato 등이 제안한 폐색 여과 법칙에 부가하여, 간단한 모델을 적용하여 중간 폐색 여과 법칙을 제안하였고, 유도한 모델식을 이용하여 컴퓨터 수치모사를 수행하였다. 수치 모사 data는 문헌에 보고된 실험 data의 경향과 잘 일치하였으며, 수치 모사 data를 이용하여 모델식의 매개변수를 비선형 최소자승법으로 결정하였다. 가능성있는 여러 여과 mechanism 중에서 data를 가장 잘 묘사하는 여과 mechanism을 가설검정(hypothesis test) 방법 중의 하나인 Wilks test에 의하여 판별하였다.