http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김웅찬(Woong Chan. Kim),곽대순(Dai Soon. Kwak),김석환(Seok Hwan. Kim),오택열(Taek Yul. Oh) 한국정밀공학회 2004 한국정밀공학회 학술발표대회 논문집 Vol.2004 No.10월
In this paper, we studied low cycle fatigue behavior of laser welded sheet metal that used automobile body panel. Specimens were manufactured as weld condition and sheet metal using automobile manufacturing company at present. For to know mechanical properties, micro Vicker"s hardness test was performed of specimens. But, we can"t confirm mechanical properties of weld bead and heat affected zone because laser weld makes very narrow weld bead and heat affected zone than other welding method. Therefore, we performed low cycle fatigue test with similar weldment, dissimilar weldment, similar thickness and dissimilar weldment, and dissimilar thickness and dissimilar weldment for fatigue properties of thickness and welding direction. As well, we analysis stress distribution of base metal, weld bead, and heat affected zone according to strain load using finite element method.
김석환(Seog Hwan Kim),곽대순(Dai-Soon Kwak),김웅찬(Woong-Chan Kim),오택열(Taek Yul Oh) 한국정밀공학회 2005 한국정밀공학회 학술발표대회 논문집 Vol.2005 No.10월
In this study, low fatigue behavior of laser welded sheet metal were investigated. Before welding, the cross section of butt joint was prepared only by fine shearing without milling process. Specimens were same sheet metal and welding condition that using automobile manufacturing company at present. Butt joint of cold rolled sheet metal was welded by CO₂ laser. It is used that welding condition such as laser welding speed was 5.5m/sec and laser output power was 5kW for 0.8㎜ and 1.2㎜ sheet metal. The laser weldments were machined same or different thickness and same or different material. In order to mechanical properties of around welding zone, hardness test was performed. Hardness of welding bead is about 2 times greater than base material. We performed the low cycle fatigue tests for obtaining fatigue properties about thickness and the weld line direction of specimen. The results of strain controlled low cycle fatigue test indicate that all specimens occur cyclic softening, as indicated by the decrease in stress to reach a prescribed strain.
김상채 ( Sang-chae Kim ),송주현 ( Ju Hyun Song ),김웅찬 ( Woong Chan Kim ),여종빈 ( Jong-bin Yeo ) 한국폐기물자원순환학회 2023 한국폐기물자원순환학회지 Vol.40 No.4
In this paper, we investigated the properties of volume reduction ingot for the recycling of flame-resistant expanded polystyrene (EPS) waste. The experimental method consisted of a composite process involving EPS reduction, grinding, crushing, and degreasing. Through our study we determined that the optimum process for achieving the desired results involved a combination of multi-grinding and degreasing methods. Furthermore, we identified the optimal heat condition for the degreasing process to maintain flame retardant properties as 600℃ for a duration of 2 h. In addition, we provide evidence to support the feasibility of using this process in EPS recycling for flame retardant materials.
다단계 분류화기와 적응적 고속 영역탐색을 이용한 프랙탈 영상압축
이재훈,김웅찬,이근영 成均館大學校 科學技術硏究所 1995 論文集 Vol.46 No.2
본 논문에서는 프랙탈 영상 압축과정에 있어서, 영상의 크기와 영상의 영역 활동도에 따른 가변적 블록 분할 및 시각 특성을 이용한 다단계 영역별 분류화기를 설정함으로서, 각 영상에 따라 변환되는 블록의 수를 줄여 압축률 및 부호화 시간을 개선하였다. 또한, 부호화 하고자 하는 영상을, 각기 다른 해상도를 지니는 다단계의 계층적 영상 영역에서 탐색을 함으로서 탐색 시간의 효과적인 감소와 더불어 더욱 신뢰성 있는 프랙탈 변환식을 찾을 수 있게 되었다. 기존의 영상 공간 영역 상에서의 MSE(Mean Square Error)를 이용한 블록 탐색 방법과는 달리, DTC(Discrete Consine Transform)변환식의 계수를 이용한 주파수 영역에서의 3차원 분류화기를 설계하여 변환영역에서 고속의 블록 탐색 알고리듬을 제안하였다. 또한 복원된 영상의 블록화 현상에 따른 화질 저하를 개선하기 위하여 복원 필터를 설계하였다. 본 논문에서는 에지(edge)의 방향성과 시각 특성을 고려한 영상 영역의 클래스 속성에 따른 분류와 트랜스폼 영역에서의 고속 블록 탐색을 수행하였다. 본 논문에서는 Ramamurthi와 Gersho^1) 에 의해 제안된 공간 영역에서의 분류와, 기존의 공간 영역에서의 광범위한 블록탐색에 비하여 빠른 코딩 속도 및 낮은 비트율과 상대적으로 우수한 화질개선을 이루었다.