http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김용범(YongBum Kim),최홍묵(HongMook Choi),최명렬(MyungRyul Choi) 한국정보과학회 2003 한국정보과학회 학술발표논문집 Vol.30 No.2Ⅰ
본 논문에서는 한국 정보보호진흥원에서 개발한 128 비트 블록 암호 알고리즘인 SEED VHDL로 설계하였으며, FPGA의 구현으로 성능 분석을 하였다. 암호화 과정에서의 라운드 키 생성과정을 복호화 과정에서도 동일하게 적용할 수 있게 설계하여 처리속도를 향상시켰고 라운드키 생성과정과 F 함수에서 사용되는 5개의 G함수를 하나의 G함수로 공유하여 게이트 수를 감소시켰다. Xilinx사의 Virtex XCV300 FPGA에 구현하였으며 합성결과 게이트 수는 10,610 개이고 최대 40㎒에서 동작하여 35.7Mbps로 암호화를 수행 할 수 있다.
혁신적 신제품의 수요 불확실성에 대한 브랜드 대안의 수의 효과
김용범(Kim, Yongbum),최자영(Choi, Jayoung) 한국마케팅학회 2017 마케팅연구 Vol.32 No.3
신제품은 기존 제품을 다소 개선한 점진적 신제품과 기존 제품이 제공하지 못한 새로운 기능이나 혜택을 소비자에게 제공하는 혁신적 신제품으로 구분할 수 있다. 기존 선행연구에서는 주로 신제품 유형이나 소비자 심리에 따라 신제품 채택이 어떻게 달라지는지를 연구하였으나 소비자 심리 외에 브랜드와 같은 외재적 요인에 의해서도 채택의도가 달라질 수 있다. 본 연구에서는 그 외재적 요인으로 브랜드 수를 제시하였으며, 브랜드 구색 크기라는 개념을 제안하였다. 본 연구에서는 브랜드 구색 크기가 혁신적 신제품의 수요 불확실성을 감소시켜 제품평가에 긍정적인 영향을 미치나 이러한 효과가 점진적 신제품에서는 나타나지 않을 것이라고 가설을 수립하였다. 총 3개의 실험을 진행하여 가설을 검증하였다. 실험 1에서 혁신적 신제품의 구매의도는 브랜드 구색 크기가 큰 조건이 브랜드 구색 크기가 작은 조건보다 높았으나, 점진적 신제품의 구매의도는 브랜드 구색 크기에 따라 달라지지 않았다. 실험 2와 3에서도 실험 1과 유사하게 혁신적 신제품에 대한 브랜드 구색 크기의 긍정적인 효과를 확인할 수 있었다. 추가적으로, 실험 2와 3에서는 신제품 유형과 브랜드 구색 크기의 상호작용에 대한 수요 불확실성의 매개효과를 검증하였다. 분석결과, 실험 2와 3에서 모두 혁신적 신제품 평가에 대한 브랜드 구색 크기의 긍정적인 효과는 수요 불확실성에 의해 매개되는 것으로 나타났다. A new product can be classified as either an Incrementally New Product (INP), which provides a slight improvement over the existing product, or a Really New Product (RNP), which comes with radically new functions or benefits. Prior research regarding new products has revealed that most articles are focused on what causes variations in the adoption rate of new products, given the type of new products and factors related to consumer behavior. However, we believe that extrinsic factors, such as brands, may affect consumers" attitude toward a new product. Therefore, this article suggests brand assortment size, i.e., the number of brands available for the consumer, as an extrinsic factor. We propose that the brand assortment size leads to a more favorable evaluation of RNPs by reducing the demand uncertainty, but this effect does not occur for INPs. In three separate studies, we examine the effect of brand assortment size on purchase intention toward new products. Study 1 demonstrates the interaction effect between the type of new products and the brand assortment size. Specifically, in the RNP case, participants with large brand assortment have higher purchase intention compared to the participants with lower brand assortment. However, the positive effect of brand assortment size does not appear in the INP case. Studies 2 and 3 replicate these findings and show that the positive effect of brand assortment size is mediated by demand uncertainty.
3D 수치해석을 이용한 타이어 몰드용 AC7A 주조재의 열변형 분석
김용범(Yongbum Kim),오율권(Yoolkwon Oh) 한국트라이볼로지학회 2007 한국트라이볼로지학회 학술대회 Vol.2007 No.6
The present study numerically investigated on the thermal deformation of AC7 A casting material for tire mold using a finite element method (FEM). 3D analysis model. An analysis model was selected that tire mold is actually produced in a manufacturing factory and its manufacturing system was applied the method of metal casting. Also, AC7A casting material, which one of Al-Mg system alloy, was selected as a casting material of tire mold. The numerical study was performed that the temperature, displacement and stress distribution occurred inside of tire mold was calculated by commercial code "COMSOL Multiphysics" applying the FEM. The numerical results reveal that temperature distributions inside of tire mold occurred a rapid cooling from the beginning the injection of casting material to 20 minutes. Also, the results of displacement and stress distribution were predicted at the measurement points of tread part 감om the temperature results. In the end, introduced technique of numerical method in this study will be easily predicted the thermal deformation of casting material and will be utilized as an important data in the industries associated with mold manufacturing.
타이어 몰드의 정밀주조를 위한 알루미늄 합금 금형의 열적특성 고찰
김용범(Yongbum Kim),양호동(Hodong Yang),오율권(Yoolkwon Oh) 한국자동차공학회 2007 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
This study numerically and experimentally investigated on thermal characteristics of aluminum alloy (Al-alloy) mold for precision casting of automobile tire mold. The Al-alloy tire mold was selected the produced tire mold in a manufacturing factory and its manufacturing system was applied the method of metal casting instead of sand casting. When the AC7A selected as a casting material is injected to inner casting device, the temperature, displacement and stress distributions occurred inside of Al-alloy tire mold until completed solidification of its were numerically calculated by finite element method (FEM). Also, the temperature distribution was experimentally measured under the same condition of numerical analysis. The results of numerical study revealed that temperature distribution inside of Al-alloy tire mold occurred a rapid cooling from the beginning injection of casting material to about 20 minutes. And, the results of displacement and stress distributions and patterns were happened at the measurement points of tread part due to the rapid temperature difference in mold. Moreover, the result of experimental study revealed that temperature distribution also measured the similar pattern as a numerical study during the cooling time about 20 minutes.