http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오늘 본 자료
잔골재 대체재로서 석탄회를 이용한 초속경 보수모르타르의 기초적 특성에 관한 연구
이건철,오동욱,김영근,조정기,Lee, Gun-Cheol,Oh, Dong-Uk,Kim, Young-Geun,Cho, Chung-Ki 한국건설순환자원학회 2011 한국건설순환자원학회지 Vol.6 No.1
본 연구에서는 산업부산물로서 재활용율이 낮은 바텀애쉬와 혼화재를 이용하는 에코개념의 터널 보수용 초속경 그라우트 모르타르 개발을 목적으로 실시공 환경조건의 온도하에서 초속경 그라우트 모르타르의 기초적 특성에 대하여 검토하였다. 실험결과, 유동성 및 응결시간은 B > C > A type 순으로 크게 나타났으며, 온도조건별로는 상온보다 저온에서 더 지연되었다. 압축강도, 휨강도, 부착강도는 3 type 모두 비슷하게 나타났는데, 압축강도는 저온조건에서는 초기에 강도가 작았지만 장기재령에서는 상온조건과 유사한 강도가 나타났고, 휨강도는 초기에는 강도가 유사했지만 장기재령에서는 상온조건이 크게 나타났으며, 부착강도는 상온조건보다 저온조건이 평균 35 % 저하되었다. 길이변화는 A > C > B 순으로 저온조건이 상온조건보다 2배로 나타났으며 고로슬래그 미분말을 취환한 경우 현저히 감소되었다. 물흡수 계수 및 습기투과 저항성은 C > A > B 순으로 크게 나타났고 바텀애쉬를 치환할 경우 다공질의 영향으로 크게 증가되었다. In this study, in order to develop ultra rapid hardening mortar(URHM) for tunnel repairs using bottom ash of low recycle ratio and Admixture as Eco concept, fundamental properties of URHM on temperature condition of construction field were performed. Test result, URHM of three types for fluidity and setting time were as in the following : B > C > A. Those for low temperatures were later than the standard condition. Compressive, bending and bond strength were similar with three types as follow. In compressive strength, initial strength of the low were smaller than the standard but the low in the long-term were similar with the standard. On the contrary to this, bending strength were similar in initial strength but the low in the long-term were smaller than the standard. The low in bond strength was average 35% less than the standard. Length changes was as in the following : A > C > B. the low is two times much as the standard but the case using blast furnace slag particles noticeably reduced length changes. Water absorption coefficient and water vapor resistance were as in the following : C > A > B. In case of URHM added bottom ash, water absorption coefficient and water vapor resistance were increased because bottom ash is porous material.
잔골재 대체재로서 바텀애쉬를 이용한 초속경 그라우트재의 수밀성 및 내구특성
이건철,오동욱,조병영,김영근,조정기,Lee, Gun-Cheol,Oh, Dong-Uk,Cho, Byoung-Young,Kim, Young-Geun,Cho, Chung-Ki 한국건설순환자원학회 2011 한국건설순환자원학회지 Vol.6 No.3
본 연구에서는 산업부산물로서 재활용율이 낮은 바텀애쉬와 혼화재를 이용하는 에코개념의 터널 보수용 초속경 그라우트 모르타르 개발을 목적으로 실시공 환경조건의 온도하에서 초속경 그라우트 모르타르의 수밀성 및 내구특성에 대하여 검토하였다. 수밀성으로 투수량 및 물흡수계수는 석탄회를 이용하는 시리즈 II의 경우가 증가하는 것으로 나타났으며, 온도조건별로는 $20^{\circ}C$ 양생조건이 $5^{\circ}C$ 양생조건 보다 투수량이 적은 것으로 나타났다. 또한, 본 연구범위 모든 시료는 KS F 4042(콘크리트 구조물 보수용 폴리머 시멘트 모르타르) 투수량 기준인 20g 이내를 만족하는 것으로 나타났다. 내구성으로 중성화 저항성은 고로슬래그 미분말로 치환 사용에 따른 단위시멘트량 감소로 약간 저하하는 것으로 나타났다. 또한, 내알칼리성 및 내산성 결과는 시리즈 I의 경우 수산화칼슘용액에 침지후의 압축강도가 침지전의 압축강도에 비해 저하하는 것으로 나타났다. 반면, 시리즈 II의 경우 강도저하가 미비한 것으로 나타났으며, $5^{\circ}C$ 양생조건의 경우 C 타입의 시멘트를 제외하고는 28일 재령의 압축강도와 동등한 값을 나타내어 고로슬래그 미분말 및 버텀애쉬를 치환 사용한 경우 내알칼리성 및 내산성이 큰 것 알 수 있었다. In this study, in order to develop ultra rapid hardening mortar(URHM) for tunnel repairs using bottom ash of low recycle ratio and Admixture as Eco concept, watertightness and durability properties of URHM on temperature condition of construction field were performed. Test result, seepage quantity and water absorption coefficient regarding watertightness of URHM were as in the following : series II > series I. Seepage quantity for the standard condition were smaller than low temperatures. all specimens were satisfied below 20g as standards of seepage quantity on KS F 4042. Because of the decrease of unit cement content by to replacement of blast furnace slag, the neutrlization resistance for durability properties was reduced. The result of alkali resistance and acide resistance, compressive strengths for specimens soaked in calcium hydroxide solution of seriesI were lower than compressive strengths for specimens not soaked. On the other hand, the case of series II show that the deterioration of compressive strengths for specimens was not almost showed. Compressive strengths of specimens soaked were similar with specimens not soaked except series II-C in $5^{\circ}C$. Therefore, specimens using both blast furnace slag and bottom ash were good in alkali resistance and acide resistance.
산업부산물을 이용한 유무기 복합 자전거 도로 포장재의 기초적 특성
오동욱,이건철,김영근,조정기,김나영,Oh, Dong-Uk,Lee, Gun-Cheol,Kim, Young-Geun,Cho, Chung-Ki,Kim, Na-Young 한국건설순환자원학회 2011 한국건설순환자원학회지 Vol.6 No.3
본 연구에서는 산업부산물로서 고로슬래그 미분말을 이용하는 유무기 복합 자전거 도로 포장재의 개발을 목적으로 바인더 대비 아크릴 수지의 최적 배합 및 고로슬래그 미분말의 최적 치환량 검토에 대한 기초적 특성을 살펴보았다. 실험결과, 아크릴 수지의 비율이 증가할수록 응결시간은 지연되어 플로는 증가하고 재료분리가 발생하며, 강도는 감소하고, 길이변화율은 증가하는 경향이 나타났다. 아크릴 수지의 최적 배합은 작업성을 유지하면서 높은 강도를 발현한 아크릴 수지가 40%인 배합이 최적인 것으로 판단된다. 또한 고로슬래그 미분말은 치환량이 증가할수록 응결시간이 지연됨에 따라 재료분리가 일어나 아크릴 수지와 바인더가 분리되고, 강도가 저하되는 경향이 나타났다. 고로 슬래그 미분말의 치환량이 40% 이하에서 목표 물성을 만족하였다. In this study, in order to develop organic-inorganic hybrid packaging materials(PM) of bike paths using blast furnace slag(BS) as industrial by-products, fundamental properties of organic-inorganic hybrid packaging materials were performed. Test result, the increase of Acryl emulsion polymer(AEP)/binder(B) ratios tends to delay the setting time, to increase the table flow, to decrease the strength by material segregation and to increase the length change. The optimal mix proportion of AEP decides on 40%(AEP/B) due to workability and high strength. The increase of BS replacement ratios also tends to delay the setting time, to separate AEP from B and to decrease the strength by material segregation. When BS replacement ratios were lower than 40%, they are satisfied with goal properties.