http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Moringa oleifera 씨앗의 탁도 제거 시 초기 탁도와 응집제주입량 최적화
김봉민(Bong Min Kim),이희윤(Hee Yun Lee),안종화(Johng-Hwa Ahn) 대한환경공학회 2020 대한환경공학회지 Vol.42 No.2
목적 : Moringa oleifera 씨앗 응집제를 이용한 탁도 제거 공정에 최적 조건을 도출하고자 한다. 방법 : 응집실험은 합성폐수를 Jar Tester를 이용하여 급속교반(90-250 rpm; 1-2분), 완속교반(10-60 rpm; 10-50분), 초기 탁도(100-500 NTU), 응집제주입량(200-1,500 mg/L), pH (2-12) 등의 조건에서 진행하였다. 초기 탁도와 응집제주입량의 최적 탁도 제거 조건을 도출하기 위해 반응표면분석법을 사용하였다. 결과 및 토의 : M. oleifera를 이용한 탁도 제거에서 최적 조건은 200 rpm으로 급속교반 1분, 40 rpm으로 완속교반 20분, 그리고 pH 8이었다. 응집효율은 물 시료의 초기 탁도에 좌우되는 것으로 확인되었다. 초기 탁도 500 NTU에서 가장 높은 탁도 제거 효율(96.5%)을 보였다. 초기 탁도와 응집제주입량에 대한 영향은 반응표면분석법을 통해 성공적으로 분석되었다. 실험범위 안에서 탁도 제거효율은 응집제주입량보다 초기 탁도 변화에 더 민감했다. 결론 : 초기 탁도와 응집제주입량의 탁도 제거 모델을 제시하였다. M. oleifera는 높은 탁도의 물에서 잠재적인 응집제로 사용할 수 있다. Objective : Coagulation of Moringa oleifera seeds was studied to determine the optimal conditions in treating a turbid water. Method : Jar-test experiments were performed at various rapid mixing (90-250 rpm; 1-2 min), slow mixing (10-60rpm; 10-50 min), initial turbidity (100-500 NTU), coagulant doses (200-1,500 mg/L), and pH (2-12) in synthetic wastewater. Response surface analysis was used to optimize the coagulation in jar-test experiments. Results and Discussion : The optimal conditions for turbidity removal with M. oleifera were 200 rpm of rapid-mixing speed for 1 min, 40 rpm of slow-mixing speed for 20 min, and pH 8. The coagulation efficiency was found to be dependent on initial turbidity of water samples. Highest turbidity removals (96.5%) were obtained for water with very high initial turbidity (500 NTU). The effects of initial turbidity and coagulant dose were successfully analyzed by the response surface analysis. Within the design boundaries, turbidity removal was more sensitive to changes in initial turbidity than to changes in coagulant dose. Conclusions : The quadratic model between initial turbidity and coagulant for turbidity removal was shown. M. oleifera can be used as a potential coagulant especially for high turbidity water.
레버리지와 기업실패: 생존분석을 응용한 기업규모에 따른 레버리지 영향분석
김봉민(Bong-Min Kim),김병곤(Byoung-Gon Kim),김동욱(Dong-Wook Kim) 한국산학기술학회 2021 한국산학기술학회논문지 Vol.22 No.1
본 연구에서는 기업규모에 따라 레버리지가 기업실패에 미치는 영향에 차이가 있는가를 생존분석을 이용하여 분석하였다. 이를 위해 1999년부터 2019년까지 한국거래소 유가증권시장과 코스닥시장에 상장된 총 25,250개(연도-기업) 기업을 분석하였다. 레버리지의 대용변수로는 총부채지표인 레버리지비율과 단기부채지표인 매입채무와 유동부채비율, 장기부채지표인 비유동부채비율을 사용하였다. 실증분석결과 첫째, 대체로 레버리지의 증가는 기업실패 가능성을 높이는 요인으로 작용한다는 것을 확인하였다. 다만 매입채무비율의 증가는 기업의 실패 가능성을 낮춘다는 것을 확인하였다. 기업의 매입채무 증가가 기업리스크의 확대로 연결되기 보다는 활발한 영업활동의 전개나 무이자부채의 적극적인 활용으로 인식되어 기업실패 가능성을 감소시키는 요인으로 작용하는 것으로 이해되었다. 둘째, 대기업과 중소기업으로 나누어 분석한 결과, 대기업에서는 레버리지비율과 매입채무비율이 높아지면 기업실패 가능성이 낮아진다는 것을 확인하였다. 중소기업의 경우에는 모든 유형의 레버리지 증가는 기업실패 가능성을 높이는 요인이 된다는 것을 확인하였다. 중소기업에서 레버리지의 증가는 기업위험의 증가로 연결되어 기업실패 가능성을 높이는 것으로 이해할 수 있었다. 그러나 대기업의 경우는 레버리지의 증가가 기업위험으로 연결되기 보다는 레버리지효과나 활발한 사업 활동의 전개로 연결되어 기업실패 가능성을 낮추는 작용을 하는 것으로 이해할 수 있었다. 이러한 분석결과에서 레버리지가 기업실패에 미치는 영향은 기업규모에 따라 차이가 있다는 것을 확인할 수 있었다. Survival analysis was used to analyze whether there is a difference in the effect of leverage on corporate failure according to the firm size. A total of 25,250 (year-company) companies listed on the Korea Stock Exchange and KOSDAQ market from 1999 to 2019 were analyzed. First, the increase in leverage generally acts as a factor that increases the possibility of corporate failure. On the other hand, the increase in the trade payable ratio lowered the possibility of failure of the company. The increase in corporate trade payable was perceived as a factor in reducing the possibility of corporate failure because it was considered the active development of business activities or active use of interest-free debt rather than leading to an increase in corporate risk. Second, a higher leverage ratio and trade payable ratio in large firms lowered the possibility of corporate failure. In the SMEs, all types of leverage increases are a factor that increases corporate failure. Overall, the effect of leverage on corporate failure differs according to the size of the company.
매입채무와 기업실패: 생존분석을 응용한 기업규모에 따른 매입채무 영향분석
김봉민(Bong-Min Kim),김소라(So Ra Kim) 한국산학기술학회 2021 한국산학기술학회논문지 Vol.22 No.6
본 연구에서는 매입채무가 기업규모에 따라 기업실패에 미치는 영향에 차이가 있는지를 생존분석을 통해 분석하였다. 이를 위해 1999년부터 2019년까지 한국거래소 유가증권시장과 코스닥시장에 상장된 총 41,781개(연도-기업) 기업을 분석하였다. 매입채무의 대용변수로는 단기부채지표인 매입채무비율을 사용하였다. 분석기간을 전체기간과 금융위기 전, 후로 나누어 분석하였다. 실증분석결과 첫째, 전체기간에서 매입채무의 증가는 중소기업의 기업의 실패 가능성을 높이는 요인이라는 것을 확인하였다. 하지만 대기업에서 매입채무비율과 기업실패 가능성간의 유의적인 영향관계를 확인하지 못하였다. 둘째, 1999년~2007년과 2009년~2019년의 하위기간으로 나누어 분석한 결과에 의하면 중소기업에서는 매입채무 증가가 기업실패 가능성을 증가시키는 요인으로 작용되는 것으로 나타났다. 하지만 대기업의 경우 금융위기 이후의 기간인 2009년~2019년에서 매입채무의 증가는 기업의 실패 가능성을 줄이는 것으로 나타났다. 이것은 매입 채무의 증가가 부채의 증가로 인한 기업리스크의 확대로 연결되기 보다는 활발한 영업활동의 전개나 무이자부채의 적극적인 활용으로 인식되어 기업의 재무적 곤경 리스크를 완화시켜 기업의 실패 가능성을 감소시키는 것으로 이해되었다. 이러한 분석결과에서 매입채무가 기업실패에 미치는 영향은 기업의 규모에 따라 차이가 발생할 수 있다는 것을 알 수 있었다. Survival analysis was used to determine whether there are differences in the impact of trade payables on business failure according to the size of the company. A total of 41,781 firms from 1999 to 2019 were analyzed. The analysis period was divided into the entire period and before and after the financial crisis. The trade payable ratio is a proxy variable. The increase in trade payables over the entire period increases the possibility of business failure of Small and Medium Enterprises (SMEs). However, in large firms, a significant relationship between the increase in the trade payable ratio and the possibility of corporate failure could not be confirmed. Second, in SMEs during the sub-periods of 1999-2007 and 2009-2019, it was found that an increase in trade payables acts as a factor that increases the possibility of corporate failure. However, in large corporations, the increase in trade payables in the period from 2009 to 2019 has been shown to reduce the rate of failure. An increase in trade payables is recognized as the active development of business activities or the active use of interest-free debt. Therefore, it was confirmed that the impact of trade payables on corporate failure differs depending on the size of the company.