http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
컴포넌트 기반 개발을 위한 기존 애플리케이션 클래스의 JavaBean으로의 변환
김병준,김지영,김행곤,Kim, Byeong-Jun,Kim, Ji-Yeong,Kim, Haeng-Gon 한국정보처리학회 2002 정보처리학회논문지D Vol.9 No.4
소프트웨어 부품화는 소프트웨어 개발에 있어서의 궁극적인 목표이다. 컴포넌트 기반의 개발은 이러한 재사용의 초점을 코드에 의한 수동적인 조작이나, 클래스 라이브러리보다 발전된 형태인 컴포넌트에 초점을 두고 있다. 컴포넌트 구축은 컴포넌트 모델에 적합한 새로운 소프트웨어 컴포넌트를 재개발 해야하는 비효율성으로 인해 추가적인 노력과 비용을 야기 시킨다. 최근 많이 사용되고 있는 자바 응용시스템의 경우 자바 언어 기반의 컴포넌트 모델이 존재하지만, 소규모의 재사용 단위나 제한된 GUI 컴포넌트 개발에만 머무르고 있어, 컴포넌트로의 기능을 충분히 발휘하지 못하거나 추가적인 비용, 노력이 필요하며 또한 특정 도메인 컴포넌트에서만 제한적이다는 단점이 있다. 따라서, 본 논문에서는 기존의 자바로 개발된 응용시스템을 기반 하여 자바의 컴포넌트 모델인 자바빈즈를 적용하기 위해, 컴포넌트를 확장 추출하고, 재사용단위로서 비즈니스 로직의 부분적인 수용을 통해 이 응용시스템에서의 자바빈즈로 변환하는 프로세스를 제시하고 알고리즘을 제안한다. Reusable software component is an ultimate goal for the software development. Component based development is focused on advanced concepts rather than passive manipulation or class library with source codes. However, the primary component construction in component based development lead to an additional development cost and effort for reconstructing the new software component within a component model. Java application provides several features based on component model. But, we only have an opportunity to develop the smallest reuse units or the restricted set of GUI components. It cannot contributed as a component and only used in the specific domain component with high cost and efforts. In this paper, we apply java component model to the existing java application and extract javabeans through extending the component scalability. We also discuss the algorithm for transformation mechanism from legacy class to javabeans with a partial of business logic.
개선된 다운힐 심플렉스 법을 이용한 주파수 영역에서의 뇌자도 신호원 추정
김병준,안광옥,이찬희,정현교,Kim, Byeong-Jun,An, Kwang-Ok,Lee, Chany,Jung, Hyun-Kyo 대한의용생체공학회 2008 의공학회지 Vol.29 No.3
Nelder-Mead downhill simplex method (DSM), a kind of deterministic optimization algorithms, has been used extensively for magnetoencephalography(MEG) dipolar source localization problems because it dose not require any functional differentiation. Like many other deterministic algorithms, however, it is very sensitive to the choice of initial positions and it can be easily trapped in local optima when being applied to complex inverse problems with multiple simultaneous sources. In this paper, some modifications have been made to make up for DSM's limitations and improve the accuracy of DSM. First of all, initial point determination method for DSM using magnetic fields on the sensor surface was proposed. Secondly, Univariant-DSM combined DSM with univariant method was proposed. To verify the performance of the proposed method, it was applied to simulated MEG data and practical MEG measurements.
김병준,Kim, Byeong-Jun 대한출판문화협회 1992 출판저널 Vol.105 No.-
어린이 문제에 있어서 항상 그렇듯이 아동도서에는 '안됨'이라는 용어가 너무 난무하다. 과학입국을 부르짖으면서 공상과학소설은 허무맹랑해서 안되고, 할아버지의 무릎에서 자신은 무시무시한 옛날 이야기를 즐겼으면서 괴기소설은 안되고, 추리소설은 비인간적이니 안되고, 삽화가 만화적이어도 읽어서는 안된다고들 말한다.
김병준,김수현,곽윤근,Kim, Byeong-Jun,Kim, Su-Hyeon,Gwak, Yun-Geun 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.12
To enhance the effective data transfer rate the multi-beam optical disk drive is presented. The Beam rotating actuator is necessary for putting multi-beam on more than one track. Ray tracing was also executed for real system set-up. The beam Rotating Actuator is made up of piezoelectric material, high stiffness wire hinge and dove prism. The actuator has about 1kHz natural frequency and suitable operational range. The dynamic equation for the actuator is derived for the control real system.
김병준,조용식,Kim,Byeong Jun,Cho,Yong-Sik 한국방재학회 2014 한국방재학회논문집 Vol.14 No.1
최근 파괴적이고 예상하기 힘든 지진해일이 발생하고 있고 이에 따라 지진해일 방재대책의 필요성이 급격히 증가하고 있다. 본 연구에서는 수치모의를 통한 방법과 통계적인 방법을 결합하여 지진해일의 파고를 예측하고 최적분포형의 도출 방법을 제시하였다. 수치모의를 통해 지점별 최대해일고를 추출하였고, 이 해일고를 표본으로 L-모멘트법을 적용하였다. L-모멘트를 통해 산출된 통계치를 L-모멘트 비 다이어그램에 적용하여 동해안에 대한 최적 분포형을 산정하였다. 동해안 전역에 대한 지진해일 분포형은 주로 Generalized Pareto 분포임을 확인했다. Recently, the necessity for mitigation against devastating and unexpected tsunami attacks is significantly increasing. In this study, a combination of numerical and statistical techniques was used to estimate tsunami heights and investigate a best-fit distribution. By using a numerical simulation, tsunami heights were obtained along the Eastern Coast of the Korean Peninsula and they were used for applying L-moment method as the sample data. The best-fit distributions were determined by an L-moment ratio diagram. The distribution of tsunami heights along the Eastern Coast of the Korean Peninsula was mainly represented by the generalized Pareto distribution.
김병준,맹승진,류경식,이순혁,Kim, Byeong-Jun,Maeng, Sung-Jin,Ryoo, Kyong-Sik,Lee, Soon-Hyuk 한국농공학회 2004 한국농공학회논문집 Vol.46 No.3
This research seeks to derive the design rainfalls through the L-moment with the test of homogeneity, independence and outlier of data on annual maximum daily rainfall at 38 rainfall stations in Korea. To select the appropriate distribution of annual maximum daily rainfall data by the rainfall stations, Generalized Extreme Value (GEV), Generalized Logistic (GLO), Generalized Pareto (GPA), Generalized Normal (GNO) and Pearson Type 3 (PT3) probability distributions were applied and their aptness were judged using an L-moment ratio diagram and the Kolmogorov-Smirnov (K-S) test. Parameters of appropriate distributions were estimated from the observed and simulated annual maximum daily rainfall using Monte Carlo techniques. Design rainfalls were finally derived by GEV distribution, which was proved to be more appropriate than the other distributions.