http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
선박의 운항 안전성 지원을 위한 지능형 안전관리 시스템 개발
김배성,우윤태,황훈규 한국정보통신학회 2023 한국정보통신학회논문지 Vol.27 No.3
Recently, the entire industry is developing due to the application of the fourth Industrial Revolution technology. In the field of maritime, research is being conducted for unmanned ship and smart ships by applying new technologies. Although technologies are improving, the prevention effect of marine accidents is insignificant. Many ships are still causing accidents such as collision and stranding, which causes losses of both life and property every year. Such accidents are mainly caused by crew in operation, and support technology is needed to prevent accidents caused by human error. Therefore, this paper deals with a development of intelligent system that support ship safety management. This was designed with an intelligent safety management terminal and two types of safety management services provided through a planned route safety algorithm and a collision risk algorithm. A system was developed based on the design, and its usefulness was verified by testing based on a full mission ship simulator. 최근 4차 산업혁명 기술이 적용에 의해 산업 전반이 발전하고 있다. 조선해양 분야에서도 신기술이 적용하여 선박의 무인화, 스마트화를 위한 연구가 진행되고 있다. 하지만 이러한 전환 속에서도 해양사고의 예방 효과는 미미한 수준으로 많은 선박이 충돌이나 좌초 등의 사고를 일으키고 있으며, 이로 인한 인명과 재산 피해가 매년 발생하고 있다. 이러한 사고는 승조원의 운항과실이 주요원인이며, 인적오류에 의한 사고를 방지하기 위한 지원 기술이 필요하다. 따라서 본 논문에서는 선박의 안전관리를 지원하는 지능형 시스템 개발에 대하여 다룬다. 시스템은 지능형 안전 관리 터미널과 이에 연동된 계획항로 안전성 알고리즘 및 충돌 위험성 알고리즘을 통해 제공하는 안전관리 서비스 2종으로 설계하였다. 설계를 바탕으로 시스템을 개발하였고, 선박 운항 시뮬레이터를 기반으로 테스트하여 유용성을 검증하였다.
김배성,김화년,김만근,고성보 한국산학기술학회 2020 한국산학기술학회논문지 Vol.21 No.7
The acreage of tangerines in the U.S. sharply rose from 19,000 ha in 2009 to 27,000 ha in 2016, an increase of 42% in 7 years. Considering the recent surge in tangerine exports to Japan, the export volume of 6-7 thousand tons is highly likely to increase in the future. Therefore, the purpose of this study was to analyze the economic impact of U.S. tangerine imports on the Korean citrus industry under various scenarios. In order to examine the possibility of imports of U.S. tangerines, the unit price of U.S. exports to Japan was used since U.S. tangerines are not imported to South Korea. Citrus fruits are divided into field citrus, house citrus, and late-maturing citrus (including winter season citrus) based on the cultivation method and variety used to analyze. Considering both the field and house seasons, the import volume of U.S. tangerines can be expected to rise from roughly 4,700 tons in 2021 to 10,000 tons in 2027. Imports of U.S. tangerines may be pushed up or delayed depending not only on the harvest method and quality of domestic field and house citrus but also on the harvest of U.S. tangerines. However, it is necessary to note that tangerines could be imported after 2021, when the tariff rate on U.S. tangerines will fall below 50%.
조선해양 CAD 기반 용접검사 정보 자동 추출 시스템 개발
김배성,황훈규,송창섭,이기택,Kim, Bae-Sung,Hwang, Hun-Gyu,Song, Chang-Sub,Lee, Ki-Taek 한국정보통신학회 2020 한국정보통신학회논문지 Vol.24 No.1
조선소에서 이루어지는 선박 건조는 용접에 의해 수행되고 있으며, 친환경선박에 대한 국제적인 요구에 따라 용접물량은 증가하고 있다. 용접부는 비파괴검사를 통하여 품질을 보증하고 있으며, 검사 정보를 나타내는 리포트는 인력이 설계된 도면을 확인하여 수작업으로 용접검사 리포트가 작성된다. 이 과정에서 소요되는 많은 공수와 인적오류로 인하여 손실이 발생하고 있다. 이러한 문제 해결을 위해 본 논문에서는 조선 전용 CAD 소프트웨어를 기반으로 설계된 데이터를 입력하여 용접검사에 관한 리포트가 자동으로 생성되는 시스템에 대하여 다룬다. 개발하는 시스템은 모델링의 도면으로부터 형상 데이터를 분석하여 부재 면의 확장을 통해 용접부를 판단 및 태그 넘버를 생성하고, 용접길이, 두께, 재질 등 검사에 필요한 정보를 자동으로 추출하는 기능을 제공한다. 시스템의 유용성을 검증하기 위해 시스템을 통해 추출된 검사 정보와 모델링 도면을 비교하여 일치하는 것을 확인하였다. In shipbuilding industry, there is conducting most of works by welding at the shipyard, and the volume of welding is increasing with international trends of green ships. Welding joint is guaranteed quality through non-destructive testing (NDT). The manual welding inspection report is produced by identifying the drawings designed, which results in losses the many workforce and occurs human errors. To solve these problems, this paper covers a system that reports on inspection information is automatically generation by input data based on shipbuilding-specific CAD. The developed system analyzes the shape data from drawings of modeling. Also, the system determines welding joints through expansion of the part boundary and generates tag numbers. In addition, it provides the function to automatically extract the information needed for inspection such as weld length, thickness and etc. We conducted test to verify the usefulness of the developed system and confirmed that the welding inspection information extracted through system matches the information shown in drawings of modeling.
OECD 세계 농업전망모형(Aglink)을 이용한 쌀 국제수급 전망
김배성 한국농촌경제연구원 2005 농촌경제 Vol.28 No.2
This paper includes a review and an analysis of current status and outlook(2005~2013) of world rice supply and demand. The OECD-aglink model is used for this study. OECD-aglink model is a recursive dynamic demand-supply partial equilibrium model of the world agricultural sector. The model was developed by the OECD secretariat in cooperation with member countries during 1993 and has been used to carry out the OECD world agricultural outlook and simulate for various policy analysis.