http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고유동 흙막이 벽체 재료의 역학적 성능 및 내구성에 대한 강섬유 혼입률의 영향
김동규,이승태,Donggyu Kim,Seungtae Lee 한국지반환경공학회 2023 한국지반환경공학회논문집 Vol.24 No.6
This paper is aimed to evaluate the mechanical properties and durability of high-flowable retaining wall material (RWM) with different levels of steel fiber (SF) content. To produce the specimens of RWM, some chemical agents such as superplasticizer (SP), air-entrained agent (AEA) and viscosity modifying agent (VMA) were added in the fresh RWM. The compressive and split tensile strength measurements were performed on the hardened RWM specimens at the predetermined periods. Additionally, surface electric resistivity and absorption tests according to ASTM standards were carried out to examine mechanical properties of RWM mixes. The durable performances such as chloride ions penetrability and freezing-thawing resistance of RWM mixes were experimentally investigated. As resutls, it was found that the performance of RWM mix with SF were much better than that without SF, especially at the 2% addition of SF. Thus, it is noted that the proper addition of SF in the RWM mix may have a beneficial effect to improve mechanical properties and durability of RWM mixes.
김동규,윤원식,Kim, Donggyu,Yoon, Wonsik 한국정보통신학회 2012 한국정보통신학회논문지 Vol.16 No.10
신호수신시스템은 수신신호의 주파수, 펄스변조, 스캔 변조, 펄스내 위상변조, 펄스내 주파수 변조 등 다양한 신호에 대한 측정 및 분석능력을 보유하여야 한다. 이러한 신호수신시스템의 성능을 평가하기 위하여 신호원들을 실험실 환경에서 효율적으로 모의발생하고 다수 전파가 존재하는 실제 운영환경과 유사한 복잡한 전파환경을 모의발생할 수 있는 효율적인 신호원 발생기를 제안한다. 제안한 모의전파신호원을 신호수신시스템 개발 전 과정에 걸쳐 활용할 경우 정확한 성능 검증 및 시험 비용을 절감할 수 있다. A signal receiving system can measure and analyze frequency, pulse modulation, scan modulation, frequency modulation on pulse, phase modulation on pulse of RF signal. A signal receiving system should be verified under simulated RF signal environment prior to verification on operation in fields. This paper describes an effective method to generate simulated RF signals with considering operational scenario. The simulated RF signal generator can be effectively used to evaluate the performance of the signal receiver and reduce the test cost of the signal receiver.
토크 벡터링을 적용한 인휠 시스템 차량의 핸들링 특성 연구
김동규(Donggyu Kim),최승렬(Seung-ryul Choi) 한국자동차공학회 2018 한국자동차공학회 부문종합 학술대회 Vol.2018 No.6
High-tech battery and high-efficient electric motor make vehicle get changed and turned themselves out to be electrical. With this trend of vehicle development, In-Wheel System-ed Motor is being developed as a power source of Electrical Vehicle(EV). Because In-Wheel System-ed vehicle move their power source into each wheel, vehicle can improve handling performance, stability and chassis response by independent control of each wheel. So this system make driving and regenerative braking torque on each wheel independent by applying Torque Vectoring(TV). Which means vehicle can control their whole body phase by TV. It enable vehicle to get more active body control and improve handling performance than conventional AWD system. But force from road to axis of In-Wheel System make vibration for whole system. These unstability of axis cause NVH problem, fatigue, durability of bearing. And the idea and implementation of TV control algorithm are both complex. This paper classifies In-Wheel system-ed vehicle with dynamic bearing and gear model. We do simulation for mechanical load analysis of the In-wheel system and standard handling test of full-vehicle for verification of TV algorithm.
준설 실트질 점토를 이용한 경량기포혼합토의 압축강도 특성
김동규(Donggyu Kim),윤여원(Yeowon Yoon),윤길림(Gillim Yoon) 한국지반환경공학회 2017 한국지반환경공학회논문집 Vol.18 No.5
본 연구에서는 실트질 점토와 동물성 기포제 및 시멘트로 제작한 경량기포혼합토의 공학적 특성을 고찰하는 시험을 수행하였다. 현장의 경량기포혼합토는 도로를 위한 연약지반상 성토 및 기존도로의 확장 구간에 성토재료로 사용되어 왔다. 현장에서는 주로 제작 직후의 단위중량과 흐름치를 측정하여 품질관리를 하고 있으며, 실내 시험을 통해 압축강도시험으로 확인한다. 본 연구의 주목적은 경량혼합토의 다른 특성과 흐름치 관계와 더불어 흐름치로부터 시방서에서 요구하는 압축강도를 예측하고자 하는 것이 주요 목적이다. 연구 결과, 준설토의 함수비가 클수록 높은 유동성으로 인해 흐름치가 증가하였고 재료분리로 인해 타설 깊이에 따른 단위중량이 증가하였다. 60cm의 시료 하부는 상부에 비하여 약 2배의 압축강도를 나타내었다. 현장에서의 품질관리는 주로 흐름치에 의존하게 되므로 흐름치와 혼합토의 압축강도를 선행적으로 예측할 수 있도록 Yoon & Kim(2004)이 제시한 정규화계수와 의 상관관계를 제시함으로써 흐름치로부터 압축강도를 예측할 수 있도록 하였다. 또한, 흐름치와 정규화계수와의 관계를 제시하였으며 이관계로부터 정규화계수를 산정하고, 이로부터 계산한 압축강도와 실내시험 압축강도를 비교한 결과, 준설토의 초기함수비가 높을수록 유사한 관계가 나타났다. 따라서, 흐름치와 정규화계수의 상관관계를 통해 압축강도를 사전에 예측하여 설계 단계에서 반영할 필요성이 있다고 판단된다. In this research, laboratory tests were carried out to investigate the engineering properties of Light-Weight Air Foamed Soil (LWAS) based on silty clays with the animal foaming agent and cement. LWAS has been used as an embankment material over soft ground for road and side extension of the existing road. In field, unit weight and flow value is measured right after producing in mixing plant in order to control the quality of LWAS, and laboratory tests are carried out to confirm the quality through compressive strength of LWAS as well. In this research, direct estimation of the specification requirement of strength using flow values in field is the main purpose of the study together with other characteristics. From the test results, it can be seen that flow values increase with the initial water content and unit weight increases with the depth due to material segregation. Compared to the upper specimen, lower end of 60 cm specimen shows about 2 times higher compressive strength. Relationship between flow values and normalized factor presented by Yoon & Kim (2004) was presented. With that relationship, compressive strength can be predicted from flow values in field. From the relationship, the normalized factor was calculated. Thereafter calculated compressive strengths according to the flow values were compared to measured strengths in the laboratory. The higher the initial water content of the dredged soil has, the better relationship between predicted and measured shows. Therefore it is necessary to predict the compressive strength in advance through the relationship between the flow value and the normalized factor to reflect it in the design stage.