http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
레이놀드 수에 따른 색소 젯트의 특성 및 색소레이저의 출력변화
김성호,고도경,이종민,임권,조재흥,장수,Kim, Sung Ho,Ko, Do-Kyeong,Lee, Jong-Min,Lim, Gwon,Jo, Jae-Heung,Chang, Soo 한국광학회 1994 한국광학회지 Vol.5 No.4
레이놀드 수에 따른 색소 젯트의 공간적인 편평도를 마이켈슨 간섭계를 이용하여 분석하였다. 레이놀드 수 600(유속 12m/s)일 때 색소 젯트의 편평도는 최적 조건을 보였다. 이러한 색소 젯트의 최적 조건하에서 종펌핑 Littman형 색소레이저 빔은 펌프 에너지 0.5-1.0mJ/pulse의 범위에서 단일 종모우드로 발진되었다. 이 때의 선폭은 470MHz이었고, 변환 효율과 빔 발산각은 각각 4.7%, 3mrad이었다. The spatial flatness of dye jet depending on the Reynold's number has analyzed by using a Michelson interferometer. When the Reynold's number of dye jet was 600, the flatness of the flow was the best. Under this condition, the dye laser with Littman-type configuration has been operated in a single longitudinal mode at the pumping energy of 0.5~1.0 mJ/pulse. The conversion efficiency and beam divergence were 4.7% and 3 mrad, respectively. ively.
레이저 빔의 파면 측정을 통한 비축 포물 거울의 성능 평가 및 정렬 오차 민감도에 관한 연구
정태문,최일우,고도경,이종민,Jeong, Tae-Moon,Choi, Il-Woo,Ko, Do-Kyeong,Lee, Jong-Min 한국광학회 2006 한국광학회지 Vol.17 No.3
본 논문에서는 비축 포물 거울을 통과한 레이저 빔의 파면을 측정하는 방식으로 국내 및 국외에서 제작된 비축 포물 거울을 평가하였으며, 이로부터 비축 포물 거울의 집속 성능 및 정렬 민감도를 측정하였다. 국외에서 제작된 비축 포물 거울은 직경 약 34 mm의 레이저 빔에 대해 고차 파면 수차(higher-order aberration)의 rms 값이 $0.03{\mu}m$ 정도로 작아 광학적으로 좋은 품질을 갖는 것으로 판명되었다. 국내에서 제작된 비축 포물 거울은 같은 34 mm의 레이저 빔에 대해 고차 파면 수차의 rms 값이 $2.01{\mu}m$나 관측되어 아직 개선이 필요한 것으로 보인다. 또한, 비축 포물 거울의 회전 정렬 오차에 대한 비점수차(astigmatism)의 민감도를 측정한 결과 회전 정렬 오차에 대한 비점수차의 민감도는 $0.371{\mu}m/mrad$인 것으로 관측되었다. 이는 광선 추적 소프트웨어를 사용하여 계산한 값과 거의 같은 양으로 이러한 비점수차의 정렬 민감도 측정은 비축 포물 거울을 정렬하는데 도움을 줄 것으로 생각된다. Wavefront aberrations of a laser beam that was reflected from an off-axis parabolic (OAP) mirror were measured to evaluate the optical performance of the OAP mirror. For a diamond turned OAP mirror, the root-mean-square (rms) value of higher-order aberrations was only $0.03{\mu}m$ for the laser beam size of about 34 mm. The other OAP mirror which was polished at a domestic company had the rms value of higher-order aberrations of $2.07{\mu}m$ for the same beam size. Although the diamond turned OAP mirror was well fabricated to have a small amount of aberrations, the aberrations were induced by the misalignment of the OAP mirror. Especially, 0 degree astigmatism increased with the sensitivity of $0.372{\mu}m/mrad$ when the OAP mirror was tilted in the tangential plane, which agreed well with the calculated results using a commercial ray tracing software.
최성철,이영락,노영철,이종민,고도경,이정훈,김강윤,김창종,이웅상,허명구,Choi, Sung-Chul,Lee, Yeung-Lak,Noh, Young-Chul,Lee, Jong-Min,Ko, Do-Kyeong,Lee, Jung-Hoon,Kim, Kang-Yoon,Kim, Chang-Jong,Lee, Ung-Sang,Heo, Myeong-Koo 한국광학회 2006 한국광학회지 Vol.17 No.2
펨토초 레이저 펄스를 이용하여 Slide glass 위에 코팅된 Al 박막표면에 나노패턴 구조를 생성하였다. 생성된 나노패턴 구조의 공간적 주기는 레이저 강도와 펄스 수에 의존함을 확인하였고, 레이저 강도와 펄스 수를 미세하게 조절함으로써 Al 샘플 표면에 균일한 나노패턴을 형성 시킬 수 있다. 이와 같은 현상은 레이저 입사빔과 샘플 표면에서 산란되는 빛의 광학적 간섭에서 야기 된다. 또한, Al 박막표면 위에 형성된 산화막이 짧은 주기의 나노패턴을 형성하는데 중요한 역할을 수행하는 것을 확인하였다. Femtosecond laser-induced nano-patterning of an Al surface coated on a slide glass is reported in this paper. It was found that the period of the laser-induced nano-patterning was much dependent on the incident laser power and pulse number. Through finely adjusting the laser power and pulse number, uniform nano-patterns could be formed on the Al surface. It is based on the interference of the incident laser beam with some form of a surface scatted electromagnetic wave. It was also found that an Al oxide layer played an important role in forming the nano-patterning on the Al surface.
펨토초 펄스와 광결정 광섬유를 이용한 초 연속스펙트럼의 발생
최형규,김소은,기철식,성재희,유태준,고도경,이종민,Choi, Hyoung-Gye,Kim, So-An,Kee, Chul-Sik,Sung, Jae-Hee,Yu, Tae-Jun,Ko, Do-Kyeong,Lee, Jong-Min 한국광학회 2007 한국광학회지 Vol.18 No.5
광결정 광섬유에서 생성되는 초 연속스펙트럼의 특성을 일반화된 비선형 슈뢰딩거 방정식과 split step 퓨리에 방법을 이용하여 전산모사 하였다. 그 결과를 바탕으로 200 fs 펄스폭을 갖는 Ti:sapphire 레이저와 광결정 광섬유를 이용하여 650nm부터 900nm에 이르는 파장영역에서 ${\pm}4dB$ 이하의 평탄도를 가지는 초 연속스펙트럼을 실험적으로 생성하였다. The characteristics of the supercontinuum generated in photonic crystal fibers were investigated by using the generalized nonlinear $Schr\"{o}dinger$ equation and the split-step Fourier method. Based on the simulated results, we generated the supercontinuum spectrum with the flatness of ${\pm}4dB$ in the wavelength range of 650 to 900 nm by employing a 200-fs pulse of Ti:sapphire laser and a commercial photonic crystal fiber.
손익부(Ik-Bu Sohn),최성철(Sung-Chul Choi),노영철(Young-Chul Noh),고도경(Do-Kyeong Ko),이종민(Jongmin Lee) 한국레이저가공학회 2006 한국레이저가공학회지 Vol.9 No.2
We report experimental results on the high-speed micromachining using a femtosecond laser (800 ㎚ 130 fs, 1㎑) and galvanometer scanner system (Raylase, Germany). Periodic hole drilling of silicon and glass with the scan speed of 1-20 ㎜/s is demonstrated. Finally, we demonstrate the utility of the femtosecond laser application to ITO patterning by using a high-speed femtosecond laser scanner system.