http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
순환유동층 보일러애시를 활용한 폴리머 보수 모르타르의 역학적 특성에 대한 연구
강용학,임귀환,신동철,최영철 한국구조물진단유지관리공학회 2018 한국구조물진단유지관리공학회 논문집 Vol.22 No.5
순환유동층 보일러애시(CFBC ash)는 매년 발생량이 증가하고 있으며, 대부분 활용성이 제한되어 매립, 폐기되고 있는 실정이다. 순환유동층 보일러애시의 화학조성 주성분은 SiO2, CaO, CaSO4로써, 물과 반응하여 시멘트와 유사한 자기수경성을 가지고 있다. 본 연구에서 는 순환유동층 보일러애시의 자기수경성을 활용하여, 폴리머 혼입 보수 모르타르를 개발하기 위한 최적배합을 도출하고자 하였다. 폴리머 혼입 보수 보르타르 개발을 위해 순차적으로 3 Case의 배합을 설정하고 기초 물성을 확인하였다. 그 결과, 순환유동층 보일러애시에 실리카흄 10% 혼입과 폴리머 1.0% 혼입, 팽창재 3.5% 혼입에서 최적의 결과를 얻을 수 있었다. The amount of generated Circulating Fluidized Bed Combustion ash (CFBC ash) is annually increasing, but most CFBC ash has been landfilled and discarded due to the limited utilization. The major chemical compositions of CFBC ash are SiO2, CaO and CaSO4, which could form hydration products by reacting with water as self-cementing property such as cement. The purpose of the this study is to derive the optimal mix proportions to improve polymer-modified mortar with the use of CFBC ash which has the self-cementing property. In order to develop polymer-modified mortar, three mix proportions were determined, and fundamental properties for the mixtures were obtained. As a result, the optimal mixture containing 10 percent of silica fume, 1.0 percent of polymer and 3.5 percent of expansive additives were proposed in this study.
내려가는 방향에서 본 단차의 시인성에 미치는 관찰 높이 및 시각 조건의 영향
강용학,Kang, Yong-Hak 인천대학교 도시과학연구원 2020 도시과학 Vol.9 No.1
Steps are very common features in our living environment. Unfortunately, the occurrence of accidents on steps is thus inevitable. A failed visibility to recognize a step remains the most common attribute in these accidents. In this research, sensory scales of step visibility were created in order to examine the effects of two factors on step visibility in sensory testing methods; observation height from floor and eye condition while viewing a step from the descending direction. Results of sensory tests revealed strong influence of eye condition on step visibility. Influence of visual characteristics of each step was also examined and clarified.
순환유동층 보일러애시를 활용한 비소성 결합재로써의 활용 가능성 검토
강용학,임귀환,김상준,최영철 한국구조물진단유지관리공학회 2018 한국구조물진단유지관리공학회 논문집 Vol.22 No.5
최근 화력발전소에서는 순환유동층 연소방식의 발전소가 증가하는 추세이다. 순환유동층 보일러애시는 탈황 효과를 위해 석회석을 첨가함에 따라 애시 중에 포함되는 CaO, SO3성분이 증가하여 일반적인 플라이애시 보다 free-CaO 함량이 높다. 또한 순환유동층 보일러애시는 기존의 플라이애시와 다르게 자기수경성 특성과, 높은 free-CaO함량에 의해 물과 만나면 높은 반응성을 갖는다. 본 연구는 순환유동층 보일러애시의 자기수경성 특성을 이용하여, 시멘트를 대체할 수 있는 비소성 결합재로써 활용 가능성에 대해 분석하였다. 순환유동층 보일러 애시의 함량에 따른 역학적 및 수화특성에 대해 검토하였다. 또한 석고의 종류 및 함유량에 따른 순환유동층 보일러애시 활용 비소성 결합재에 대 한 압축강도 및 미세구조에 미치는 영향을 분석하였다. Recently, the production of circulating fluidized bed combustion ash has been increased in thermal power plants. The addition of limestone for the desulfurizing effect of circulating fluidized bed boiler ash increases the content of CaO and SO3 contained in ash, which is higher than the free fly ash in general fly ash. Unlike conventional fly ash, the circulating fluidized bed combustion ash has a high reactivity when it comes into contact with water due to its hydraulic properties and high free-CaO content. The aim of this study is to investigate the possibility of non-sintered binder by using self-cementing properties of circulating fluidized bed combustion ash. The mechanical and hydration characteristics were investigated according to the content of CFBC ash. In addition, the effects of gymsum type and content on the compressive strength and micro-structure of non-sintered binder pastes.
고강도 고유동 콘크리트를 이용한 콘크리트충전강관(CFT)구조의 충전성에 관한 공법 연구
강용학,정근호,임남기,이영도,정재영,정상진,Kang, Yong-Hak,Jung, Keun-Ho,Lim, Nam-Ki,Lee, Young-Do,Jung, Jae-Young,Jung, Sang-Jin 한국건축시공학회 2002 한국건축시공학회지 Vol.2 No.1
In this study, there are kind of property experiments like fluidity, compressive strength, bleeding measurement, concrete sink for CFT use high fluidity concrete. The property difference between before transmit and after transmit concrete in the mock up test with ready mixed concrete equipment is examined. The variable factors in mock up are diaphragm existence and nonexistence, diaphragm placing hole sizes. To investing the concrete Property under diaphragm, concrete packing ability, hydration heat, core specimen strength tests are performed.