http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김재호,정승명,김성윤 한국통신학회 2020 정보와 통신 Vol.37 No.5
최근 도시의 구성요소들이 디지털화 되고 다양한 도시 인프라가 지능화 되며 그 효율성이 점점 높아지고 도시 자체가 스마트화 되면서 그동안 해결이 어려웠던 도시문제들에 대한 해결책이 제시되고있다. 또한 시민들의 참여를 통해서 도시가 시민 중심으로 변화되고 시민들의 편의 기능이 점점 향상되어가고 있다. 이러한 도시의 변화의 중심에는 도시의 디지털화와 지능화를 가능하게하는 ICT 기술이 있다. 본 논문은 도시의 디지털 혁신에 대해서 살펴보고 디지털 혁신의 핵심이 되는 스마트시티 데이터 허브에 대한 연구내용을 소개하고 그 활용사례를 서술한다. 이를 통하여 도시의 데이터 흐름과 활용을 어떻게 효과적으로 제공할 지에 대하여 논하고자 한다.
oneM2M 플랫폼기반 IoT 데이터 지능형 처리 방안
김재호,김민지,장효창,김유진 한국통신학회 2021 정보와 통신 Vol.38 No.10
최근 사물인터넷은 새로운 시대를 맞이하고 있다. 사물에게 연결성을 제공하고 센서로부터 데이터 수집, 분석, 판단하는 지능형 사물인터넷 시대를 지나 사물들이 현장에서 스스로 판단하고 대응하는 자율형 사물인터넷 시대가 열리고 있다. 자율형 사물인터넷은 사물의 연결성과 지능을 기반으로 사물들이 주변 사물과 상호 작용하며 공간, 상황에 대한 정보를 스스로 판단하고 협력, 예측 운영을 통한 자율형 서비스 제공한다. 본 논문에서 지능형에서 자율형 IoT로 사물인터넷이 진화하기위해서 필요한 실시간 지능을 oneM2M 표준 플랫폼 기반으로 효과적으로 지원하기위하여 관련된 표준화 및 연구 동향에 대하여 살펴본다.
김재호,최성찬,성낙명,윤재석 한국통신학회 2016 정보와 통신 Vol.33 No.5
최근 구글, 애플, 아마존 등의 글로벌 기업들이 사물인터넷 서비스를 위한 개방형 플랫폼 제공 및 관련 생태계 확보에 나선가운데, 국제표준단체의 표준화 추진, 기업들간의 협력을 통한 얼라이언스 표준 등 다양한 형태의 표준 기술 개발이 진행되고 있다. 표준기술의 다양화는 사물인터넷의 다양한 서비스 분야에 대한 표준화가 진행되는 긍정적인 측면과 더불어 표준기술간의 연동이 필연적으로 요구된다. 본고에서는 최근 구현 가능한 수준으로 개발된 사물인터넷 관련 대표적인 표준기술에 대하여 간략히 살펴보고, oneM2M에서 표준화가 진행중인 이들 표준간의 연동 표준 기술에 대해서 소개한다. 또한 이러한 표준기술을 활용하여 구현된 사례를 보임으로서 표준간에 실질적인 연동을 통한 서비스 제공의 가능성을 보인다.
측정방법에 따른 흡기포트 분사식 다공 가솔린인젝터의 분무각 비교
김재호,노수영,임정현,문병수 한국액체미립화학회 2000 한국액체미립화학회지 Vol.5 No.3
The main parameter commonly used to evaluate spray distribution is spray angle. Spray angle is important because it influences the axial and radial distribution of the fuel. Spray angles were measured and compared for the two non-air assisted injectors such as 2hole-2stream, 4hole-1stream injectors used for port fuel injection gasoline engines with n-heptane as a fuel by three different measuring techniques, i.e. digital image processing, shadowgraphy, and spray patternator, respectively. Fuel was injected with the injection pressures of 0.2-0.35 MPa into the room temperature and atmospheric pressure environment. In digital image processing approach, the selection of the transmittance level is critical to obtain the edge of splay and hence to measure the spray angle. From the measurement results by the shadowgraphy technique, it is clear that the spray angle is varied during the spray injection period. The measurement results from spray patternator show that the different spray angles exist in different region. Spray angle increases with the increase in the injection pressure. it is suggested that the spray angle and stream separated angle should be specified when spray is characterized for 2hole-2stream injector, because spray angle is much different though stream separated angle is same. It was also considerably affected by the measurement techniques introduced in this experimental work. However, the optimal axial distance for measuring the spray angle seems to be at least 60-80 mm from the injector tip for two non-air assisted injectors.