Electrical and mechanical properties of diluted magnetic semiconductor Zn1-xMnxS nanocrystalline films

D. Sreekantha Reddy,강병원,유성초,Y. Dwarakanadha Reddy,S.K. Sharma,K.R. Gunasekhar,K.N. Rao,P. Sreedhara Reddy 한국물리학회 2009 Current Applied Physics Vol.9 No.3

Nanostructured Zn1-xMnxS films (0 ≼ x ≼ 0.25) were deposited on glass substrates by simple resistive thermal evaporation technique. All the films were deposited at 300 K in a vacuum of 2 × 10-6 m bar. All the films temperature dependence of resistivity revealed semiconducting behaviour of the samples. Hot probe test revealed that all the samples exhibited n-type conductivity. The nanohardness of the films ranges from 4.7 to 9.9 GPa, Young’s modulus value ranging 69.7–94.2 GPa.

Electrical and mechanical properties of diluted magnetic semiconductor Zn_1-xMn_xS nanocrystalline films

Sreekantha Reddy, D.,Kang, B.,Yu, S.C.,Dwarakanadha Reddy, Y.,Sharma, S.K.,Gunasekhar, K.R.,Rao, K.N.,Sreedhara Reddy, P. Elsevier 2009 Current Applied Physics Vol.9 No.2

Nanostructured Zn<SUB>1-x</SUB>Mn<SUB>x</SUB>S films (0=<x=<0.25) were deposited on glass substrates by simple resistive thermal evaporation technique. All the films were deposited at 300K in a vacuum of 2x10<SUP>-6</SUP>m bar. All the films temperature dependence of resistivity revealed semiconducting behaviour of the samples. Hot probe test revealed that all the samples exhibited n-type conductivity. The nanohardness of the films ranges from 4.7 to 9.9GPa, Young's modulus value ranging 69.7-94.2GPa.

Design, Synthesis and Biological Evaluation of Novel Analogs of Bortezomib

Rao, R. Janaki Rama,Rao, A.K.S. Bhujanga,Swapna, K.,Rani, B. Baby,Kumar, S. Prasanna,Awantika, S.,Murthy, Y.L.N. Korean Chemical Society 2011 대한화학회지 Vol.55 No.5

Novel analogs of bortezomib were designed, synthesized and in vitro biological evaluation was carried out using human tumor cell lines A549 and PC3. Docking studies of these analogs of bortezomib was discussed. According to biological investigations, the inhibitors 4, 6, and 8 were found to be more potent than reference drug candidate bortezomib. A549 cell line showed significant sensitivity towards 4, 6, and 8 with $IC_{50}$ values 14.03, 18.5, and 12.4 nM, respectively, and PC3 cell line showed IC50 values 26.1, 37.0, and 21.2 nM, respectively. The $IC_{50}$ values of bortezomib in these cell lines are 27.3 nM and 42.0 nM.

Laccase- and Peroxidase-Free Tyrosinase Production by Isolated Microbial Strain

( Sambasiva Rao K. R. S. ),( N. K. Tripathy ),( Y. Mahalaxmi ),( R. S. Prakasham ) 한국미생물 · 생명공학회 2012 Journal of microbiology and biotechnology Vol.22 No.2

Laccase- and peroxidase-free tyrosinase has commercial importance in the production of L-3, 4-dihydroxyphenylalanine (L-DOPA), which is mainly used in the treatment of Parkinson`s disease. In the present study, isolation of an actinomycetes microbial strain capable of producing only tyrosinase is reported. Among all soil isolates, three individual colonies revealed black color around the colony in the presence of tyrosine. Further screening for laccase and peroxidase activities using syringaldazine denoted that one of the isolates, designated as RSP-T1, is laccase and peroxidase negative and produces only tyrosinase. The microbe was authenticated as Streptomyces antibioticus based on 16S ribotyping. Effective growth of this isolate was noticed with the use of medium (pH 5.5) containing casein acid hydrolysate (10.0 g/l), K2HPO4 (5.0 g/l), MgSO4 (0.25 g/l), L-tyrosine (1.0 g/l), and agar (15 g/l). The scanning electron micrograph depicted that the microbe is highly branched and filamentous in nature. The enzyme production was positively regulated in the presence of copper sulfate. The impact of different fermentation parameters on tyrosinase production depicted that the maximized enzyme titer values were observed when this isolate was grown at 6.5 pH and at 30oC temperature under agitated conditions (220 rpm). Among all the studied physiological parameters, agitation played a significant role on tyrosinase production. Upon optimization of the parameters, the yield of tyrosinase was improved more than 100% compared with the initial yield.

Electron-Electron Interactions based Metal-Insulator Transition in Ga Doped ZnO Thin Films

R V Muniswami Naidu,A Subrahmanyam,A Verger,M K Jain,S V N Bhaskara Rao,S N Jha,D M Phase 대한금속·재료학회 2012 ELECTRONIC MATERIALS LETTERS Vol.8 No.4

We report on the charge carrier transport mechanisms of undoped and Ga doped (2 wt. % and 4 wt. %)ZnO thin films grown by pulsed dc magnetron sputtering technique. Temperature dependent resistivity measurements showed typical semiconducting behaviour for undoped ZnO thin films where as Ga doped ZnO thin films showed metallic nature at higher temperatures and insulating nature with a metal to insulator transition at lower temperatures. The observed transition temperatures are 91 K and 140 K for 2 wt. % and 4 wt. %Ga doped ZnO films respectively. The observed metal insulator transition is attributed to the electron-electron interactions at low temperatures. The variations in the transition temperatures are explained based on the disorderness induced in the system due to the doping effect. ZnO doped with 4 wt. % Ga showed the lowest resistivity of 5.7 × 10−4Ω cm with a carrier concentration of 1.2 × 1021/cm3. Undoped and doped ZnO thin films are about 90% transparent in the visible region. Blue shift is observed in the absorption edge with the effect of doping and it is explained based on B-M shift. The Fermi level measured from valance band spectroscopy showed a shift of +0.6 eV for 2 wt. % Ga doped ZnO thin film and +0.7 eV for 4 wt. %Ga doped ZnO thin film compared to the Fermi edge of undoped ZnO thin films. This ascertains the movement of Fermi level in to the conduction band with the effect of doping.

Comparative study on damage identification from Iso-Eigen-Value-Change contours and smeared damage model

N. Lakshmanan,B.K. Raghuprasad,N. Gopalakrishnan,R. Sreekala,G.V. Rama Rao 국제구조공학회 2010 Structural Engineering and Mechanics, An Int'l Jou Vol.35 No.6

The paper proposes two methodologies for damage identification from measured natural frequencies of a contiguously damaged reinforced concrete beam, idealised with distributed damage model. The first method identifies damage from Iso-Eigen-Value-Change contours, plotted between pairs of different frequencies. The performance of the method is checked for a wide variation of damage positions and extents. The method is also extended to a discrete structure in the form of a five-storied shear building and the simplicity of the method is demonstrated. The second method is through smeared damage model, where the damage is assumed constant for different segments of the beam and the lengths and centres of these segments are the known inputs. First-order perturbation method is used to derive the relevant expressions. Both these methods are based on distributed damage models and have been checked with experimental program on simply supported reinforced concrete beams, subjected to different stages of symmetric and un-symmetric damages. The results of the experiments are encouraging and show that both the methods can be adopted together in a damage identification scenario.

Dietary Calcium and Non-phytin Phosphorus Interaction on Growth, Bone Mineralization and Mineral Retention in Broiler Starter Chicks

Rao, S.V. Rama,Raju, M.V.L.N.,Reddy, M.R.,Pavani, P.,Sunder, G. Shyam,Sharma, R.P. Asian Australasian Association of Animal Productio 2003 Animal Bioscience Vol.16 No.5

An experiment was conducted to study the requirement of calcium (Ca) and non-phytin phosphorus (NPP) in commercial broilers during starter phase. Seven hundred and twenty day-old Vencob male broiler chicks were randomly distributed into 144 stainless steel battery brooders, 5 birds in each. Four levels each of Ca (6, 7, 8, and 9 g/kg) and NPP (3, 3.5, 4, and 4.5 g/kg diet) were fed in a factorial design in a corn-soya basal diet. Levels of dicalcium phosphate and oyster shell grit were adjusted to obtain the desired levels of Ca and NPP. Each diet was fed ad libidum to chicks in 9 battery brooders from one d to 21 d of age. Body weight gain and feed intake were depressed (p<0.01) by increasing the dietary Ca level (8 and 9 g/kg) at lower levels of NPP (3 and 3.5 g/kg diet). The growth depression observed at lower NPP level was alleviated by reducing the Ca content to 6 g/kg diet. The tibia ash content and tibia breaking strength increased with increase in both Ca (>6 g/kg) and NPP (>3 g/kg) levels. The leg abnormality score decreased (p<0.01) with increase in NPP content in the diet at all levels of Ca tested. The serum Ca and inorganic P levels were increased with increase in the level of the respective mineral in the diet, but the serum concentration of Ca and P were inversely related to the level of NPP and Ca, respectively /kg diet. In general, the excretion of macro minerals (Ca, and P), and micro minerals {zinc (Zn), manganese (Mn), iron (Fe), and copper (Cu)} was significantly lower at lower levels of Ca and NPP tested (6 and 3 g/kg diet, respectively). The mineral excretion increased with increase in dietary Ca and NPP levels, more conspicuously at the disproportionate ratio of these minerals (>2:1, Ca and NPP). Similarly, the retention of Zn, Mn, and Fe in liver was significantly higher (p<0.01) at lower levels of Ca and NPP tested. Results from this study indicate that the commercial broilers do not require more than 3 g NPP and 6g Ca/kg diet during starter phase (up to 21 d of age) for optimum weight gain, feed efficiency and utilization of Ca, P, Zn, Mn, Fe and Cu. However, the requirements of these minerals for optimum bone mineralization were higher than the levels suggested above.

Evaluation and Identification of Promising Bivoltine Hybrids of Silk-worm, Bombyx mori L., for Tropics

Rao, P.Sudhakara,Singh, Ravindra,Kalpana, G.V.,Naik, V.Nishitha,Basavaraja, H.K.,Swamy, G.N.Rama,Datta, R.K. Korean Society of Sericultural Science 2001 International Journal of Industrial Entomology Vol.3 No.1

Ten newly evolved bivoltine hybrids of silkworm (Bombyx mori L) were evaluated with control hybrid KA${\pm}$NB4D2 during three seasons of a year for their seasonal performance. Analysis of variance and other statistical methods were employed and the performance was observed in respect of 10 quantitative traits. The results showed significant genotype${\pm}$environment interaction with respect to four quantitative characters viz. fecundity, yield/10,000 larvae, filament length and raw silk (%). Environmental effects were significant for nine characters out of ten characters evaluated. A 105${\pm}$J2 and B${\pm}$NB4D2 were considered as highly adaptable hybrids to local conditions with high mean for maximum characters studied and found suitable to rear in all seasons.

Comparative study on damage identification from Iso-Eigen-Value-Change contours and smeared damage model

Lakshmanan, N.,Raghuprasad, B.K.,Gopalakrishnan, N.,Sreekala, R.,Rama Rao, G.V. Techno-Press 2010 Structural Engineering and Mechanics, An Int'l Jou Vol.35 No.6

The paper proposes two methodologies for damage identification from measured natural frequencies of a contiguously damaged reinforced concrete beam, idealised with distributed damage model. The first method identifies damage from Iso-Eigen-Value-Change contours, plotted between pairs of different frequencies. The performance of the method is checked for a wide variation of damage positions and extents. The method is also extended to a discrete structure in the form of a five-storied shear building and the simplicity of the method is demonstrated. The second method is through smeared damage model, where the damage is assumed constant for different segments of the beam and the lengths and centres of these segments are the known inputs. First-order perturbation method is used to derive the relevant expressions. Both these methods are based on distributed damage models and have been checked with experimental program on simply supported reinforced concrete beams, subjected to different stages of symmetric and un-symmetric damages. The results of the experiments are encouraging and show that both the methods can be adopted together in a damage identification scenario.

Genotype by Dietary Lysine Interaction for Growth and Response to Sheep Red Blood Cells and Escherichia coli Inoculation in Commercial Broiler Chicks

Praharaj, N.K.,Reddy, M.R.,Panda, A.K.,Rama Rao, S.V.,Sharma, R.P. Asian Australasian Association of Animal Productio 2002 Animal Bioscience Vol.15 No.8

An experiment was conducted to assess the interaction between genotypes and dietary lysine content in commercial broiler chicks by measuring growth, and response to sheep red blood cells (SRBC) and Escherichia coli (E.coli) inoculation. Female chicks from four genotypes (A=Anak 2000; B=Hubbard; C=Cobb and D=Synthetic broiler) were fed four levels of lysine in diet from d old till the end of experiment. The lysine content of the diet was 9.61, 10.51, 11.41 and 12.31 g/kg. Body weights at 0, 14, 28 and 42 d of age and pen-wise feed intake till 14, 28 and 42 d of age were recorded. Production of antibody against SRBC and resistance to E.coli were measured at 5 d of post inoculation (PI) at 43 d of age. Also, response to phytohemaglutinin-P (PHA-P) was measured at 12 and 24 h of PI at 48 d of age. Genotype by dietary lysine interaction was significant for body weights at 14 and 28 d of age, but not at 42 d of age. Genotype by dietary lysine interaction was not significant for feed efficiency, for antibody titers against SRBC, and for air sac lesion score, relative bodyweight change, and relative weights of bursa and spleen in response to E.coli inoculation. However, a significant interaction was observed between the levels of lysine and dosage of SRBC for antibody titers. There was significant genotype by dietary lysine interaction for cutaneous basophilic hypersensitivity (CBH) response to PHA-P at 12 and 24 h of PI. It may be concluded that to obtain optimum body weight and immunity in commercial broilers the dietary lysine requirement may be recommended specific to the genotype.