http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Gang Chen,Yu Jin,Jing Wang,Cheng Zhang,Qiang Chen,Hongming Zhang,Xingjian Zhao,Zhiyong Li,Changhai Xie,Zhiming Du 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.9
Isothermal compression tests were carried out to study the hot deformation behavior of T2 copper under various conditions. The deformation parameters, such as temperature and strain rate, have strong influence on flow stress and microstructureevolution of the alloy. A unified dislocation density-based model considering dynamic recovery and recrystallization wasestablished. And material parameters of the developed model were optimized by genetic algorithm. Comparisons betweenthe experimental and model data demonstrates that the developed model can precisely describe the flow behavior at quitewide range of deformation conditions. Meanwhile, the designed iterative procedure allows the model to be applied in timevariantdeformation conditions. Processing map and microstructure examination were constructed to optimize the processingwindow of the studied alloy. According to the processing maps, flow instability mainly appeared at low temperatures of500–650 °C and strain rates higher than 0.1 s−1. The optimum deformation parameters of T2 copper was concluded as thetemperature range of 700–800 °C and the strain rate of 0.1–1 s−1.
Inhibition of Microcystis aeruginosa by the Extracellular Substances from an Aeromonas sp
( Yu Mei Liu ),( Ming Jun Chen ),( Meng Hui Wang1 ),( Rui Bao Jia ),( Li Li ) 한국미생물 · 생명공학회 2013 Journal of microbiology and biotechnology Vol.23 No.9
Growth of Microcystis aeruginosa could be inhibited significantly within 24 h by the extracellular substances prepared from Aeromonas sp. strain FM. During the treatment, the concentration of extracellular soluble carbohydrates increased significantly in algal culture. Morphological and ultrastructural changes in M. aeruginosa cells, including breakage of the cell surface, secretion of mucilage, and intracellular disorganization of thylakoids, were observed. HPLC-MS analysis showed that the extracellular substances of Aeromonas sp. strain FM were a mixture of free amino acids, tripeptides, and clavulanate. Among these, the algaelysis effects of lysine and clavulanate were confirmed.
Zheng Tan,Wei-hui Zhong,Bao Meng,Shi-chao Duan,Hong-chen Wang3,Xing-You Yao,Yu-hui Zheng 국제구조공학회 2023 Steel and Composite Structures, An International J Vol.47 No.2
The bearing capacities resisted by the two-bay beams of multi-story planar frames with unequal spans under column removal scenarios differ considerably owing to the asymmetric stress on the left and right beams connected to the failed column and cause the potential for beams with larger span-to-depth ratios to be unable to exert effectively, which is disadvantageous for resisting the vertical load in unequal-span frame structures. To address this problem, the structural measure of adding braces to the weak bays of multi-story unequal-span frames was proposed, with the objective of achieving a coordinated stress state in two-bay beams with unequal spans, thereby improving the collapse resistance of unequal-span frame structures. Before conducting the numerical simulation, the modeling methods were verified by previous experimental results of two multi-story planar frames with and without steel braces. Thereafter, the effects of the tensile and compressive braces on the collapse behavior of the frame structures were elucidated. Then, based on the mechanical action laws of the braces throughout the collapse process, a detailed design method for improving the collapse resistance of unequal-span frame structures was proposed. Finally, the proposed design method was verified by using sufficient example models, and the results demonstrated that the design method has good application prospects and high practical value.
A novel flexible micro-ratchet/ZnO nano-rods surface with rapid recovery icephobic performance
Wang, Manxiang,Yu, Wenbo,Zhang, Yupei,Woo, Jae-Young,Chen, Yu,Wang, Bo,Yun, Yanbin,Liu, Guicheng,Lee, Joong Kee,Wang, Lei Elsevier 2018 Journal of industrial and engineering chemistry Vol.62 No.-
<P><B>Abstract</B></P> <P>In this communication, we present a significant method to fabricate a robust icephobic surface on a flexible polymer substrate. The flexible functional surface is obtained by integrating both soft-lithography and crystal growth methods. Modified by the materials with low surface free energy, the composite surface exhibits a robust superhydrophobicity at not only room temperature but also low temperature. After freezing test, the surface can recover to its original function quickly, which has achieved the level for industrial application, and also performed significant role for enhancing the icephobic theories.</P> <P><B>Highlights</B></P> <P> <UL> <LI> ZnO nano-rods are uniformly planted on the flexible PDMS surface. </LI> <LI> Fabrication of the surface integrates both crystal growth and physical vapor deposition methods. </LI> <LI> The superhydrophobic surface successfully realizes fast-recovery from freezing state. </LI> <LI> In freezing process, the nanorods can hardly cracked due to the flexible basement. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>The liquid droplet can recover to sphere state (Cassie's state) after melting from low temperature (for example, 20°C). ▪</P> <P>[DISPLAY OMISSION]</P>
Graphitization of graphene oxide films under pressure
Chen, Xianjue,Deng, Xiaomei,Kim, Na Yeon,Wang, Yu,Huang, Yuan,Peng, Li,Huang, Ming,Zhang, Xu,Chen, Xiong,Luo, Da,Wang, Bin,Wu, Xiaozhong,Ma, Yufei,Lee, Zonghoon,Ruoff, Rodney S. Elsevier 2018 Carbon Vol.132 No.-
<P><B>Abstract</B></P> <P>Lightweight, flexible graphite foils that are chemically inert, high-temperature resistant, and highly electrically and thermally conductive can be used as component materials in numerous applications. “Graphenic” foils can be prepared by thermally transforming graphene oxide films. For this transformation, it is desirable to maintain a densely packed film structure at high heating rates as well as to lower the graphitizing temperatures. In this work, we discuss the pressure-assisted thermal decomposition of graphene oxide films by hot pressing at different temperatures (<I>i.e.</I>, 300 °C, 1000 °C, or 2000 °C). The films pressed at 1000 °C or 2000 °C were subsequently heated at 2750 °C to achieve a higher degree of graphitization. The combination of heating and pressing promotes the simultaneous thermal decomposition and graphitic transformation of G-O films. Films pressed at 2000 °C as well as films further graphitized at 2750 °C show high chemical purity, uniformity, and retain their flexibility. For films pressed at 2000 °C and then further heated at 2750 °C, the mechanical performances outperform the reported values of the “graphite” foils prepared by calendering exfoliated graphite flakes; the electrical conductivity is ∼3.1 × 10<SUP>5</SUP> S/m and the in-plane thermal conductivity is ∼1.2 × 10<SUP>3</SUP> W/(m·K).</P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>
Wang Laiyou,Guo Shuxian,Zeng Bo,Wang Shanshan,Chen Yan,Cheng Shuang,Liu Bingbing,Wang Chunyan,Wang Yu,Meng Qingshan 한국균학회 2022 Mycobiology Vol.50 No.1
The identification of oleaginous yeast species capable of simultaneously utilizing xylose and glucose as substrates to generate value-added biological products is an area of key eco- nomic interest. We have previously demonstrated that the Cutaneotrichosporon dermatis NICC30027 yeast strain is capable of simultaneously assimilating both xylose and glucose, resulting in considerable lipid accumulation. However, as no high-quality genome sequenc- ing data or associated annotations for this strain are available at present, it remains chal- lenging to study the metabolic mechanisms underlying this phenotype. Herein, we report a 39,305,439 bp draft genome assembly for C. dermatis NICC30027 comprised of 37 scaffolds, with 60.15% GC content. Within this genome, we identified 524 tRNAs, 142 sRNAs, 53 miRNAs, 28 snRNAs, and eight rRNA clusters. Moreover, repeat sequences totaling 1,032,129 bp in length were identified (2.63% of the genome), as were 14,238 unigenes that were 1,789.35 bp in length on average (64.82% of the genome). The NCBI non-redundant protein sequences (NR) database was employed to successfully annotate 11,795 of these unigenes, while 3,621 and 11,902 were annotated with the Swiss-Prot and TrEMBL databases, respectively. Unigenes were additionally subjected to pathway enrichment analyses using the Gene Ontology (GO), Kyoto Encyclopedia of Genes and Genomes (KEGG), Cluster of Orthologous Groups of proteins (COG), Clusters of orthologous groups for eukaryotic com- plete genomes (KOG), and Non-supervised Orthologous Groups (eggNOG) databases. Together, these results provide a foundation for future studies aimed at clarifying the mech- anistic basis for the ability of C. dermatis NICC30027 to simultaneously utilize glucose and xylose to synthesize lipids.
Wang, Fu-yu,Wang, Peng,Yang, Chen-xuan,Zhou, Tao,Jiang, Jin-li,Meng, Xiang-hui The Korean Neurosurgical Society 2020 Journal of Korean neurosurgical society Vol.63 No.4
Objective : An important factor during pituitary adenoma surgery is to preserve pituitary stalk (PS) as this plays a role in reduction of the risk of postoperative diabetes insipidus. The hypothalamic-hypophyseal tract (HHT) projects through the PS to the posterior pituitary gland. To reconstruct white matter fiber pathways, methods like diffusion tensor imaging (DTI) tractography have been widely used. In this report we attempted to predict the position of PS using DTI tractography and to assess its intraoperative correlation during surgery of pituitary adenomas. Methods : DTI tractography was used to tract the HHT in nine patients before craniotomy for pituitary adenomas. The DTI location of the HHT was compared with the PS position identified at the time of surgery. DTI fiber tracking was carried out in nine patients prior to the planned craniotomy for pituitary adenomas. In one patient, the PS could not be identified during the surgery. In the other eight patients, a comparison was made between the location of the HHT identified by DTI and the position of the PS visualized at the time of surgery. Results : The position of the HHT identified by DTI showed consistency with the intraoperative position of the PS in seven patients (88.9% concordance). Conclusion : This study shows that DTI can identify the position of the HHT and thus the position of the PS with a high degree of reliability.
Yu Wang,Feng Li,Ye Wang,Qiang Chen,Xue Wen Li,Wen Bin Fang 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.4
In this study, interactive alternate forward extrusion (AFE) experiments with varying number of extrusion passes of AZ31magnesium alloy were carried out. The evolution of microstructure, and texture and their effects on the mechanical propertieswere studied. The results show that with the increase of loading passes, the grains are significantly refined, and thedynamic recrystallisation (DRX) structure is uniformly distributed in the product, which is the main reason for the increasein microhardness, compressive strength and failure strain. Further, slip and twinning induced DRX behaviour are consideredto be the main deformation methods in the early stage of deformation. Whereas continuous DRX is considered to be the maindeformation methods for the change in grain morphology in the later stage. During the extrusion process, the deflection angleof the base pole decreases. Finally, the fibre texture is formed; the texture strength is significantly reduced because of theeffect of recrystallisation. The AZ31 magnesium alloy interactive AFE process is discussed with respect to the technologicalexperiment and the microstructure deformation, thus providing a vital scientific basis for further application.