VLCC기항에 따른 인천VTS 안전대책

이성용,장재영,최자윤,이창우,박현지 한국항해항만학회 2014 한국항해항만학회 학술대회논문집 Vol.2014 No.춘계

VLCC에 의한 SK에너지 울산CLX와 인천CLX의 일원화된 효율적 원유 수급체계에 따른 물류비용의 절감, 이에 따른 국가 산업 경쟁력확보 및 항만경쟁력 강화를 위한 고도화 사업의 일환으로 고부가가치 선박인 VLCC가 인천항에 처녀입항하게 되었다. 이로 인한 해상교통관제센터(VTS)의 안전대책이 요구되어 비교적 통항량이 많고 항로길이가 긴 인천항의 VLCC운항 계획에 따른 해상교통 혼잡도 등, 다각적인 통항 안전성 및 VLCC 입출항에 따른 타 통항선과의 항행안전 관계등을 점검하여, 계속적인 VLCC 입항에 따른 항행 위험성을 파악하고, 앞으로의 인천항만 안전을 위한 통항안전관리대책을 모색하고자 한다.

신경망기법을 활용한 선박 가치평가 모델 개발

김동균,최정석 해양환경안전학회 2021 해양환경안전학회지 Vol.27 No.1

본 연구의 목적은 Neural Network Regression 모델을 활용하여 선박의 가치평가 모델을 개발하는 것이다. 가치평가의 대상은 중고 VLCC선이며, 선행연구를 통해 선박의 가치 변화를 유발하는 주요 요인들을 선별하여 변수를 설정하고, 2000년 1월부터 2020년 8 월까지의 해당 데이터를 확보하였다. 변수의 안정성을 판단하기 위해 다중 공선성 검사를 수행하여 최종적으로 6개의 독립변수와 1개의 종속변수를 선정하고 연구 구조를 설계하였다. 이를 바탕으로 Linear Regression, Neural Network Regression, Random Forest Algorithm을 활용하여 총 9개의 시뮬레이션 모델을 설계하였다. 또한 각 모델간의 비교검증을 통해 평가결과의 정확성을 제고시켰다. 평가 결과, VLCC실제값과의 비교를 통해 2층으로 구성된 Hidden Layer의 Neural Network Regression 모델이 가장 정확도가 높은 것으로 나타났다. 본 연구의 시사점은 첫째, 기존 정형화된 평가기법에서 벗어나 기계학습기반 모델을 선박가치평가에 적용하였다는 점이다. 둘째, 해운시 장 변화요인을 동태적 관점에서 분석하고 예측함으로써 연구결과의 객관성을 제고시켰다고 할 수 있다. The purpose of this study is to develop the ship valuation model by utilizing the neural network model. The target of the valuation was secondhand VLCC. The variables were set as major factors inducing changes in the value of ship through prior research, and the corresponding data were collected on a monthly basis from January 2000 to August 2020. To determine the stability of subsequent variables, a multi-collinearity test was carried out and finally the research structure was designed by selecting six independent variables and one dependent variable. Based on this structure, a total of nine simulation models were designed using linear regression, neural network regression, and random forest algorithm. In addition, the accuracy of the evaluation results are improved through comparative verification between each model. As a result of the evaluation, it was found that the most accurate when the neural network regression model, which consist of a hidden layer composed of two layers, was simulated through comparison with actual VLCC values. The possible implications of this study first, creative research in terms of applying neural network model to ship valuation; this deviates from the existing formalized evaluation techniques. Second, the objectivity of research results was enhanced from a dynamic perspective by analyzing and predicting the factors of changes in the shipping. market.

VLCC의 인천항 안전 입출항을 위한 선박조종 시뮬레이션을 통한 통항안전성 평가

김세원,최윤정,이윤석 한국항해항만학회 2014 한국항해항만학회 학술대회논문집 Vol.2014 No.춘계

인천항은 지리 위치적인 특성으로 인하여 조류가 강하고, 가항수역이 협소할 뿐만 아니라 굴곡이 심하여 지금까지 인천항 입출항 최대크기의 선박은 7만 DWT급의 만재상태의 파나막스 정도만 가능했으나, 앞으로는 반재(Half loading)한 상태의 VLCC가 입출항할 것으로 판단된다. 따라서 인천항 입항항로인 동수도 항로 주변여건을 다각도로 검토하고, VLCC의 조종특성을 감안한 입출항 안정성을 선박조종 시뮬레이션을 통하여 평가하였다. The port of Incheon is very famous of strong current and many curved fairway with exist of many islands around the fairway. Therefore the max size of calling vessel is restricted in 50K DWT with 13.0m draft. However in the near future, half cargo loaded VLCC will call SK energy Dolphin berth for discharging of crude oil. In this connection, this study will evaluate the safety of passing for Dongsudo-fairway by using the shiphandling simulation data that was produced by familiarized training & education for Incheon port pilots about VLCC's maneuvering characters and the fairway of Incheon port.

Experimental Study on Added Resistance of VLCC for Ship's Operating Condition in Waves

Lee, Sang-Min The Korean Society of Marine Environment and safet 2015 海洋環境安全學會誌 Vol.21 No.3

In this study, experiments were performed using a model of a very large crude oil carrier (VLCC), which is a typical blunt ship, in a wave-making towing tank. The aim of the experiments was to determine the effect of added resistance in waves on the various operating conditions of a VLCC. An analysis of the results was conducted to determine the characteristics of resistance performance in waves. In addition, the characteristics of added resistance on a tanker were analyzed under irregular waves based upon the above result. The experimental results showed that added resistance was the highest around ${\lambda}/L=1.0$, and the added resistance increased with the increase of the ship speed. Furthermore, under even keel conditions, the added resistance was higher than that under the trim changes, and the smallest added resistance was measured at the trim by the stern. Based on the experimental results, this study proposes effective operating conditions by analyzing the characteristics of the mean added resistance and the expected extreme response in irregular waves.

Experimental Study on Added Resistance of VLCC for Ship’s Operating Condition in Waves

Sang-Min Lee 해양환경안전학회 2015 海洋環境安全學會誌 Vol.21 No.3

In this study, experiments were performed using a model of a very large crude oil carrier (VLCC), which is a typical blunt ship, in a wave-making towing tank. The aim of the experiments was to determine the effect of added resistance in waves on the various operating conditions of a VLCC. An analysis of the results was conducted to determine the characteristics of resistance performance in waves. In addition, the characteristics of added resistance on a tanker were analyzed under irregular waves based upon the above result. The experimental results showed that added resistance was the highest around λ/L = 1.0, and the added resistance increased with the increase of the ship speed. Furthermore, under even keel conditions, the added resistance was higher than that under the trim changes, and the smallest added resistance was measured at the trim by the stern. Based on the experimental results, this study proposes effective operating conditions by analyzing the characteristics of the mean added resistance and the expected extreme response in irregular waves.

Experimental Study on Added Resistance of VLCC for Ship’s Operating Condition in Waves

이상민 해양환경안전학회 2015 海洋環境安全學會誌 Vol.21 No.3

In this study, experiments were performed using a model of a very large crude oil carrier (VLCC), which is a typical blunt ship, in a wave-making towing tank. The aim of the experiments was to determine the effect of added resistance in waves on the various operating conditions of a VLCC. An analysis of the results was conducted to determine the characteristics of resistance performance in waves. In addition, the characteristics of added resistance on a tanker were analyzed under irregular waves based upon the above result. The experimental results showed that added resistance was the highest around λ/L=1.0, and the added resistance increased with the increase of the ship speed. Furthermore, under even keel conditions, the added resistance was higher than that under the trim changes, and the smallest added resistance was measured at the trim by the stern. Based on the experimental results, this study proposes effective operating conditions by analyzing the characteristics of the mean added resistance and the expected extreme response in irregular waves.

해수 중 SUS316 스텐레스강의 미생물 부식

김옥삼 전남대학교 수산과학연구소 2015 수산과학연구소논문집 Vol.23 No.-

The MIC (Microbiologically Influenced Corrosion) of lower deck steel plates in double hull VLCC (Very Large Crude Oil Carrier) cargo tanks has been focused because of severe localized corrosion. Recently, ship companies have reported that TMCP (Thermomechanical Control Process) steel plates have been showed more severe localized corrosion than conventional rolled steels. In order to elucidate the MIC resistance of TMCP steels by comparison with conventional rolled steels and normalized steels in environments of double hull VLCC cargo oil tanks, various measurements and corrosion tests were performed such as measurements of polarization curves, immersion tests in bacteria culture medium. All results revealed that SUS316 stainless steels have almost the same corrosion resistance in bacteria culture medium.

대형 유조선의 저항 및 추진성능에 대한 축척효과의 수치적 연구

최정은(Jung-Eun Choi),김정훈(Jung-Hun Kim),이홍기(Hong-Gi Lee) 대한조선학회 2011 대한조선학회 학술대회자료집 Vol.2011 No.6

This article examines the scale effect of the flow characteristics, resistance and propulsion performance on a 317k VLCC. The turbulent flows around a ship in both towing and self-propulsion conditions are analyzed by solving the Reynolds-averaged Navier-Stokes equation together with the application of Reynolds stress turbulence model. The computations are carried out in both model- and full-scale. A double-body model is applied for the treatment of free surface. An asymmetric body-force propeller is used. The speed performances including resistance and propulsion factors are obtained from two kinds of methods. One is to analyze the computational results in model scale through the revised ITTC'78 method. The other is directly to analyze the computational results in full scale. Based on the computational predictions, scale effects of the resistance and the self-propulsion factors including form factor, thrust deduction fraction, effective wake fraction and various efficiencies are investigated. Scale effects of the streamline pattern, hull pressure and local flow characteristics including x-constant sections, propeller and center plane, and transom region are also investigated. This study presents a useful tool to hull-form and propeller designers, and towing-tank experimenters to take the scale effect into consideration.

유조선 우이산호 사고를 통한 선속제어와 예선 활용 방안

정창현,김득봉,박영수 한국항해항만학회 2022 한국항해항만학회 학술대회논문집 Vol.2022 No.2

유조선 우이산호 부두시설 접촉사고는 광양항 원유 2부두에 접근 중 과도한 속력 등 도선사의 부적절한 도선으로 좌회두를 적절하게 통제하지 못해 발생한 사고이다. 광양항 원유 2부두에 접안하고자 하는 VLCC는 부두 법선을 감안하여 약 10도 이내의 경사각으로 서서히 속력을 감속하면서 부두 전면 해상으로 접근하여 부두로부터 선폭의 약 2∼3배 거리에 정선시킨 다음 예선의 도움을 받아 접안 예정 선박을 횡방향으로 5∼10 cm/s 속도로 평행 이동시켜 부두에 계류시키는 것이 통상적인 접안 방법이다. 하지만, 우이산호의 부두 접근 시 속력을 살펴보면, 부두 1마일 전에서 8.4노트, 부두 0.5마일 전에서 7.1노트, 그리고 부두 0.2마일 전에서 5.2노트로 정상적인 타 선박의 속력보다2∼3배 빠른 속력으로 부두에 접근하면서 예선을 사용하였음에도 속력제어에 실패하여 부두와 접촉한 사고이다.

Estimation of Optimum Tug Capacity for VLCC and Its Application to VLCC Terminal in Gwang-Yang Harbor

In-Young GONG,Chang-Min LEE,Chan-Su YANG,Han-Jin LEE 한국항해항만학회 2004 한국항해항만학회 학술대회논문집 Vol.5 No.-

The total tug capacity needed for berthing/de-berthing operations of a ship may vary depending on the ship type, size, loading conditions, and environmental circumstances. Traditionally, total tug capacity is determined based on the local guidelines of port authorities or on the rule of thumb. However, the social demands for the enhancement of ship safety at harbor and the economical demands for the cost-effectiveness of tug usage makes it necessary for port authorities to develop more reasonable and detailed guidelines on tug usage which takes various conditions into account. In this paper, the method to estimate the optimum tug capacity of VLCC is suggested by considering various ship conditions such as its size, loading conditions, and environmental circumstances such as wind, wave, tidal currents, and geographical characteristics of a terminal. This method is applied to a VLCC terminal located in Gwang-Yang Harbor of Korea and the results are compared with the local guidelines of the harbor, which shows that there may be a room for the amendment of local guidelines on tug usage.