Atlantoaxial Stabilization Using C1 and C2 Laminar Screw Fixation

Takashi Tsuji,Kazuhiro Chiba,Yosuke Horiuchi,Tadahisa Urabe,Shota Fujita,Morio Matsumoto 대한척추외과학회 2017 Asian Spine Journal Vol.11 No.2

We describe the use of a C1 laminar screw in combination with a C2 laminar screw as a salvage technique to treat two patients, one with persistent first intersegmental artery and the other with vertebral artery occlusion after cervical spine fracture. The combined use of C1 and C2 laminar screws allows for good fixation of the atlantoaxial joint with a lower risk of vertebral artery injury; therefore, it can be an alternative surgical procedure for patients with congenital or traumatic anomalous vertebral artery.

Mechanical Thrombectomy for Large Vessel Occlusion via the Transbrachial Approach: Case Series

Tsuji Yuichiro,Miki Takanori,Kakita Hiroto,Sato Kimitoshi,Yoshida Takashi,Shimizu Fuminori 대한신경중재치료의학회 2020 Neurointervention Vol.15 No.2

Mechanical thrombectomy has become a standard treatment for acute ischemic stroke with large vessel occlusion. In aged patients, it is difficult to guide the catheter via the transfemoral approach due to vessel tortuosity and aortic elongation. We report our preliminary clinical experience using the transbrachial approach. Among the 119 patients who underwent thrombectomy from April 2018 to December 2019, a total of 5 patients were treated via the transbrachial approach. Clinical outcomes were retrospectively analyzed. Successful reperfusion was achieved in 4 out of 5 cases. There was 1 death due to symptomatic intracranial hemorrhage. One patient had a good outcome at discharge. There were no access-site complications associated with any of these cases. Transbrachial access for mechanical thrombectomy is feasible and can provide an alternative to the transfemoral approach.

Screening for Lynch syndrome using risk assessment criteria in patients with ovarian cancer

Takashi Takeda,Kosuke Tsuji,Kouji Banno,Megumi Yanokura,Yusuke Kobayashi,Eiichiro Tominaga,Daisuke Aoki 대한부인종양학회 2018 Journal of Gynecologic Oncology Vol.29 No.3

Objective: Lynch syndrome is a cancer predisposition syndrome caused by germline mutation of DNA mismatch repair (MMR) genes. Lynch syndrome only causes about 0.4% of cases of ovarian cancer, which suggests that universal screening may not be cost-efficient. However, the frequency of Lynch syndrome in ovarian cancer is unclear in the Asian population. The goal of the study was to investigate a screening strategy using family history. Methods: The subjects were 129 patients with ovarian cancer. Clinical and family history were collected using a self-administered questionnaire, and Society of Gynecologic Oncology (SGO) criteria 2007 and PREMM5 were used for risk assessment. Microsatellite instability, immunohistochemistry, and methylation of MMR genes were analyzed. Results: Of the 129 cases, 25 (19.4%) met the SGO criteria, and 4 of these 25 had MSI-high and MMR deficiency. Two cases had loss of MSH2 and MSH6, indicating MSH2 mutation, and the other two had loss of MLH1 and PMS2, including one without MLH1 methylation indicating MLH1 mutation. These results show that screening using family history can detect Lynch syndrome in 12.0% (3/25) of ovarian cancer cases. The 3 cases were positive for PREMM5, but negative for Amsterdam II criteria and revised Bethesda guidelines. Genetic testing in one case with MSH2 and MSH6 deficiency confirmed the diagnosis of Lynch syndrome with MSH2 mutation. Conclusion: This is the first study of screening for Lynch syndrome in ovarian cancer using clinical and family history in an Asian population. This approach may be effective for diagnosis in these patients.

Business Collaboration Support for Offshore Software Development

Takashi Moriyasu,Guowei Zu,Hiroshi Tsuji 대한산업공학회 2010 Industrial Engineeering & Management Systems Vol.9 No.3

Offshore software development (OSD) is international business collaboration. OSD projects often encounter intercultural and inter-linguistic problems disturbing the projects. Business documents are formal media of information and knowledge for OSD. While OSD documents should convey common understanding of the OSD products, the documents may contain unsuitable expressions which draw misunderstanding of the required products and offensive issues for the collaboration. Intercultural and inter-linguistic differences cause mistakes and inappropriate expressions. OSD from Japan to China is the largest in Asia, and Japanese language is often used in OSD documents. Large similarity is found between Japanese and Chinese in their languages, while many differences exist even for the same word. The similarity induces to write unsuitable expressions for both sides of OSD. To introduce risks for OSD projects caused by unsuitable or inappropriate expressions in OSD documents, we propose to apply a proofreading system of Japanese documents for OSD. Japanese consignor uses the system to refine OSD documents written by Japanese engineers for Chinese readers, and Chinese consignee uses it to refine Japanese documents written by Chinese Engineers as derivatives of OSD projects. Effectiveness of applying the proofreading system is discussed for actual projects.

Management of Structured Documents for Business Collaboration

Takashi Moriyasu,Hiroshi Tsuji 한국멀티미디어학회 2009 한국멀티미디어학회 국제학술대회 Vol.2009 No.-

Documents are formal media of information and knowledge for business. Volumes of documents are produced for business collaboration. They are processed collaboratively and concurrently by multiple persons involved in the business collaboration. To encourage context awareness of the collaborative and concurrent processing of documents, this paper proposes a management model of structured document. Analyzing the structure and semantic of business documents, the paper focuses on the relations between parts of documents. According to the requirement of business collaboration on document parts, it is found that the model should consist of commitment model and notification model. The commitment model propagates commitment of a person to a document part through relations between document parts according with the document model. When a person is responsible to a part, she/he is supposed to indirectly commit to some parts relating to the part. The notification model is built on the document model and the commitment model. Awareness of collaboration context for each member is one of critical problems for concurrent, asynchronous, and distributed collaboration to produce documents. Changes of document parts are notified to the collaboration members who commit the parts directly or indirectly. It supports document processing for business collaboration.

Business Collaboration Support for Offshore Software Development

Moriyasu, Takashi,Zu, Guowei,Tsuji, Hiroshi Korean Institute of Industrial Engineers 2010 Industrial Engineeering & Management Systems Vol.9 No.3

Offshore software development (OSD) is international business collaboration. OSD projects often encounter intercultural and inter-linguistic problems disturbing the projects. Business documents are formal media of information and knowledge for OSD. While OSD documents should convey common understanding of the OSD products, the documents may contain unsuitable expressions which draw misunderstanding of the required products and offensive issues for the collaboration. Intercultural and inter-linguistic differences cause mistakes and inappropriate expressions. OSD from Japan to China is the largest in Asia, and Japanese language is often used in OSD documents. Large similarity is found between Japanese and Chinese in their languages, while many differences exist even for the same word. The similarity induces to write unsuitable expressions for both sides of OSD. To introduce risks for OSD projects caused by unsuitable or inappropriate expressions in OSD documents, we propose to apply a proofreading system of Japanese documents for OSD. Japanese consignor uses the system to refine OSD documents written by Japanese engineers for Chinese readers, and Chinese consignee uses it to refine Japanese documents written by Chinese Engineers as derivatives of OSD projects. Effectiveness of applying the proofreading system is discussed for actual projects.

Improvement in facies discrimination using multiple seismic attributes for permeability modelling of the Athabasca Oil Sands, Canada

Koji Kashihara,Takashi Tsuji 한국지구물리.물리탐사학회 2010 지구물리와 물리탐사 Vol.13 No.1

This study was conducted to develop a reservoir modelling workflowto reproduce the heterogeneous distribution of effective permeability that impacts on the performance of SAGD (Steam Assisted Gravity Drainage), the in-situ bitumen recovery technique in the Athabasca Oil Sands. Lithologic facies distribution is the main cause of the heterogeneity in bitumen reservoirs in the study area. The target formation consists of sand with mudstone facies in a fluvial-to-estuary channel system,where the mudstone interrupts fluidflowand reduces effective permeability. In this study, the lithologic facies is classified into three classes having different characteristics of effective permeability, depending on the shapes of mudstones. The reservoir modelling workflow of this study consists of two main modules; facies modelling and permeability modelling. The facies modelling provides an identification of the three lithologic facies, using a stochastic approach, which mainly control the effective permeability. The permeability modelling populates mudstone volume fraction first, then transforms it into effective permeability.Aseries of flow simulations applied to mini-models of the lithologic facies obtains the transformation functions of the mudstone volume fraction into the effective permeability. Seismic data contribute to the facies modelling via providing prior probability of facies, which is incorporated in the facies models by geostatistical techniques. In particular, this study employs a probabilistic neural network utilising multiple seismic attributes in facies prediction that improves the prior probability of facies. The result of using the improved prior probability in facies modelling is compared to the conventional method using a single seismic attribute to demonstrate the improvement in the facies discrimination. Using P-wave velocity in combination with density in the multiple seismic attributes is the essence of the improved facies discrimination. This paper also discusses sand matrix porosity that makes P-wave velocity differ between the different facies in the study area, where the sand matrix porosity is uniquely evaluated using log-derived porosity,P-wave velocity and photographically-predicted mudstone volume.

Improvement in facies discrimination using multiple seismic attributes for permeability modelling of the Athabasca Oil Sands, Canada

Kashihara, Koji,Tsuji, Takashi Korean Society of Earth and Exploration Geophysici 2010 지구물리와 물리탐사 Vol.13 No.1

본 연구는 Athabasca 오일샌드광구의 역청 생산방법인, SAGD 수행에 영향을 주는 불균질한 유효투수도의 분포도를 만드는 저류층 모델링 작업 공정을 개발하기 위한 것이다. 암석학적 상 분포는 연구 지역 역청 저류층 내의 불균질성의 주요 원인이다. 대상 매질은 사암과 이암으로 구성된 하천에서 바다로 이어지는 채널로서 이암이 유체의 흐름을 방해해 유효 투수도를 감소시키고 있다. 본 연구에서는 암석학적 상등을 이암의 모양에 따라 마른 특성의 유효투수도를 갖는 세 종류로 분류하였다. 본 연구의 저류층 모델링 작업과정은 상 모델과 투수도 모델링, 두 가지 주요 모듈로 구성되어 있다. 상 모델링은 확률적인 접근을 이용하여 유효투수도 결정에 중요한, 세가지 상등 중에 어떤 종류에 속하는지를 알려준다. 투수도 모델링은 먼저 이암의 체적율을 구하고 그것을 유효투수도로 변환시킨다. 암석상들의 소형 모델에 대한 일련의 시뮬레이션 적용을 통해 이암 체적율을 유효투수도로 변환시키는 변환함수를 얻는다. 탄성파 자료는 지구통계학적 방법으로 상 모델링에 입력되는 상등의 우선 확률을 제공함으로써 상 모델링에 기여한다. 특히, 본 연구에서는 상들의 우선 확률을 개선하기 위해 상등의 예측 시 다양한 탄성파 속성들을 복합적으로 사용하는 신경망 방법을 이용하였다. 상 구분에 있어서의 얼마만큼 개선되었는지를 보여주기 위해 상 모델링 시 개선된 우선 확률을 사용한 결과를 단일 탄성파 속성을 이용하는 기존 방법의 결과와 비교하였다. 다중 탄성파 속성들의 복합적인 사용에서 밀도와 P파 속도를 조합해서 이용하는 것이 상구분을 향상시키는데 필수적이다. 또한 본 연구에서는 검층으로부터 얻은 공극률과 P파 속도, 사진찍은 것 같이 예측된 이암의 부피를 이용하여 sand matrix의 공극률이 정확하게 평가원 연구지역에서, 다른 상등 사이에서 P파 속도가 달라지게 하는 sand matrix의 공극률에 대해서도 논의하였다. This study was conducted to develop a reservoir modelling workflow to reproduce the heterogeneous distribution of effective permeability that impacts on the performance of SAGD (Steam Assisted Gravity Drainage), the in-situ bitumen recovery technique in the Athabasca Oil Sands. Lithologic facies distribution is the main cause of the heterogeneity in bitumen reservoirs in the study area. The target formation consists of sand with mudstone facies in a fluvial-to-estuary channel system, where the mudstone interrupts fluid flow and reduces effective permeability. In this study, the lithologic facies is classified into three classes having different characteristics of effective permeability, depending on the shapes of mudstones. The reservoir modelling workflow of this study consists of two main modules; facies modelling and permeability modelling. The facies modelling provides an identification of the three lithologic facies, using a stochastic approach, which mainly control the effective permeability. The permeability modelling populates mudstone volume fraction first, then transforms it into effective permeability. A series of flow simulations applied to mini-models of the lithologic facies obtains the transformation functions of the mudstone volume fraction into the effective permeability. Seismic data contribute to the facies modelling via providing prior probability of facies, which is incorporated in the facies models by geostatistical techniques. In particular, this study employs a probabilistic neural network utilising multiple seismic attributes in facies prediction that improves the prior probability of facies. The result of using the improved prior probability in facies modelling is compared to the conventional method using a single seismic attribute to demonstrate the improvement in the facies discrimination. Using P-wave velocity in combination with density in the multiple seismic attributes is the essence of the improved facies discrimination. This paper also discusses sand matrix porosity that makes P-wave velocity differ between the different facies in the study area, where the sand matrix porosity is uniquely evaluated using log-derived porosity, P-wave velocity and photographically-predicted mudstone volume.

Efficient Solid-phase Synthesis of 2,1,3-Benzothiadiazin-4-one 2-Oxides with SynPhase™ Lanterns

Makino, Shingo,Nakanishi, Eiji,Tsuji, Takashi Korean Chemical Society 2003 Bulletin of the Korean Chemical Society Vol.24 No.3

Multi-modal Characterization of Layered Paint Chips of Hit-and-run Cars for Forensic Purpose by μXRF, ATR-FTIR Imaging, and Raman Microspectrometric Techniques

Md Abdul Malek,Takashi Nakazawa,Hyun-Woo Kang,Kouichi Tsuji,Chul Un Ro 한국대기환경학회 2015 한국대기환경학회 학술대회논문집 Vol.2015 No.11