http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
접촉연소검지방식을 이용한 후막형 메탄가스센서의 제조 및 그 특성
박준식,이재석,홍성제,박효덕,신상모 경북대학교 센서기술연구소 1995 센서技術學術大會論文集 Vol.6 No.1
본 연구에서는 스크린 프린팅 기술을 이용한 병렬저항열원을 갖는 후막형 가연성 가스센서를 제조하고, 메탄가스에 대한 감도특성을 조사하였다 알루미나 기판의 양면 위에 제조된 병렬형 백금 후막발열체는 후막형 백금 저항체로 사용된 백금페이스트 온도 감지 특성과 표면 특성을 조사하여 paste A로 선정하였다. 제조된 백금 후막 발열체는 평균저항값이 1.8Ω이고, TCR값은 3685ppm/℃이었다. 제조된 백금 발열체상에 Pt과 Pd이 첨가된 촉매 페이스트를 제조하고 가지부는 Pt과 Pd가 첨가된 촉매를 스크린 프린팅하여 후막을 형성하고 열처리하여 제조하였다. 제조된 후막형 센서는 메탄가스에 대해 4.3mV/1009ppm의 감도를 보였으며, 소비전력은 2.12W이었다. We fabricated the sensors with parallel Pt heaters using screen printing process and investigated sensitivities to hydrocarbon gases. The paste A was selected as Pt paste for heater by investigated the properties of TCRs and thick film microstructures. The average resistance of parallel Pt heaters was 1.8Ω, and the best TCR obtained was 3685ppm/℃. On the top of the Pt heaters, a sensing layer added with Pt and Pd as catalyst paste was screen printed and heat treated. The sensitivity of fabricated the sensor was 4.3mV/1000ppm to methane. The power consumption of the sensors was 2.12watts
김건년,이보나,박효덕,신상모,이근혁,권혁채 경북대학교 센서기술연구소 1998 센서技術學術大會論文集 Vol.9 No.1
In this paper, we studied the anodic bonding of 5-inch silicon and #7740 Pyrex glass wafers with a thickness of 3mm by using the EV501 bonder and the Karl Suss SB6 bonder. The test conditions for anodic bonding of the EV501 bonder system with a full field electrode were temperature of 400 ℃ and voltage of 800V in a chamber pressure of 1X10^(3)mbar. The SB6 bonder with a star shaped electrode was tested at the temperature and voltage of 450 ℃ and 1300V in the atmosphere, respectively. As the results of test, we obtained the void free samples regardless of shape of substrates such as etched wafers with cavities and drilled glasses with holes.
집적화된 실리콘 압력센서의 출력전압 보상파라미터 추출 및 그 특성
이보나,김건년,박효덕,신상모,이경탁,김찬,권혁채,이상조,박현주 경북대학교 센서기술연구소 1998 센서技術學術大會論文集 Vol.9 No.1
An integrated silicon pressure sensor has been designed, fabricated and tested. The signal conditioning circuits were designed to include calibration and temperature compensation of output voltage through trimming of diffusion and ion-implanted resistors. Before trimming of resistors, the compensation parameters such as pressure sensitivity, temperature coefficient of pressure sensitivity, temperature coefficient of piezoresistors and pressure sensitivity of piezoresistors were measured. Then offset voltage, span, and temperature coefficients of offset voltage and span were calibrated by trimming of resistors. The measured output voltage met our design specification and simulation value above room temperature. But, the measured output voltage at -30°C deviated from our design specification and simulation value because the offset voltages were found to vary randomly as a function of temperature.
Si Bulk Micromachining을 위한 Wafer Rolling Etching 및 그 특성
김건년,이보나,박효덕,신상모,공경준,장동근,김병철,권혁채,이봉희 경북대학교 센서기술연구소 1998 센서技術學術大會論文集 Vol.9 No.1
A wafer rolling etching system for the silicon bulk micromachining has been designed and fabricated. The silicon diaphragms were anisotropically etched in a 24.5 weight percent KOH solution. Compared to the conventional KOH etching systems, pyramidal hillocks, and wave-shaped structures on the etched surfaces were greatly reduced by using this system. After etching for time of 438 minutes, the average etched depth and the etch-rate were measured to be 537μm and 1.22μm/min, respectively. The average etching uniformity of etching depth was 0.87% in 5-inch wafer. Our results showed that the wafer rolling method enhanced etch uniformity and etch rate.
Lee, Sang Bong,Ko, Kwang Ho,Shin, Jin Chul,Shin, Chan Young,Lee, Sang Derk 한국응용약물학회 1996 Biomolecules & Therapeutics(구 응용약물학회지) Vol.4 No.1
To investigate whether human β₂-adrenergic receptor devoid of the C-terminal two transmembrane helices retain its ligand binding activity and specificity, 5' 780-bp DNA fragment of the receptor gene which encodes amino acid 1-260 of human β₂-adrenergic receptor was subcloned into the bacterial fusion protein expression vector and expressed as a form of glutathione-S-transferase (GST) fusion protein in E. coli DH5 α. The receptor fusion protein was expressed as a membrane bound form which was verified by SDS-PAGE and Western blot. The fusion protein expressed in this study specifically bound β-adrenergic receptor ligand [³H] Dihydroalprenolol. In saturation ligand binding assay, the K_d value was 7.6 nM which was similar to that of intact β₂-adrenergic receptor in normal animal tissue (K_d=1∼2 nM) and the B_(max) value was 266 fmol/mg membrane protein. In competition binding assay, the order of binding affinity of various adrenergic receptor agonists to the fusion protein was isoproterenol≫epinephrine≥norepinephrine, which was similar to that of intact receptor in normal animal tissue. These results suggest that N-terminal five transmembrane helices of the β₂-adrenergic receptor be sufficient to determine the ligand binding activity and specificity, irrespective of the presence or absence of the C-terminal two transmembrane helices.
Lee, Sang Bong,Ko, Kwang Ho,Shin, Chan Young,Noh, Min Su,Lee, Sang Derk 한국응용약물학회 1995 Biomolecules & Therapeutics(구 응용약물학회지) Vol.3 No.4
The analysis of membrane receptors for hormones and neurotransmitters has progressed considerably by pharmacological and biochemical means and more recently through the use of specific antibodies. To generate and characterize a moloclonal antibody against β-adrenergic receptor, a synthetic β2-adrenergic receptor peptide (Phe-Gly-Asn-Phe-Trp-Cys-Phe-Trp-Thr-Ser-Ile-Asp-Val-Leu) which may comprise part of β-adrenergic receptor ligand binding pocket was coupled to Keyhole Limpet Hemocyanin (KLH) and used as an immunogen. Male BALB/C mice were immunized with this antigen and the immunized spleen was fused with myeloma SP2/0-Ag14 cells to produce monoclonal antibodies. Two clones were obtained but one of monoclonal antibodies, mAb5G09, was used throughout in this study because the other clone, mAb5A11 showed weak immunoreactivity against KLH as well. The mouse monoclonal antibody mAb5G09 produced in this study showed immunoreactivity to peptide-KLH conjugates and also to human A431 cells and guinea pig lung β2-adrenergic receptor as revealed by ELISA and western blot. In the course of determination of the effects of mAb5G09 on β-receptor ligand binding, it was observed that mAb5G09 specifically bound β-adrenergic radioligand [³H]dihydroalprenolol (DHA) with a dissociation constant (Kd) of 60 nM. The [³H]DHA binding activity of mAb5G09 had characteristics of immunoglobulins and the binding activity was not observed in the control anti-KLH monoclonal antibody. The monoclonal antibody, mAb5G09 produced in this study may provide useful models for the study of the structure of receptor binding sites.
김상협(Kim, Sang-Hyup),조현정(Cho, Hyun-Jung),김왕직(Kim, Wang-Jik),김호수(Kim, Ho-Soo),정성진(Jung, Sung-Jin),김덕문(Kim, Derk-Moon) 대한건축학회 2013 대한건축학회논문집 Vol.29 No.11
This study was built in the late Joseon seokbinggo will have seen how the structure and composition. Seokbinggo from the Three Kingdoms period, has a long history to modern times. Most are semi-circular arched form of seokbinggo. Tunnel-like structure without making hongyeseok all three arched at Cannes in Cannes for 5 pumpin than the skeleton, such as Sanya across arched across the flagstones between the Agency is to structure type. This is using both hongyeseok tunnel structure is the difference between creating a hongyegyo. This case with a skeleton structure of the Unified Silla cheongungyo Bulguksa and can be found in baekungyo that has a history.
盧相舜,吳永澤,金德柱 전북대학교 공업기술연구소 1982 工學硏究 Vol.12 No.-
The world has been more concerned about automobiles recently. Thus this study was attempted in viewpoint of the pcrformance of a spark ignition automotive enginc. Before the engien was operaated, experimental apparatuses were revised. For instance, the water feeding pipe was replaced by a water tank with a thermostat, the cooling fan was removed, and the exhaust gas pipe was cooled by issuing water through the pipe. At first, brake specific fuel consumption and engine output were studied, and we obtained the experimental formula of friction horse power as the parameter, engine speed The effect of spark advance on engine output was considered. Whereas the formula of engine noise was experimentally obtained as the parameters engine speed boosted pressure vacuum. The results are summarized as follows; 1. In the case of full-open throttle, brake specific fuel consumption and torque were minimum and maximum respectively due to volume efficiency and fricton loss in the vicinity of engine economical speed 3000 rpm, In the case of constant engine speed, the value of economical output is smaller than maximum output due to mixture ratio. 2. At full-open throttle, the value of friction horse power is p개portional to N^2.52(N: engine speed). 3. Spark advance is increase with engine speed, but it maintains constant above 3300 rpm. And it is also increased with boost pressure vacuum but it maintains constant above 0.28 atg vacuum. 4. Experimental formula of engine noise can be obtained as follows. ESP= 32.6 logN-5.7 logP-30.3
축조방법을 고려한 전통 민도리목구조의 구조해석모형에 관한 고찰
정성진(Jung, Sung-Jin),김호수(Kim, Ho-Soo),김왕직(Kim, Wang-Jik),김덕문(Kim, Derk-Moon),이민섭(Lee, Min-Sub),김석환(Kim, Seok-Hwan) 대한건축학회 2012 大韓建築學會論文集 : 構造系 Vol.28 No.11
Recently, most of field structural professionals use computer programs for the structural analysis of the traditional wood structures in their own way. However, in the structural analytical models used by these practicing professionals, it seems that there are many uncertainties existing in analytical model and complexities in modelling for a computer program. Therefore, a reasonable modeling method is required for the reduction of these uncertainties and complexities. In this paper, the structural characteristics of the traditional Mindori wood structure, which is the simplest structure among traditional wood structures, are investigated by the consideration of construction stage and a modelling method reducing complexities in analytical model is produced on the basis of investigation. Finally, a reasonable analytical model is assumed and some research subjects overcoming uncertainties are suggested.