S6K1 Phosphorylation of H2B Mediates EZH2 Trimethylation of H3: A Determinant of Early Adipogenesis

Yi, S.,Um, S.,Lee, J.,Yoo, J.,Bang, S.,Park, E.,Lee, M.,Nam, K.,Jeon, Y.,Park, J.,You, J.,Lee, S.J.,Bae, G.U.,Rhie, J.,Kozma, Sara C.,Thomas, G.,Han, J.W. Cell Press 2016 Molecular Cell Vol.62 No.3

S6K1 has been implicated in a number of key metabolic responses, which contribute to obesity. Critical among these is the control of a transcriptional program required for the commitment of mesenchymal stem cells to the adipocytic lineage. However, in contrast to its role in the cytosol, the functions and targets of nuclear S6K1 are unknown. Here, we show that adipogenic stimuli trigger nuclear translocation of S6K1, leading to H2BS36 phosphorylation and recruitment of EZH2 to H3, which mediates H3K27 trimethylation. This blocks Wnt gene expression, inducing the upregulation of PPARγ and Cebpa and driving increased adipogenesis. Consistent with this finding, white adipose tissue from S6K1-deficient mice exhibits no detectable H2BS36 phosphorylation or H3K27 trimethylation, whereas both responses are highly elevated in obese humans or in mice fed a high-fat diet. These findings define an S6K1-dependent mechanism in early adipogenesis, contributing to the promotion of obesity.

CBD 방법에 의한 CdS 박막의 성장과 광전도 특성

황광준,이상열,유상하,서상석,문종대,신영진,정태수,신현길,김택성,송정훈,유기수 全北大學校 基礎科學硏究所 1994 基礎科學 Vol.16 No.-

Chemical bath deposition 방법으로 다결정 CdS 박막을 세라믹 기판 위에 성장시킨 다음 온도를 변화시켜 열처리하고 X-선 회절무늬를 측정하여 결정구조를 밝혔다. 550℃로 열처리한 시료의 경우 X-선 회절무늬로 부터 외삽법에 의해 a_。와 c_。는 각각 4.1364 Å과 6.7129 Å인 육방정계임을 알았다. 이 때 낱알크기는 약 0.35㎛이었다. Van der Pauw 방법으로 Hall 효과를 측정하여 운반자 농도와 이동도의 온도의존성을 연구하였다. 이동도는 33 K 에서 150 K 까지는 압전산란에 의하여, 150 K 에서 293 K 까지는 극성광학산란에 의하여 감소하는 경향이 나타냈다. 광전도 셀의 특성으로 스텍트럼 응답, 감도(γ), 최대허용소비전력 및 응답 시간을 측정하였다. Polycrystalline CdS thin films were grown on creamic substrate using a chemical bath deposition method. They were annealed at various temperature and X-ray diffraction patterns were measured by X-ray diffractometer in order to study CdS polycrystal structure. Using extrapolation method of X-ray diffraction patterns for the CdS samples annealed in N_2 gas at 550℃ it was found hexagonal structure whose lattice constants a_o and c_o were 4.1364 Å and 6.7120Å, respectively. Its grain size was about 0.35 ㎛. Hall effect on this sample was measured by Van der Pauw method and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by piezo electric scattering at temperature range of 33K and 150K and by polar optical scattering at temperature range of 150K and 293K. We measured also spectral response, sensitivity (γ), maximum allowable power dissipation and response time on these samples.

Detection of Genotype associated with Disease Activity and Development of Probe

Jang,S. I.,Yoo,S. K.,Im,M. K.,Kim,J. H.,Kim,W. S.,You,Y. O.,Lee,D. K.,Kim,K. J.,Kim,W. S. 大韓顎顔面成形再建外科學會 1994 Maxillofacial Plastic Reconstructive Surgery Vol.16 No.4

질환성과 관련된 세균의 분포 및 유전자형을 탐색하고자 구강농양 및 골수염의 급성감염 혼자와 진료실 및 실험실의 정상인을 대상으로 시료를 채취하여 포도상구균을 분리 및 동정을 시행하고, 특성을 규명하였으며, plasmid 및 염색유전자를 분리하여 제한효소를 처리후 전기영동을 실시하고 분리된 plasmid로 탐색자를 제작하여 dot blot을 시행하였다. 대부분의 급성환자에서 분리된 포도상구균을 S. lugdunensis와 S. aureus이었으나, 진료실 및 실험실에서는 coagulase 음성 staphylococci가 분리되었다. 급성환자에서 분리된 포도상구균은 ampicillin과 penicillin에 내성을 보였다. 분리된 S. lugdunensis균주중 네 균주는 δ형의 용혈소를 생산하였다. Plasmid를 분리한 결과 S. lugdunensis균주중 세 균주는 약 6.5 kilobases이었으나 S. aureus는 약 4.3 kilobases 정도 크기의 band를 보였다. S. lugdunensis에서 분리된 plasmid로 제작한 탐색자로 dot blot를 시행한 결과 치과 영역에서 분리한 plasmid를 갖는 균주는 양성반응을 보였다. 염색체유전자의 유전자형을 분석한 결과 δ형의 용혈소를 생산한 네 균주의 S. lugdunensis는 유사한 유전자형을 보였다. 이러한 연구결과 질환의 진행에 S. lugdunensis가 중요한 역할을 하는 것으로 생각되고, 치과영역에 존재하는 plasmid는 공통적인 유전자 서열을 갖는 것으로 추정된다.

Chemical Bath Deposition 방법으로 제작한 CdSe 박막의 특성

홍광준,이상열,유상하,서상석,문종대,신영진,정태수,신현길,김택성,송정훈,유기수 全北大學校 基礎科學硏究所 1994 基礎科學 Vol.16 No.-

Chemical bath deposition 방법으로 다결정 CdSe 박막을 세라믹 기판 위에 성장시킨 다음 온도를 변화시켜 열처리하고 X-선 회절무늬를 측정하여 결정구조를 밝혔다. 450℃로 열처리한 시료가 X-선 회절무늬로 부터 외삽법에 의해 a_o와 c_o 는 각각 4.302 Å과 7.014 Å인 육방정계임을 알았다. 이 때 낱알크기는 약 0.3㎛이었다. Van der Pauw 방법으로 Hall 효과를 측정하여 운반자 농도와 이동도의 온도의존성을 연구하였다. 이동도는 33 K 에서 200 K 까지는 압전산란에 의하여, 200 k 에서 293 K 까지는 극성광학산란에 의하여 감소하는 경향이 나타냈다. 광전도 셀의 특성으로 스텍트럼 응답, 감도(γ), 최대허용소비전력 및 응답 시간을 측정하였다. Polycrystalline CdSe thin films were grown on creamic substrate using a chemical bath deposition (CBD) method. They were annealed at various temperature and X-ray diffraction patterns were measured by X-ray diffractometer in order to study CdSe polycrystal structure. Using extrapolation method of X-ray diffraction patterns for the CdSe samples annealed in N_2 gas at 450℃ it was found hexagonal structure whose lattice parameters a_o and c_o were 4.302 Å and 7.014 Å, respectively. It grain size was about 0.3 ㎛. Hall effect on this sample was measured by Van der Pauw method and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by piezo electric scattering at temperature range of 33 K and 200 K, and by polar optical potical scattering at temperature range of 200 K and 293 K. We measured also spectral response, sensitivily (γ), maximum allowable power dissipation and response time on these samples.

DROWSY BEHAVIOR DETECTION BASED ON DRIVING INFORMATION

M. S. WANG,N. T. JEONG,K. S. KIM,S. B. CHOI,S. M. YANG,S. H. YOU,J. H. LEE,서명원 한국자동차공학회 2016 International journal of automotive technology Vol.17 No.1

Drowsy behavior is more likely to occur in sleep-deprived drivers. Individuals’ drowsy behavior detection technology should be developed to prevent drowsiness related crashes. Driving information such as acceleration, steering angle and velocity, and physiological signals of drivers such as electroencephalogram (EEG), and eye tracking are adopted in present drowsy behavior detection technologies. However, it is difficult to measure physiological signal, and eye tracking requires complex experiment equipment. As a result, driving information is adopted for drowsy driving detection. In order to achieve this purpose, driving experiment is performed for obtaining driving information through driving simulator. Moreover, this paper investigates effects of using different input parameter combinations, which is consisted of lateral acceleration, longitudinal acceleration, and steering angles with different time window sizes (i.e. 4 s, 10 s, 20 s, 30 s, 60 s), on drowsy driving detection using random forest algorithm. 20 s-size datasets using parameter combination of accelerations in lateral and longitudinal directions, compared to the other combination cases of driving information such as steering angles combined with lateral and longitudinal acceleration, steering angles only, longitudinal acceleration only, and lateral acceleration only, is considered the most effective information for drivers’ drowsy behavior detection. Moreover, comparing to ANN algorithm, RF algorithm performs better on processing complex input data for drowsy behavior detection. The results, which reveal high accuracy 84.8 % on drowsy driving behavior detection, can be applied on condition of operating real vehicles.

Sulfur to oxygen substitution in BiOCuSe and its effect on the thermoelectric properties

Han, M. K.,Jin, Y. S.,Yu, B.,Choi, W.,You, T. S.,Kim, S. J. Royal Society of Chemistry 2016 Journal of Materials Chemistry A Vol.4 No.36

<P>The effects of S doping at the oxygen site on the thermoelectric properties of BiOCuSe have been investigated. The partial substitution of S ions at the O sites of BiOCuSe was achieved by sulfurization using CS2 gas. Analysis of the powder X-ray diffraction data indicates that the ZrCuSiAs structure of BiOCuSe is retained after sulfurization. Substitution of O with S leads to an increase in the lattice parameters and a decrease in the band gap. The electrical conductivity rises due to the increase of the electronic contribution with doping. S-doped BiOCuSe materials behave as a p-type semiconductor. The thermoelectric properties of S-doped BiOCuSe materials can be understood through the analysis of the electronic band structure and the density of states close to the Fermi level. The substitution of O sites with S provides possible directions toward the enhancement of the thermoelectric figure of merit of oxide materials with low electrical conductivity.</P>

Chemical Bath Deposition 방법으로 제작한 CdSe 박막의 특성

신영진 ( Y . J . Shin ),홍광준 ( K . J . Hong ),이상열 ( S . Y . Lee ),유상하 ( S . H . You ),서상석 ( S . S . Suh ),문종대 ( J . D . Moon ),신현길 ( H . K . Shin ),김택성 ( T . S . Kim ),송정훈 ( J . H . Song ),유기수 ( K . S . R 한국센서학회 1993 센서학회지 Vol.2 No.1

Polycrystalline CdSe thin films were grown on ceramic substrate using a chemical bath deposition (CBD) method. They were annealed at various temperature and X-ray diffraction patterns were measured by X-ray diffractometer in order to study CdSe polycrystal structure. Using extrapolation method of X-ray diffraction patterns for the CdSe samples annealed in N₂ gas at 450℃ it was found hexagonal structure whose lattice parameters a_o and c_o were 4.302 A and 7.014 A, respectively. Its grain size was about 0.3 ㎛. Hall effect on this sample was measured by Van der Pauw method and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by piezo electric scattering at temperature range of 33 K and 200 K, and by polar optical scattering at temperature range of 200 K and 293 K. We measured also spectral response, sensitivity (γ), maximum allowable power dissipation and response time on these samples.

$CuInTe_2$ 단결정 성장과 특성연구(II)

유상하,홍광준,이상렬,신용진,이관교,서상석,김승욱,정준우,신영진,정태수,신현길,김택성,문종대,You S.H.,Hong K.J.,Lee S.Y.,Shin Y.J.,Lee K.K.,Suh S.S.,Kim S.U.,Jeong J.W.,Shin Y.J.,Jeong T.S.,Shin B.K.,Kim T.S.,Moon J.D. 한국결정학회 1997 韓國結晶學會誌 Vol.8 No.1

[ $CuInTe_2$ ] 다결정은 수평전기로에서 합성하고, $CuInTe_2$ 단결정은 수직 Bridgman 방법으로 성장시켰다. $CuInTe_2$ 단결정의 c축에 수직 및 평행한 시료의 광전도도와 광발광특성을 293K에서 20 K의 온도영역에서 측정하였다. 측정된 광전류 봉우리로부터 구한 c축에 수직 및 평행한 시료의 에너지 띠 간격은 상온에서 각각 0.948 eV와 0.952 eV였다. 광전류 봉우리와 광발광 봉우리의 에너지차는 포논에너지이며 상온에서 c축에 수직 및 평행한 시료의 에너지차는 각각 22.12 meV와 21.4 meV였다. 또한 광전류 스펙트럼으로부터 시료의 spin-orbit 상호작용과 결정장 상호작용에 의한 가전자대의 갈라짐 ${\Delta}cr$과 ${\Delta}so$는 각각 0.046, 0.014 eV였다. [ $CuInTe_2$ ] synthesised in a horizontal electric furnace was found to be polycrystalline. Single crystals of $CuInTe_2$ were grown with the vertical Bridgman technique. The photoconductivity and photoluminescence of the crystals were measured in the temperature range 20 to 293 K. From the photocurrent peaks measured for the samples both perpendicular and parallel to c-axis, the energy band gaps of the samples were found to be 0.948 eV and 0.952 eV at room temperature respectively. The energy difference of the photocurrent and photoluminescence peaks of the samples both perpendicular and parallel to the c-axis measured at room temperature was a phonon energy, and its values were 22.12 meV and 21.4 meV respectively. The splitting of the valence band due to spin-orbit and crystal field interaction was calculated from the photocurrent spectra of the samples, The ${\Delta}cr\;and\;{\Delta}so$ are 0.046,0.014 eV respectively.

Investigation of the structural, electrical, and optical properties of MnAl2Se4 layers grown using the hot-wall deposition technique

You, S. H.,Hong, K. J.,Jeong, J. W.,Jeong, T. S.,Youn, C. J.,Moon, J. D. 한국물리학회 2016 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol. No.

<P>MnAl2Se4 layers were grown using the hot-wall deposition technique with an attached reservoir tail. Precise control of the vapor pressure in the reservoir was thought to play an important role in the grown of a stoichiometric layer. From the relation between the reciprocal temperature and the carrier concentration, we extracted the dominant trap level as 96.1 meV in the high-temperature region and 13.9 meV in the middle-temperature region. Thus, from a log-log plot between the mobility and the temperature, the mobility showed the different temperature-dependent decreases of the mobility at temperatures above 100 K: T (-1/2) in the temperature range of 100 < T < 225 K and T (-3/2) in the temperature of T > 225 K. The mobility decreased in proportion to T (1) in the low-temperature range of T < 100 K. By analyzing the optical absorption results, the bandgap variation matched E (g) (T) = E (g) (0) - 3.19 x 10(-3) T (2)/(T + 488) well, where E (g) (0) is estimated to be 3.5616 eV. Consequently, low-temperature growth of MnAl2Se4 layers was achieved by using the hot-wall deposition technique.</P>

ZnIn₂S₄단결정 박막의 성장과 광학적 특성

홍광준,유상하,방진주,김소형,여희숙,양혜정,김현수 경북대학교 센서기술연구소 2002 센서技術學術大會論文集 Vol.13 No.1