CT Findings of Persistent Pure Ground Glass Opacity: Can We Predict the Invasiveness?

Liu, Li-Heng,Liu, Ming,Wei, Ran,Jin, Er-Hu,Liu, Yu-Hui,Xu, Liang,Li, Wen-Wu,Huang, Yong Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.5

Background: To investigate whether CT findings can predict the invasiveness of persistent cancerous pure ground glass opacity (pGGO) by correlating the CT imaging features of persistent pGGO with pathological changes. Materials and Methods: Ninety five patients with persistent pGGOs were included. Three radiologists evaluated the morphologic features of these pGGOs at high resolution CT (HRCT). Binary logistic regression was used to assess the association between CT findings and histopathological classification (pre-invasive and invasive groups). Receiver operating characteristic (ROC) curve analysis was performed to evaluate the diagnostic performance of diameters. Results: A total of 105 pGGOs were identified. Between pre-invasive (atypical adenomatous hyperplasia, AAH, and adenocarcinoma in situ, AIS) and invasive group (minimally invasive adenocarcinoma, MIA and invasive lung adenocarcinomas, ILA), there were significant differences in diameter, spiculation and vessel dilatation (p<0.05). No difference was found in air-bronchogram, bubble-lucency, lobulated-margin, pleural indentation or vascular convergence (p>0.05). The optimal threshold value of the diameters to predict the invasiveness of pGGO was 12.50mm. Conclusions: HRCT features can predict the invasiveness of persistent pGGO. The pGGO with a diameter more than 12.50mm, presences of spiculation and vessel dilatation are important factors to differentiate invasive adenocarcinoma from pre-invasive cancerous lesions.

Visual Fatigue Reduction Based on Depth Adjustment for DIBR System

( Ran Liu ),( Yingchun Tan ),( Fengchun Tian ),( Hui Xie ),( Guoqin Tai ),( Weimin Tan ),( Junling Liu ),( Xiaoyan Xu ),( Chaibou Kadri ),( Naana Abakah ) 한국인터넷정보학회 2012 KSII Transactions on Internet and Information Syst Vol.6 No.4

A depth adjustment method for visual fatigue reduction for depth-image-based rendering (DIBR) system is proposed. One important aspect of the method is that no calibration parameters are needed for adjustment. By analyzing 3D image warping, the perceived depth is expressed as a function of three adjustable parameters: virtual view number, scale factor and depth value of zero parallax setting (ZPS) plane. Adjusting these three parameters according to the proposed parameter modification algorithm when performing 3D image warping can effectively change the perceived depth of stereo pairs generated in DIBR system. As the depth adjustment is performed in simple 3D image warping equations, the proposed method is facilitative for hardware implementation. Experimental results show that the proposed depth adjustment method provides an improvement in visual comfort of stereo pairs as well as generating comfortable stereoscopic images with different perceived depths that people desire.

Isolation and molecular characterization of two novel HMW-GS genes from Chinese wheat (Triticum aestivum L.) landrace Banjiemang

Hui Shao,Tian-hong Liu,Cong-Fu Ran,Li-Qun Li,Jing Yu,Xin Gao,Xue-Jun Li 한국유전학회 2015 Genes & Genomics Vol.37 No.1

High molecular weight glutenin subunits(HMW-GS) play a significant role in determining breadmakingqualities of common wheat flour. The study presentedin the paper identified two novel HMW-GS (designatedas 1Bx14* and 1By15*) at the Glu-B1 locus inChinese wheat (Triticum aestivum L.) landrace Banjiemangby SDS-PAGE. The open reading frames (ORFs) of thegenes were amplified and cloned with designed specificprimers. Both of them had sequences highly similar tothose of other HMW-GS genes, but displayed minormodification. The ORF of 1Bx14* was 2367 bp long andencoded 789 aa with 4 cysteines, which included 25nanopeptides, 65 hexapeptides and 7 tripeptides motifs. The ORF of 1By15* was 2106 bp long and encoded 702 aawith 7 cysteines, which included 23 nanopeptides and 53hexapeptides motifs. The predicted molecular weights ofthe mature proteins encoded by 1Bx14* and 1By15* geneswere 83.1 and 73.2 k Da, respectively. The presence andauthenticity of the two genes in Banjiemang were confirmedby bacterial expression and liquid chromatographyelectrosprayionization mass spectrometry (LC–ESI–MS). By phylogenetic analysis, the 1Bx14* was clustered withx-type subunits but had a high divergence with other 1Bxsubunits, whereas the 1By15* was clustered with y-typesubunits and closely related to subunit 1By15. The studyconcluded that 1Bx14* and 1By15* from Banjiemang werenovel allelic variations of HMW-GS at Glu-B1 locus,which were probably exploitable as new resources forwheat quality improvement.

Hole-filling Based on Disparity Map for DIBR

( Ran Liu ),( Hui Xie ),( Fengchun Tian ),( Yingjian Wu ),( Guoqin Tai ),( Yingchun Tan ),( Weimin Tan ),( Bole Li ),( Hengxin Chen ),( Liang Ge ) 한국인터넷정보학회 2012 KSII Transactions on Internet and Information Syst Vol.6 No.10

Due to sharp depth transition, big holes may be found in the novel view that is synthesized by depth-image-based rendering (DIBR). A hole-filling method based on disparity map is proposed. One important aspect of the method is that the disparity map of destination image is used for hole-filling, instead of the depth image of reference image. Firstly, the big hole detection based on disparity map is conducted, and the start point and the end point of the hole are recorded. Then foreground pixels and background pixels are distinguished for hole-dilating according to disparity map, so that areas with matching errors can be determined and eliminated. In addition, parallaxes of pixels in the area with holes and matching errors are changed to new values. Finally, holes are filled with background pixels from reference image according to these new parallaxes. Experimental results show that the quality of the new view after hole-filling is quite well; and geometric distortions are avoided in destination image, in contrast to the virtual view generated by depth-smoothing methods and image inpainting methods. Moreover, this method is easy for hardware implementation.

Study on the Influence of Stiffeners on the Wind Resistance Performance of Aluminum Panel Curtain Wall

Cun Hui,Siyan Wang,Mingliang Liu,Weichi Han,Ran Hai 한국강구조학회 2022 International Journal of Steel Structures Vol.22 No.4

In order to study the infl uence of stiff eners on the wind resistance performance of the aluminum panel curtain wall unit (APCU), two APCU specimens with diff erent structures were designed and fabricated. The deformations under positive and negative wind loads were studied. The defl ection, stress, and mode were analyzed by fi nite element software. The results indicate that the stiff eners and the aluminum panels work well with each other under positive and negative wind pressure. Adequately designed stiff eners can eff ectively improve the wind resistance of the APCU, reduce the deformation of the aluminum curtain wall, and make the stress distribution uniform. The shedding of aluminum welding nails has a signifi cant impact on the overall wind resistance performance of the component. The aluminum panels and the stiff eners reduce the wind resistance performance of the APCU when the aluminum panels and stiff eners are not fi rmly connected. The modal analysis points out the weak point of the specimens. The fi nite element calculations and analysis results are consistent with the actual measurement results. The research results can guide engineering applications. The research in this paper can provide guidance for wind resistance of aluminum plate, defl ection deformation of stiff ening rib, failure of aluminum plate under wind pressure and engineering research of aluminum curtain wall system under wind load.

Gut microbiota metabolic characteristics in coronary artery disease patients with hyperhomocysteine

Tian Ran,Liu Hong-Hong,Feng Si-Qin,Wang Yi-Fei,Wang Yi-Yang,Chen Yu-Xiong,Wang Hui,Zhang Shu-Yang 한국미생물학회 2022 The journal of microbiology Vol.60 No.4

Hyperhomocysteine (HHcy) is known as a risk factor for coronary artery disease (CAD). Despite the knowledge that gut microbiota related metabolism pathway shares metabolites with that of Hcy, little has been shown concerning the association between HHcy and gut microbiota. To explore their relationship in the context of CAD, 105 patients and 14 healthy controls were recruited from one single medical center located in Beijing, China. Their serum and fecal samples were collected, with multi-omics analyses performed via LC/MS/ MS and 16S rRNA gene V3-V4 region sequencing, respectively. Participants from the prospective cohort were divided into CAD, CAD & HHcy and healthy controls (HC) groups based on the diagnosis and serum Hcy concentration. The results revealed significant different metabolic signatures between CAD and CAD & HHcy groups. CAD patients with HHcy suffered a heavier atherosclerotic burden compared to CAD patients, and the difference was closely associated to betaine-homocysteine S-methyltransferase (BHMT)-related metabolites and trimethylamine N-oxide (TMAO)-related metabolites. Dimethylglycine (DMG) exhibited a strong positive correlation with serum total Hcy (tHcy), and TMAO and trimethylysine (TML) were associated with heavier atherosclerotic burden. Multiple other metabolites were also identified to be related to distinct cardiovascular risk factors. Additionally, Clostridium cluster IV and Butyricimonas were enriched in CAD patients with elevated tHcy. Our study suggested that CAD patients with elevated tHcy were correlated with higher atherosclerotic burden, and the impaired Hcy metabolism and cardiovascular risk were closely associated with BHMT-related metabolites, TMAO-related metabolites and impaired gut microbiota homeostasis.

Influence of different fatigue loads and coating thicknesses on service performance of RC beam specimens with epoxy-coated reinforcement

Xiao-Hui Wang,Yang Gao,Run-Dong Gao,Jing Wang,Xi-La Liu 사단법인 한국계산역학회 2017 Computers and Concrete, An International Journal Vol.19 No.3

Epoxy-coated reinforcing bars are widely used to protect the corrosion of the reinforcing bars in the RC elements under their in-service environments and external loads. In most field surveys, it was reported that the corrosion resistance of the epoxy-coated reinforcing bars is typically better than the uncoated bars. However, from the experimental tests conducted in the labs, it was reported that, under the same loads, the RC elements with epoxy-coated reinforcing bars had wider cracks than the elements reinforced with the ordinary bars. Although this conclusion may be true considering the bond reduction of the reinforcing bar due to the epoxy coating, the maximum service loads used in the experimental research may be a main reason. To answer these two phenomena, service performance of 15 RC beam specimens with uncoated and epoxy-coated reinforcements under different fatigue loads was experimentally studied. Influences of different coating thicknesses of the reinforcing bars, the fatigue load range and load upper limit as well as fatigue load cycles on the mechanical performance of RC test specimens are discussed. It is concluded that, for the test specimens subjected to the comparatively lower load range and load upper limit, adverse effect on the service performance of test specimens with thicker epoxy-coated reinforcing bars is negligible. With the increments of the coating thickness and the in-service loading level, i.e., fatigue load range, load upper limit and fatigue cycles, the adverse factor resulting from the thicker coating becomes noticeable.

Experimental and Numerical Investigation on Load-Bearing Performance of Aluminum Alloy Upright Column in Curtain Walls Under Wind Pressure

Cun Hui,Qi Shang,Pan Liu,Ran Hai 대한토목학회 2020 KSCE JOURNAL OF CIVIL ENGINEERING Vol.24 No.3

In this paper, the wind resistance performance test and numerical simulation analysis of aluminum alloy columns with different structural measures in unit glass curtain walls are carried out. The two-layer experimental model were composed of 12 unit curtain walls, of which there are 2 beams at a distance of 1.2 m from the top and bottom in 9 unit curtain walls respectively, and there is only one beam at a distance of 1.2 m from the top in 3 unit curtain walls. The dimension of each unit curtain wall is 1.2 m × 4.0 m. The section shape of the experimental model is L-shaped. Firstly, the experimental investigation and analysis of the model with arrangement of one pair of hooks under positive and negative wind were carried out. Secondly, the experimental investigation and analysis of the model with no hooks under positive and negative wind were carried out. The out-of-plane deformation, in-plane deformationand the strain of the columns were collected and analyzed. Finally, finite element analysis model was established. The similarities and differences of the analysis results and the experimental results were analyzed. The results show that the beam has a small constraint on the columns whether the wind pressure is positive or negative when the number and position of hooks are reasonable. When the wind pressure is negative, the hook has little effect on the out-of-plane deformation and stability. Under the action of positive wind, the hooks can significantly reduce the in-plane deformation and restrain the lateral torsion deformation of the columns.

Research on the Compression Behavior of Steel Reinforced Concrete Columns With Built-in Steel Tubes

Cun Hui,Fan Zhang,Zhizeng Zhang,Xiaoli Liu,Ran Hai,John J. Myers 한국강구조학회 2020 International Journal of Steel Structures Vol.20 No.4

In order to study the compression behavior of rectangular steel reinforced concrete columns with built-in steel tubes under diff erent eccentric loads, three 1/10 scale specimens were designed and monotonic loading tests were carried out on them. The dimensions, steel bars and steel tube of the three specimens were the same except for the location of the loading point. The eccentricity ratios of the three specimens were 0, 0.25 and 0.5, respectively. The failure modes, load-bearing capacity and displacement characteristics of the test specimens were analyzed. According to the Chinese code, the load-bearing capacity calculation principles and methods of steel reinforced concrete columns with built-in steel tube were investigated for the comparison. The study shows that the peak vertical loads of specimens decrease and the corresponding vertical and horizontal peak displacement increase as the eccentricity increases. The load-bearing capacity calculation results from Chinese code are slightly smaller than the test result because of the unconsidered sleeve eff ect of the internal steel tube. The errors between them are small, and the calculation methods are benefi cial to ensure the structural safety.

Optimization of the microemulsion formulation of curcuma oil and evaluation of its acaricidal efficacy against Tetranychus cinnabarinus (Boisduval) (Acari: Tetranychidae)

Cheng Zuo-Hui,Fan Fang-Fang,Zhao Jin-Zhong,Li Rui,Li Sheng-Cai,Zhang En-Jia,Liu Yu-Kun,Wang Jue-Ying,Zhu Xiang-Run,Tian Yong-Ming 한국응용곤충학회 2020 Journal of Asia-Pacific Entomology Vol.23 No.4

The microemulsion formulation (hereafter formulation) of curcuma oil and its acaricidal efficacy against Tetranychus cinnabarinus Boisduval (Acari: Tetranychidae) were optimized in the laboratory to evaluate their spray effectiveness of oviposition inhibition and repellence. Ethovision XT6 was used to analyse the effects of the sublethal concentrations (LC 20 ) of curcuma oil and the formulation on the behaviors of T. cinnabarinus. The results showed that Tween-80 was the best surfactant, Isopropanol was the best co-surfactant and K m = 2:1 was the best condition for the formulation. The prepared microemulsions are stable under conditions of centrifugation and incubation for extended periods. The results showed that the effect of the spray bioassays of the formulation against T. cinnabarinus continuously increased during the experiment, but for curcuma oil almost no longer increase observed when the exposure time went beyond 24 h. Moreover, compared with curcuma oil (LC 50 = 0.716%), the spray bioassay of the formulation (LC 50 = 0.035%) was stronger against T. cinnabarinus. The repellency of the formulation to T. cinnabarinus was stronger with increasing exposure time, but that of curcuma oil declined after 12 h of exposure. The mobile distance of T. cinnabarinus treated with the formulation continuously declined during the experiment but that due to the curcuma oil almost no longer declined when the treatment time reached 12 h. The maximum mobile frequency of T. cinnabarinus treated by curcuma oil and the formulation was recorded at 6 h and 12 h, respectively. Thus, the formulation is a promising candidate as a botanical acaricide of green vegetables.