Can a spontaneous smile invalidate facial identification by photo-anthropometry?

Pinto, Paulo Henrique Viana,Rodrigues, Caio Henrique Pinke,Rozatto, Juliana Rodrigues,da Silva, Ana Maria Bettoni Rodrigues,Bruni, Aline Thais,da Silva, Marco Antonio Moreira Rodrigues,da Silva, Ricar Korean Academy of Oral and Maxillofacial Radiology 2021 Imaging Science in Dentistry Vol.51 No.3

Purpose: Using images in the facial image comparison process poses a challenge for forensic experts due to limitations such as the presence of facial expressions. The aims of this study were to analyze how morphometric changes in the face during a spontaneous smile influence the facial image comparison process and to evaluate the reproducibility of measurements obtained by digital stereophotogrammetry in these situations. Materials and Methods: Three examiners used digital stereophotogrammetry to obtain 3-dimensional images of the faces of 10 female participants(aged between 23 and 45 years). Photographs of the participants' faces were captured with their faces at rest (group 1) and with a spontaneous smile (group 2), resulting in a total of 60 3-dimensional images. The digital stereophotogrammetry device obtained the images with a 3.5-ms capture time, which prevented undesirable movements of the participants. Linear measurements between facial landmarks were made, in units of millimeters, and the data were subjected to multivariate and univariate statistical analyses using Pirouette^® version 4.5 (InfoMetrix Inc., Woodinville, WA, USA) and Microsoft Excel^® (Microsoft Corp., Redmond, WA, USA), respectively. Results: The measurements that most strongly influenced the separation of the groups were related to the labial/buccal region. In general, the data showed low standard deviations, which differed by less than 10% from the measured mean values, demonstrating that the digital stereophotogrammetry technique was reproducible. Conclusion: The impact of spontaneous smiles on the facial image comparison process should be considered, and digital stereophotogrammetry provided good reproducibility.

Tomographic sagittal root position in relation to maxillary anterior bone housing in a Brazilian population

Rodrigues Diogo Moreira,Petersen Rodrigo Lima,Montez Caroline,Barboza Eliane Porto 대한영상치의학회 2022 Imaging Science in Dentistry Vol.52 No.1

Purpose: This cross-sectional study evaluated and categorized the tomographic sagittal root position (SRP) of the maxillary anterior teeth in a Brazilian population. Materials and Methods: Cone-beam computed tomographic scans of 420 maxillary anterior teeth of 70 patients (35 men and 35 women, mean age 25.2±5.9 years) were evaluated. The SRP was classified as class I, II, III, or IV. In class I, the root is positioned against the buccal cortical plate; in class II, the root is centered in the middle of the alveolar housing; in class III, the root is positioned against the palatal cortical plate; and in class IV, at least two-thirds of the root engage both the buccal and palatal cortical plates. Results: In total, 274 teeth (65.2%) were class I, 39 (9.3%) were class II, 3 (0.7%) were class III, and 104 (24.8%) were class IV. The frequency distribution over the teeth groups was different from the overall analysis. Important differences were found in the frequencies of classes I, II, and IV compared to other populations. Sex was not associated with the SRP classes (P= 0.307). Age distribution was significantly different over the classes (P= 0.004). Conclusion: The findings of this study on the distribution of SRP classes among the Brazilian population compared to other populations demonstrate that the SRP should be analyzed on a case-by-case basis for an accurate treatment plan in the maxillary anterior area.

Comparative analysis of bond strength to root dentin and compression of bioceramic cements used in regenerative endodontic procedures

Rodrigues Maykely Naara Morais,Bruno Kely Firmino,Alencar Ana Helena Gonçalves de,Silva Julyana Dumas Santos,Siqueira Patrícia Correia de,Decurcio Daniel de Almeida,Estrela Carlos 대한치과보존학회 2021 Restorative Dentistry & Endodontics Vol.46 No.4

Objectives This study compared the Biodentine, MTA Repair HP, and Bio-C Repair bioceramics in terms of bond strength to dentin, failure mode, and compression. Materials and Methods Fifty-four slices obtained from the cervical third of 18 single-rooted human mandibular premolars were randomly distributed (n = 18). After insertion of the bioceramic materials, the push-out test was performed. The failure mode was analyzed using stereomicroscopy. Another set of cylindrically-shaped bioceramic samples (n = 10) was prepared for compressive strength testing. The normality of data distribution was analyzed using the Shapiro-Wilk test. The Kruskal-Wallis and Friedman tests were used for the push-out test data, while compressive strength was analyzed with analysis of variance and the Tukey test, considering a significance level of 0.05. Results Biodentine presented a higher median bond strength value (14.79 MPa) than MTA Repair HP (8.84 MPa) and Bio-C Repair (3.48 MPa), with a significant difference only between Biodentine and Bio-C Repair. In the Biodentine group, the most frequent failure mode was mixed (61%), while in the MTA Repair HP and Bio-C Repair groups, it was adhesive (94% and 72%, respectively). Biodentine showed greater resistance to compression (29.59 ± 8.47 MPa) than MTA Repair HP (18.68 ± 7.40 MPa) and Bio-C Repair (19.96 ± 3.96 MPa) (p < 0.05). Conclusions Biodentine showed greater compressive strength than MTA Repair HP and Bio-C Repair, and greater bond strength than Bio-C Repair. The most frequent failure mode of Biodentine was mixed, while that of MTA Repair HP and Bio-C Repair was adhesive. Objectives This study compared the Biodentine, MTA Repair HP, and Bio-C Repair bioceramics in terms of bond strength to dentin, failure mode, and compression. Materials and Methods Fifty-four slices obtained from the cervical third of 18 single-rooted human mandibular premolars were randomly distributed (n = 18). After insertion of the bioceramic materials, the push-out test was performed. The failure mode was analyzed using stereomicroscopy. Another set of cylindrically-shaped bioceramic samples (n = 10) was prepared for compressive strength testing. The normality of data distribution was analyzed using the Shapiro-Wilk test. The Kruskal-Wallis and Friedman tests were used for the push-out test data, while compressive strength was analyzed with analysis of variance and the Tukey test, considering a significance level of 0.05. Results Biodentine presented a higher median bond strength value (14.79 MPa) than MTA Repair HP (8.84 MPa) and Bio-C Repair (3.48 MPa), with a significant difference only between Biodentine and Bio-C Repair. In the Biodentine group, the most frequent failure mode was mixed (61%), while in the MTA Repair HP and Bio-C Repair groups, it was adhesive (94% and 72%, respectively). Biodentine showed greater resistance to compression (29.59 ± 8.47 MPa) than MTA Repair HP (18.68 ± 7.40 MPa) and Bio-C Repair (19.96 ± 3.96 MPa) (p < 0.05). Conclusions Biodentine showed greater compressive strength than MTA Repair HP and Bio-C Repair, and greater bond strength than Bio-C Repair. The most frequent failure mode of Biodentine was mixed, while that of MTA Repair HP and Bio-C Repair was adhesive.

A Randomized Phase 3 Trial Comparing Pemetrexed/Carboplatin and Docetaxel/Carboplatin as First-Line Treatment for Advanced, Nonsquamous Non-small Cell Lung Cancer

Rodrigues-Pereira, José,Kim, Joo-Hang,Magallanes, Manuel,Lee, Dae Ho,Wang, Jie,Ganju, Vinod,Martí,nez-Barrera, Luis,Barraclough, Helen,van Kooten, Maximiliano,Orlando, Mauro Elsevier 2011 Journal of thoracic oncology Vol.6 No.11

Rapid thermal annealing induced modification in structural and electronic structure properties of Ti_0.95Co_0.05O_2@?δ thin films

Rodrigues, E.C.,Sharma, S.K.,de Menezes, A.S.,Chae, K.H.,Gautam, S.,Aljawf, R.N.,Kumar, S. Pergamon Press 2016 Materials research bulletin Vol.83 No.-

Thin film of Ti<SUB>0.95</SUB>Co<SUB>0.05</SUB>O<SUB>2-δ</SUB> was deposited on Si (100) using PLD method and annealed in O<SUB>2</SUB> and N<SUB>2</SUB> environment. Raman spectra confirm that all the films have rutile structure. Surface morphology indicates that the surface roughness and grain size increase with annealing. The electronic structure studied by NEXAFS spectroscopy at O K, Ti L<SUB>3,2</SUB> and Co L<SUB>3,2</SUB>-edges revealed that peak intensities decrease significantly for the film annealed N<SUB>2</SUB> environment. The ligand-field splitting estimated from the energy difference between the t<SUB>2g</SUB> and e<SUB>g</SUB> features in O K-edge spectra were 2.71eV for as-deposited and O<SUB>2</SUB> annealed film, whereas reduced more than double (@?1.32eV) for the film annealed in N<SUB>2</SUB>. Atomic multiplet calculations and experimentally observed NEXAFS spectra at Co L<SUB>3,2</SUB>-edge and Ti L<SUB>3,2</SUB>-edge confirm that Co present in 2+ and Ti in +4 valence state, whereas the multiplet structures of O<SUB>2</SUB> annealed film looks similar to Co metal.

Computational study of the wind load on a free-form complex thin shell structure

Rodrigues, A. Moret,Tome, Ana,Gomes, M. Gloria Techno-Press 2017 Wind and Structures, An International Journal (WAS Vol.25 No.2

The accelerated development of new materials, technologies and construction processes, in parallel with advances in computational algorithms and ever growing computational power, is leading to more daring and innovative architectural and structural designs. The search for non-regular building shapes and slender structures, as alternative to the traditional architectural forms that have been prevailing in the building sector, poses important engineering challenges in the assessment of the strength and mechanical stability of non-conventional structures and systems, namely against highly variable actions as wind and seismic forces. In case of complex structures, laboratory experiments are a widely used methodology for strength assessment and loading characterization. Nevertheless, powerful numerical tools providing reliable results are also available today and able to compete with the experimental approach. In this paper the wind action on a free-form complex thin shell is investigated through 3D-CFD simulation in terms of the pressure coefficients and global forces generated. All the modelling aspects and calibrating process are described. The results obtained showed that the CFD technique is effective in the study of the wind effects on complex-shaped structures.

Boundary Conditions and Fire Behavior of Concrete Filled Tubular Composite Columns

Rodrigues, Joao Paulo C.,Correia, Antonio J.M.,Kodur, Venkatesh Council on Tall Building and Urban Habitat Korea 2018 International journal of high-rise buildings Vol.7 No.4

Concrete-filled steel tubular (CFST) members are commonly used as composite columns in modern construction. However, the current guidelines for members' fire design (EN1994-1-2) have been proved to be unsafe in case the relative slenderness is higher than 0.5. In addition, the simplified design methods of Eurocode 4 are limited to circular and square CFST columns, while in practice columns with rectangular and elliptical hollow sections are being increasingly used because of their architectural aesthetics. In the last years a large experimental research has been carried out at Coimbra University on the topic. They have been tested concrete filled circular, square, rectangular and elliptical hollow columns with restrained thermal elongation. Some parameters such as the slenderness, the type of cross-section geometry as well as the axial and rotational restraint of the surrounding structure to the column have been tested in order to evaluate their influence on the fire resistance of such columns. In this paper it is evaluated the influence of the boundary conditions (pin-ended and semi-rigid end-support conditions) on the behavior of the columns in case of fire. In these tests it could not be seen a marked effect of the tested boundary conditions but it is believed that the increasing of rotational stiffness increases the fire resistance of the columns.

Genetic parameters for worm resistance in Santa Inês sheep using the Bayesian animal model

Rodrigues, Francelino Neiva,Sarmento, Jose Lindenberg Rocha,Leal, Tania Maria,de Araujo, Adriana Mello,Filho, Luiz Antonio Silva Figueiredo Asian Australasian Association of Animal Productio 2021 Animal Bioscience Vol.34 No.2

Objective: The objective of this study was to estimate the genetic parameters for worm resistance (WR) and associated characteristics, using the linear-threshold animal model via Bayesian inference in single- and multiple-trait analyses. Methods: Data were collected from a herd of Santa Inês breed sheep. All information was collected with animals submitted to natural contamination conditions. All data (number of eggs per gram of feces [FEC], Famacha score [FS], body condition score [BCS], and hematocrit [HCT]) were collected on the same day. The animals were weighed individually on the day after collection (after 12-h fasting). The WR trait was defined by the multivariate cluster analysis, using the FEC, HCT, BCS, and FS of material collected from naturally infected sheep of the Santa Inês breed. The variance components and genetic parameters for the WR, FEC, HCT, BCS, and FS traits were estimated using the Bayesian inference under the linear and threshold animal model. Results: A low magnitude was obtained for repeatability of worm-related traits. The mean values estimated for heritability were of low-to-high (0.05 to 0.88) magnitude. The FEC, HCT, BCS, FS, and body weight traits showed higher heritability (although low magnitude) in the multiple-trait model due to increased information about traits. All WR characters showed a significant genetic correlation, and heritability estimates ranged from low (0.44; single-trait model) to high (0.88; multiple-trait model). Conclusion: Therefore, we suggest that FS be included as a criterion of ovine genetic selection for endoparasite resistance using the trait defined by multivariate cluster analysis, as it will provide greater genetic gains when compared to any single trait. In addition, its measurement is easy and inexpensive, exhibiting greater heritability and repeatability and a high genetic correlation with the trait of resistance to worms.

The Cultural Context of Plagiarism and Research Misconduct in the Asian Region

Rodrigues Flinta,Gupta Prakash,Khan Afzal Parvez,Chatterjee Tulika,Sandhu Nimrat Kaur,Gupta Latika 대한의학회 2023 Journal of Korean medical science Vol.38 No.12

Plagiarism is one of the most frequent forms of research misconduct in South and East Asian countries. This narrative review examines the factors contributing to research misconduct, emphasizing plagiarism, particularly in South, East and Southeast Asian countries. We conducted a PubMed and Scopus search using the terms plagiarism, Asia, South Asia, East Asia, Southeast Asia, research misconduct and retractions in January of 2022. Articles with missing abstracts, incomplete information about plagiarism, publication dates before 2010, and those unrelated to South, East, and Southeast Asian countries were excluded. The retraction watch database was searched for articles retracted between 9th January 2020 to 9th January 2022. A total of 159 articles were identified, of which 21 were included in the study using the database search criteria mentioned above. The review of articles identified a lack of training in scientific writing and research ethics, publication pressure, permissive attitudes, and inadequate regulatory measures as the primary reasons behind research misconduct in scientific publications. Plagiarism remains a common cause of unethical publications and retractions in regions of Asia (namely South, East and Southeast). Researchers lack training in scientific writing, and substantial gaps exist in understanding various forms of plagiarism, which heavily contribute to the problem. There is an urgent need to foster high research ethics standards and adhere to journal policies. Providing appropriate training in scientific writing among researchers may help improve the knowledge of different types of plagiarism and promote the use of antiplagiarism software, leading to a substantial reduction in the problem.

Kinetic and Energetic Parameters of Carob Wastes Fermentation by Saccharomyces cerevisiae: Crabtree Effect, Ethanol Toxicity, and Invertase Repression

Rodrigues, B.,Peinado, J.M.,Raposo, S.,Constantino, A.,Quintas, C.,Lima-Costa, M.E. The Korean Society for Microbiology and Biotechnol 2015 Journal of microbiology and biotechnology Vol.25 No.6

Carob waste is a useful raw material for the second-generation ethanol because 50% of its dry weight is sucrose, glucose, and fructose. To optimize the process, we have studied the influence of the initial concentration of sugars on the fermentation performance of Saccharomyces cerevisiae. With initial sugar concentrations (S₀ ) of 20 g/l, the yeasts were derepressed and the ethanol produced during the exponential phase was consumed in a diauxic phase. The rate of ethanol consumption decreased with increasing S₀ and disappeared at 250 g/l when the Crabtree effect was complete and almost all the sugar consumed was transformed into ethanol with a yield factor of 0.42 g/g. Sucrose hydrolysis was delayed at high S₀ because of glucose repression of invertase synthesis, which was triggered at concentrations above 40 g/l. At S₀ higher than 250 g/l, even when glucose had been exhausted, sucrose was hydrolyzed very slowly, probably due to an inhibition at this low water activity. Although with lower metabolic rates and longer times of fermentation, 250 g/l is considered the optimal initial concentration because it avoids the diauxic consumption of ethanol and maintains enough invertase activity to consume all the sucrose, and also avoids the inhibitions due to lower water activities at higher S₀ .