Preparation of AgCl/Ag₃PO₄/Diatomite Composite by Microemulsion Method for Rapid Photo-Degradation of Rhodamine B with Stability under Visible Light

Zhu, Hai-Tao,Ren, Qi-Fang,Jin, Zhen,Ding, Yi,Liu, Xin-Yu,Ni, Xi-Hui,Han, Meng-Li,Ma, Shi-Yu,Ye, Qing,Oh, Won-Chun Materials Research Society of Korea 2020 한국재료학회지 Vol.30 No.8

In this paper, AgCl/Ag₃PO₄/diatomite photocatalyst is successfully synthesized by microemulsion method and anion in situ substitution method. X-ray diffraction (XRD), photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and ultraviolet-visible spectroscopy (UV-Vis) are used to study the structural and physicochemical characteristics of the AgCl/Ag₃PO₄/diatomite composite. Using rhodamine B (RhB) as a simulated pollutant, the photocatalytic activity and stability of the AgCl/Ag₃PO₄/diatomite composite under visible light are evaluated. In the AgCl/Ag₃PO₄/diatomite visible light system, RhB is nearly 100 % degraded within 15 minutes. And, after five cycles of operation, the photocatalytic activity of AgCl/Ag₃PO₄/diatomite remains at 95 % of the original level, much higher than that of pure Ag₃PO₄ (40 %). In addition, the mechanism of enhanced catalytic performance is discussed. The high photocatalytic performance of AgCl/Ag₃PO₄/diatomite composites can be attributed to the synergistic effect of Ag₃PO₄, diatomite and AgCl nanoparticles. Free radical trapping experiments are used to show that holes and oxygen are the main active species. This material can quickly react with dye molecules adsorbed on the surface of diatomite to degrade RhB dye to CO₂ and H₂O. Even more remarkably, AgCl/Ag₃PO₄/diatomite can maintain above 95 % photo-degradation activity after five cycles.

Management of Primary Hepatic Tuberculosis: A Single Center Experience

( Xin Long ),( Lei Zhang ),( Jianping Zhao ),( Qi Cheng ),( Peng Zhu ),( Zhu Chen ),( Zhiyong Huang ),( Xiaoping Chen ) 대한간학회 2020 춘·추계 학술대회 (KASL) Vol.2020 No.1

Aims: Primary hepatic tuberculosis is a rare benign disease, without typical manifestation and specific test, which usually contribute to the misdiagnosis of the disease. Therefore, we reviewed eleven cases of primary hepatic tuberculosis in our medical center, in order to find the common features, which might be conductive to improve the diagnostic accuracy of the disease. Methods: Eleven cases of hepatic tuberculosis confirmed by histopathological examination from 2012 to 2017, were collected in our hospital. Clinical features and outcomes were retrospectively analyzed. Results: All the patients were in good condition at admission, including seven male and four female, aging from 18 to 66 years (average 42.7 years). They disclaimed history of pulmonary and any extra-pulmonary tuberculosis. Tumor markers including AFP, CA19-9 and CEA were within the normal range. All the patients, with liver function classified as Child Pugh A, showed no signs of infection. The lesions were presented as hypo-echoic, cystic or solid-cystic in ultrasonography, low density with periphery enhancement on CT scan, and mixed signals on MRI. Two patients were initially diagnosed as liver cancer, two as liver benign tumor, three as hilar tumor, two as liver abscess, and one as others. Five cases underwent partial hepatectomy, two received laparotomy and drainage of the abscess, two experienced laparotomy and liver biopsy, and two with percutaneous needle biopsy. All recovered well after the operation, subsequently received regular treatment of anti-tuberculosis, and completely cured for hepatic tuberculosis. Conclusions: Surgical intervention is an effective way to clarify the diagnosis of asymptomatic primary hepatic tuberculosis.

A DoS Detection Method Based on Composition Self-Similarity

( Zhu Jian-qi ),( Fu Feng ),( Chong-kwon Kim ),( Yin Ke-xin ),( Liu Yan-heng ) 한국인터넷정보학회 2012 KSII Transactions on Internet and Information Syst Vol.6 No.5

Based on the theory of local-world network, the composition self-similarity (CSS) of network traffic is presented for the first time in this paper for the study of DoS detection. We propose the concept of composition distribution graph and design the relative operations. The (R/S)d algorithm is designed for calculating the Hurst parameter. Based on composition distribution graph and Kullback Leibler (KL) divergence, we propose the composition self-similarity anomaly detection (CSSD) method for the detection of DoS attacks. We evaluate the effectiveness of the proposed method. Compared to other entropy based anomaly detection methods, our method is more accurate and with higher sensitivity in the detection of DoS attacks.

An improved SCGM(1,m) model for multi-point deformation analysis

Qi-jie Wang,Chang-cheng Wang,Rong-an Xie,Xin-qing Zhang,Jian-jun Zhu 한국지질과학협의회 2014 Geosciences Journal Vol.18 No.4

Considering the deformation of discrete monitoringpoints within the same deformable body usually have similar physicalproperties and tend to undergoing identical dynamic process, jointmodelling of the deformation processes of these points in time domainare expected to generate better results. Yin et al. (1997) first extendedthe multi-variable grey model-system cloud grey model SCGM(1,m),with obviously superior modelling mechanism than single-variablegrey model, to multi-point deformation modelling. However, thismodel is still not widely recognized and its applications remain verylimited in the field of deformation analysis. The objective of this studyis to demonstrate the capability of the SCGM(1,m) model, to presenttwo revisions to further improve the performance of the model andto draw more attention to the community of deformation analysis. We first introduce the principles of the SCGM(1,m) model in theanalysis and prediction of deformation surveys. Two practicaltechniques, namely residuals re-modelling and linear regressionadjustment, are then presented to improve the SCGM(1,m) model. Combined with slope monitoring data, the modelling with the originaland the improved SCGM(1,m) models by residuals re-modellingand linear regression adjustment are illustrated. The mean relativeprediction errors decrease from 5.89% to 3.54% and 2.69%, whenthe two refining techniques are applied, respectively, indicating relativeimprovements of 39.9% and 54.3%.

Analysis of the Genome Sequence of Strain GiC-126 of Gloeostereum incarnatum with Genetic Linkage Map

( Wan-zhu Jiang ),( Fang-jie Yao ),( Ming Fang ),( Li-xin Lu ),( You-min Zhang ),( Peng Wang ),( Jing-jing Meng ),( Jia Lu ),( Xiao-xu Ma ),( Qi He ),( Kai-sheng Shao ),( Asif Ali Khan ),( Yun-hui Wei 한국균학회 2021 Mycobiology Vol.49 No.4

Gloeostereum incarnatum has edible and medicinal value and was first cultivated and domesticated in China. We sequenced the G. incarnatum monokaryotic strain GiC-126 on an Illumina HiSeq X Ten system and obtained a 34.52-Mb genome assembly sequence that encoded 16,895 predicted genes. We combined the GiC-126 genome with the published genome of G. incarnatum strain CCMJ2665 to construct a genetic linkage map (GiC-126 genome) that had 10 linkage groups (LGs), and the 15 assembly sequences of CCMJ2665 were integrated into 8 LGs. We identified 1912 simple sequence repeat (SSR) loci and detected 700 genes containing 768 SSRs in the genome; 65 and 100 of them were annotated with gene ontology (GO) terms and KEGG pathways, respectively. Carbohydrate-active enzymes (CAZymes) were identified in 20 fungal genomes and annotated; among them, 144 CAZymes were annotated in the GiC-126 genome. The A mating-type locus (MAT-A) of G. incarnatum was located on scaffold885 at 38.9 cM of LG1 and was flanked by two homeodomain (HD1) genes, mip and beta-fg. Fourteen segregation distortion markers were detected in the genetic linkage map, all of which were skewed toward the parent GiC-126. They formed three segregation distortion regions (SDR1-SDR3), and 22 predictive genes were found in scaffold1920 where three segregation distortion markers were located in SDR1. In this study, we corrected and updated the genomic information of G. incarnatum. Our results will provide a theoretical basis for fine gene mapping, functional gene cloning, and genetic breeding the follow-up of G. incarnatum.

Performance Analysis of Cellular Networks with D2D communication Based on Queuing Theory Model

( Jianfang Xin ),( Qi Zhu ),( Guangjun Liang ),( Tiaojiao Zhang ),( Su Zhao ) 한국인터넷정보학회 2018 KSII Transactions on Internet and Information Syst Vol.12 No.6

In this paper, we develop a spatiotemporal model to analysis of cellular user in underlay D2D communication by using stochastic geometry and queuing theory. Firstly, by exploring stochastic geometry to model the user locations, we derive the probability that the SINR of cellular user in a predefined interval, which constrains the corresponding transmission rate of cellular user. Secondly, in contrast to the previous studies with full traffic models, we employ queueing theory to evaluate the performance parameters of dynamic traffic model and formulate the cellular user transmission mechanism as a M/G/1 queuing model. In the derivation, Embedded Markov chain is introduced to depict the stationary distribution of cellular user queue status. Thirdly, the expressions of performance metrics in terms of mean queue length, mean throughput, mean delay and mean dropping probability are obtained, respectively. Simulation results show the validity and rationality of the theoretical analysis under different channel conditions.

Full-scale testing and modeling of the mechanical behavior of shield TBM tunnel joints

Wen-qi Ding,Yi-cheng Peng,Zhi-guo Yan,Bi-wei Shen,He-hua Zhu,Xin-xin Wei 국제구조공학회 2013 Structural Engineering and Mechanics, An Int'l Jou Vol.45 No.3

For shield TBM (Tunnel Boring Machine) tunnel lining, the segment joint is the most critical component for determining the mechanical response of the complete lining ring. To investigate the mechanical behavior of the segment joint in a water conveyance tunnel, which is different from the vehicle tunnel because of the external loads and the high internal water pressure during the tunnel’s service life, full-scale joint tests were conducted. The main advantage of the joint tests over previous ones was the definiteness of the loads applied to the joints using a unique testing facility and the acquisition of the mechanical behavior of actual joints. Furthermore, based on the test results and the theoretical analysis, a mechanical model of segment joints has been proposed, which consists of all important influencing factors,including the elastic-plastic behavior of concrete, the pre-tightening force of the bolts and the deformations of all joint components, i.e., concrete blocks, bolts and cast iron panels. Finally, the proposed mechanical model of segment joints has been verified by the aforementioned full-scale joint tests.

Full-scale testing and modeling of the mechanical behavior of shield TBM tunnel joints

Ding, Wen-Qi,Peng, Yi-Cheng,Yan, Zhi-Guo,Shen, Bi-Wei,Zhu, He-Hua,Wei, Xin-Xin Techno-Press 2013 Structural Engineering and Mechanics, An Int'l Jou Vol.45 No.3

For shield TBM (Tunnel Boring Machine) tunnel lining, the segment joint is the most critical component for determining the mechanical response of the complete lining ring. To investigate the mechanical behavior of the segment joint in a water conveyance tunnel, which is different from the vehicle tunnel because of the external loads and the high internal water pressure during the tunnel's service life, full-scale joint tests were conducted. The main advantage of the joint tests over previous ones was the definiteness of the loads applied to the joints using a unique testing facility and the acquisition of the mechanical behavior of actual joints. Furthermore, based on the test results and the theoretical analysis, a mechanical model of segment joints has been proposed, which consists of all important influencing factors, including the elastic-plastic behavior of concrete, the pre-tightening force of the bolts and the deformations of all joint components, i.e., concrete blocks, bolts and cast iron panels. Finally, the proposed mechanical model of segment joints has been verified by the aforementioned full-scale joint tests.

Joint Resource Allocation Scheme for OFDM Wireless-Powered Cooperative Communication Networks

( Guangjun Liang ),( Qi Zhu ),( Jianfang Xin ),( Ziyu Pan ) 한국인터넷정보학회 2017 KSII Transactions on Internet and Information Syst Vol.11 No.3

Energy harvesting techniques, particularly radio frequency energy harvesting (RF-EH) techniques, which are known to provide feasible solutions to enhance the performance of energy constrained wireless communication systems, have gained increasing attention. In this paper, we consider a wireless-powered cooperative communication network (WPCCN) for transferring energy in the downlink and forwarding signals in the uplink. The objective is to maximize the average transmission rate of the system, subject to the total network power constraint. We formulate such a problem as a form of wireless energy transmission based on resource allocation that searches for the joint subcarrier pairing and the time and power allocation, and this can be solved by using a dual approach. Simulation results show that the proposed joint optimal scheme can efficiently improve system performance with an increase in the number of subcarriers and relays.

Genetic linkage map construction and quantitative trait loci mapping of agronomic traits in Gloeostereum incarnatum

Jiang Wan-Zhu,Yao Fang-Jie,Lu Li-Xin,Fang Ming,Wang Peng,Zhang You-Min,Meng Jing-Jing,Lu Jia,Ma Xiao-Xu,He Qi,Shao Kai-Sheng 한국미생물학회 2021 The journal of microbiology Vol.59 No.1

Gloeostereum incarnatum is an edible medicinal mushroom widely grown in China. Using the whole genome of G. incarnatum, simple sequence repeat (SSR) markers were developed and synthetic primers were designed to construct its first genetic linkage map. The 1,048.6 cm map is composed of 10 linkage groups and contains 183 SSR markers. In total, 112 genome assembly sequences were anchored, representing 16.43 Mb and covering 46.41% of the genome. Selfing populations were used for quantitative trait loci (QTL) targeting, and the composite interval mapping method was used to co-localize the mycelium growth rate (potato dextrose agar and sawdust), growth period, yield and fruiting body length, and width and thickness. The 14 QTLs of agronomic traits had LOD values of 3.20–6.51 and contribution rates of 2.22– 13.18%. No linkage relationship was found between the mycelium growth rate and the growth period, but a linkage relationship was observed among the length, width and thickness of the fruiting bodies. Using NCBI’s BLAST alignment, the genomic sequences corresponding to the QTL regions were compared, and a TPR-like protein candidate gene was selected. Using whole-genome data, 138 candidate genes were found in four sequence fragments of two SSR markers located in the same scaffold. The genetic map and QTLs established in this study will aid in developing selective markers for agronomic traits and identifying corresponding genes, thereby providing a scientific basis for the further gene mapping of quantitative traits and the marker-assisted selection of functional genes in G. incarnatum breeding programs.