정안침요법(整顔鍼療法)을 응용하여 호전된 후천성 사경환자 치험 2례

박서영,김재수,홍의재,이윤경,이봉효,임성철,정태영,이경민,Park, Seo-Young,Kim, Jae-Su,Hong, Eui-Jae,Lee, Yoon-Kyoung,Lee, Bong-Hyo,Lim, Seong-Chul,Jung, Tae-Young,Lee, Kyung-Min 대한침구의학회 2008 대한침구의학회지 Vol.25 No.4

Objectives : This report intended to estimate effects of Jung-an acupuncture on the acquired torticollis caused by muscle contraction. Methods : The patients were treated by Jung-an acupuncture, herb medication and Physical treatment daily. The improvement of the patients was judged by Toronto Western Spasmodic Torticollis Rating Scale(TWSTRS), Tsui's score and Visual Analogue Scale(VAS). Results : After 7 days of treatment, the 2 patients' neck pain and cervical movement were improved. Also, TWSTRS score, Tsui's score and VAS were all reduced. Conclusions : As the Jung-an acupuncture's theological base is organized with meridian theory and myofacial release therapy, We considered the Jung-an acupuncture is effective not only for the skin disease but also for the muscle problem such as torticollis.

Feedforward Backpropagation Neural Network을 이용한 척추질환 환자의 진단에 관한 연구

홍정의 한국교통대학교 2016 한국교통대학교 논문집 Vol.51 No.-

Artificial neural network can be used as a diagnosis and predictive method for analyzing patterns in multivariate cases. The goal of this study is diagnosis of the spondylolisthesis from biomedical data that is derived from the shape and orientation of the pelvis and lumbar spine. The data set has six attributes including pelvic incidence, pelvic tilt, lumbar lordosis angle, sacral slope, pelvic radius and grade of spondylolisthesis and two class including normal and abnormal. From University of California at Irvine machine learning repository, 100 normal and 150 spondylolisthesis patient’s data were used for this study. Backpropagation neural network, diagnosis used for diagnosis fo spondylisthesis and the results were described in this paper.

사출성형 가공공정의 최적 가공조건 선정에 관한 비교연구

홍정의 忠州大學校 2003 한국교통대학교 논문집 Vol.38 No.4

Defining the relationship between the quality of injection molded parts and the process condition is very complicate because of lots of factor are involved and each factor has a non-linearity. With the development of CAE(Computer Aided Engineering) technology, the estimation of volumetric shrinkage of injection mold parts is possible by computer simulation even though restricted application. In this research, the Taguchi method and Neural Network applied for finding optimal processing condition. And Neural network applied for investigating optimum condition within factor level. The results of three different approach compared looking for the best condition.

최적 절삭조건 선정에 관한 실험계획법과 인공지능 방법에 대한 비교 연구

洪政儀 忠州大學校 1999 한국교통대학교 논문집 Vol.34 No.1

In process planning or NC part programming optimal cutting condition is to be determined using reliable mathematical models representing the machining conditions of a particular work-tool combination. The development of such mathematical model requires detailed planning and proper analysis of experiments. The neural network was used for estimating tool life, cutting force and cutting power and compared to traditional statistical method. Test results are graphically illustrated.

실험 데이타의 크기가 다구찌 방법을 이용한 최적설계 시 설계능력에 미치는 영향에 대한 연구

홍정의 忠州大學校 2004 한국교통대학교 논문집 Vol.39 No.1

Selecting optimum condition is not easy problem for product design or manufacturing process design. Specially in the case of the quality of parts is not uniform and the frequent noise caused by uncertainty of environment, it is impossible selecting optimum product and manufacturing process design without experimental design method. Experimental design is very important role solving this kind of problems. The goal of experimental design is minimizing the noise of environment so achieving the robustness of product and process. In this research, the effect of experiment data size analyzed in case of Taguchi method. With three different data size, the ability of selecting optimum condition compared respectively.

Taguchi Method에 의한 와이어 컷팅 가공 공정의 최적조건 선정에 관한 연구

洪政儀 충주대 2001 한국교통대학교 논문집 Vol.36 No.1

This paper presents a solution of a multi-objective optimization problem for the selection of the best control combination setting on a wire electrical discharge machine by Taguchi Method.The performance of WEDM process can be presented material removal rate.With the L18 Orthogonal array experimental data, S/N ratio of each experimental set is calculated.With the larger- the-better characteristics, large S/N ratio means good material removal rate.

남극지역의 대기오염 측정체계 구축을 위한 기초조사

정의석,김선태,김선규,홍성민,정호성 大田大學校 環境問題硏究所 2002 환경문제연구소 논문집 Vol.6 No.-

From January through February 2000, the SO_2. NO_2, and VOCs (Volatile organic compounds) concentrations were measured at the total 15 sites (between 6213S and 6214S, between 5846W and 5848W) around the King Sejong Station located in King George Island. The badge type of SO_2 and NO_2 passive diffusion samplers impregnated with 5% Na_2CO_3 and TEA, respectively and VOC passive samplers including activated carbon filter were used. The samplers brought back to the laboratory were analyzed with IC or GC after extracting by distilled pure water, H_2O_2, or CS_2. Considering that the concentration level of each compound analyzed are very low in Antarctica, the blanks and instrumental detection limits were also determined. The blanks of SO_2 and NO_2 sampler were found to be 0.63 ppb and 0.49 ppb, respectively. Measured concentrations range from <LOD to 1.58 ppb for NO_2 and from <LOD to 0.44 ppb for SO_2. For ten species of VOCs investigated, on the other hand, most of compounds except for toluene and benzene could not be detected because of extremely low concentrations below the instrumental detection limits. Measured concentrations range from <LOD to 0.96ppb for toluene and from <LOD to 0.22 ppb for benzene. Although the concentrations of most gaseous contaminants investigated are observed to be very low, our results clearly show that anthropogenic emissions at King Sejong Station affect the concentrations of several of these compounds. The limited but valuable data presented in this study will be helpful to establish the systematic air monitoring system in the near future.

멀티미디어 인터넷 교육을 위한 최신 기술에 대한 연구

洪政儀 충주대 산업과학기술연구소 2000 産業科學論文集 Vol.8 No.-

Transmitting voice and image via internet is very important technology for internet distance learning and there are only small amount of internet contents using this technology. But the internet transmission speed is still cannot afford the customer need, and the CODEC technology which compressing and extracting image and voice is not practically used, there are a little contents using this technology in the area of distance learning. The CODEC algorithm that have high compression ratio had already developed, but it is not enough to offer software only. It is disscused the expansion process of MPEG which is fundametals of voice and image compression and the technological characteristics and pros and cons of comercial software Real Player and Media Player which using MPEG.

수시 학생부 교과전형에서의 수능최저등급 완화 방안에 대한 연구

홍정의,허민규 한국교통대학교 2015 한국교통대학교 논문집 Vol.50 No.-

The goal of this study is analyze the relationship between student high school grade and university academic achievement also Scholastic Ability Test score and university academic achievement. Department of Education continuously asked reduce the types of admission and mitigate admission restriction. For the purpose of simplify university admission process, we need to mitigate or remove the minimum standard of SAT score. At this research, analyzed the effects of mitigating minimum SAT score and suggested possible solution

The Effects of Experiment Size For Designing Four-Bar Linkage Using Artificial Neural Networks And The Taguchi Method

洪政儀 忠州大學校 1997 한국교통대학교 논문집 Vol.32 No.1

기계장치의 메커니즘은 외부로부터의 힘을 유용하게 힘이 필요한 곳에 전달하는데에 그 목적이 있다. 기규로들은 개방형 또는 폐쇄형의 형태를 가지고 있는 조인트로 연결되어 있으며 여러 개의 링크로 구성되어 있다. 이러한 기구류들은 비선형운동 같은 복잡한 운동을 수행하면서도 간단하게 디자인 되어 질 수 있기 때문에 많은 관심을 받아왔다. 간단한 예로서 세개의 움직이는 링크와 하나의 고정 링크로 구성되어 있는 Four-Bar Link를 들 수 있다. 동력원이 되는 링크를 입력 링크라 부르고, 외부 기기와 연결된 링크를 출력링크라고 한다. 이러한 Four-Bar Link는 그 디자인 어떻게 디자인 요소들을 결정하느냐에 따라 성능에 많은 영향을 미치는 것으로 알려져 있다. 다구찌 방법을 통해 효과적으로 자동차용 후드 메카니즘에 적용될 수 있는 최적의 디자인 조건을 결정할 수 있었고 또한 신경망 이론을 이용한 최적 조건과 비교하여 보았다. 아울러 신경망 이론을 이용한 실험 데이터의 크기에 따른 최적 조건선정치의 변화에 대해서도 언급하였다.