http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
東醫寶鑑 中 厚朴이 主藥으로 配伍된 方劑의 活用에 대한 考察
이재철,정명,임규상,윤용갑,Lee, Jaecheol,Jung, Myung,Lim, Kyusang,Yun, Yonggab 대한한의학방제학회 2015 大韓韓醫學方劑學會誌 Vol.23 No.1
This report describes the remedial fields, symptoms, pathology, dosage, prescriptional constitution of 40 prescriptions related to the use of Magnoliae Cortex main blended prescriptions from Dongeuibogam. The following conclusions were reached through investigations on the prescriptions that use Magnoliae Cortex as a key component. Prescriptions that Magnoliae Cortex was taken as a monarch drug are utilized for 13 therapeutic purposes, for example, abdominal dropsy, abdominal lump. In particular, 27.5% of the prescriptions appear in the chapter of abdominal dropsy. Prescriptions that utilize Magnoliae Cortex as the main ingredient are used in the treatment of abdominal lump, abdominal dropsy. Magnoliae Cortex is used in pathogenic factors such as cold, congestion of Qi and used in pathology related to digestive system. The dosage of Magnoliae Cortex is 2pun(about 0.75g) to 3don(about 11.25 g), however 1don(about 3.75g) has been taken the most for clinical application. Pyeongwisan is the most useful base prescription which use the Magnoliae Cortex as the main component.
프로니 분석을 이용한 주행 환경에서의 브레이크 래틀 소음 발생 특성 분석
이재철(Jaecheol Lee),곽윤상(Yunsang Kwak),박준홍(Junhong Park) 한국비파괴검사학회 2015 한국비파괴검사학회지 Vol.35 No.4
MoC(motor on caliper)를 이용한 자동차 브레이크 시스템이 장착되었을 때 도로 조건에 의해 발생하는 진동으로 래틀 소음 발생 가능성을 검증하기 위하여, 무향실에서 가진기(quiet shaker)를 이용하여 차량상태와 동일한 진동을 인가하면서 소음을 동시에 측정하여 실제 운행 중에 발생하는 MoC 래틀 소음을 재현하였다. 소음 발생 조건 및 원인을 파악하는 신호 처리 방법을 제안하였다. 원리 시험을 통해서 충돌되는 두 부품 간의 고유 진동수를 확인하고, 소음이 발생할 때의 음압/진동 신호의 임팩트성 소음에 대해 주파수 성분을 분석하여 소음 발생 빈도에 영향을 줄 수 있는 인자를 찾는 방법을 제안하였다. 더불어 래틀 소음을 분석하기 위한 FFT 주파수 분석을 실시하고 장단점을 분석하였으며, 단점을 보완하기 위한 프로니 분석 방법에 대해서 실제 두 가지 다른 브레이크 시스템의 내구 테스트 결과에 적용하여 효율성을 입증하였다. To verify the possibility of generating rattling noise from a motor on caliper brake system, a test was conducted using a caliper excited with vibrations similar to that in a vehicle running on actual roads; this test was conducted using a quiet shaker installed in an anechoic room. After several hours of external excitation, the test assembly was loosened, and the frequency of rattling noise generation increased. A microphone was used to record the generated noise. The measured signals were analyzed by conventional spectrum analysis. Since the noise is generated as an impact response, the advantages of employing Prony analysis was discussed, and the results were compared to those obtained using conventional fast Fourier transforms. The accuracy of Prony analysis was through endurance tests on different brake systems.
모바일하버용 컨테이너 자동 하역 장치의 컨테이너 운송 모듈 구조 설계
이재철(Jaecheol Lee),이재훈(Jae-Hoon Lee),천희준(Heejun Chun),박성훈(Seonghun Park) (사)한국CDE학회 2010 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2010 No.1
The objective of this study is to design a container transport module in the automated container-stacking system (ACSS) for Mobile Harbor (MH). The container transport module is designed to perform automated locking and unlocking of the landed containers on the module through an automated twist-lock as well as automated adjustments of the twist-lock to the variable sizes of containers, and further perform to move to the location of a spreader. Finite Element Method (FEM) of the designed container transport module showed that the largest von Mises stress was produced in the end of the container transport module with a value of 137MPa, and satisfied the allowable stress of a SM490Y material (243MPa) which was computed from the yield stress of a SM490Y material (365MPa) divided by a factor of safety (1.5). FEM results showed that the deflection of this module (7.4mm) was less than the allowable deflection (23mm) calculated by the length (12m) of the module divided by 600.
Geiger Muller Tube를 이용한 X-ray 감지기의 설계
이재철(Jaecheol Lee),고대식(Daesik Ko) 한국정보기술학회 2006 한국정보기술학회논문지 Vol.4 No.6
In this paper, a X-ray detector using Geiger Muller tube has been implemented and analyzed. The X-rat detector using Geiger tube gives some advantage ofsimple design and low cost implementation compare with other x-ray detection. Geiger Muller Tube principles has been studied and X-ray detector system using pulse shaper spurious, detection level clipping and A/D converting circuits has been constructed . In experimental results using weak X-rayand strong X-ray, it has been shown that designed X-ray detector can detect X-ray in air. We used X-ray, 40KVpp / 50mA/1000msec, as a weak X-ray, and 100KVpp / 320mA/320msec, as a strong X-ray. And designed X-ray detector also could process Digital X-ray signal by A/D converting and, it has been shown that we could count intensity of detected X-ray signal by using digital X-ray signal.
복합재료로 제작된 레저보트의 설계 정보 교환을 위한 현황 분석
이재철(Jaecheol Lee),오대균(Daekyun Oh),문두환(Duhwan Mun) (사)한국CDE학회 2013 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2013 No.8
레저보트의 건조 과정에서 설계와 인증을 위해서 다양한 도구와 시스템이 필요하나 레저보트 개발을 위한 통합 설계환경은 매우 열악한 실정이다. 우리나라와 같은 건조 중심의 레저보트 개발 환경에서는 설계 및 생산 시스템의 자동화가 중요한 요소이며 이를 위해서는 시스템 간의 데이터 상호운용성 확보가 반드시 필요하다. 이 논문에서는 복합재료로 제작된 레저보트의 설계 정보 교환을 위한 기초 연구로서 관련 산업 데이터 표준, 설계 자동화 시스템, 업무 단계별 복합재료 데이터 요구사항을 분석하였다.
연약지반 침하량 산정 시 UAV LiDAR 측량을 통한 수치표고모델 최적화에 대한 연구
이재철(JaeCheol Lee),김정현(JungHyun Kim),이기섭(KiSeop Lee),이동하(DongHa Lee) 대한공간정보학회 2024 한국공간정보학회 학술대회 Vol.2024 No.5
우리나라 국토의 지리적 특성상 연안 해역에서의 가호안 축조 후 준설토 매립을 통한 부지조성 공사가 증가하고 있다. 이렇게 조성된 부지는 장기간에 걸친 침하 발생으로 인한 다양한 공학적 문제를 야기시키므로 주기적인 침하량 계측이 필수적으로 수행된다. 현행의 연약지반 침하량 계측은 현장 작업자에 의한 계측기를 통해 수행되고 있으나, 데이터의 취득 방법 및 효용성 측면에서 경제적이고 효율적이지 못하다. 한편, 경제적이고 효율성 높은 3차원 공간정보 취득이 가능한 UAV(Unmanned Aerial Vehicle) LiDAR(Light Detection And Ranging)를 활용한 측량은 다양한 분야에서 활용되고 있으나 연약지반에서의 활용성 평가에 관한 연구는 미비한 실정이다. 따라서 본 연구에서는 준설토 매립을 통해 조성된 연약지반을 연구대상지로 선정하여 현장 계측기에 의한 침하량 성과와 UAV LiDAR 측량을 통해 취득한 데이터를 이용하여 다양한 보간법 및 격자 크기로 제작된 DEM(Digital Elevation Model)에 의한 침하량 산정값의 비교 및 분석을 통한 연약지반 침하량 산정 시 최적의 수치표고모델에 대한 연구를 수행하였다. 본 연구 결과 연약지반 침하량 산정을 위한 최적의 DEM 제작 방안을 제시하였으며, 이를 통해 연약지반에서의 침하량 산정 시 최적화된 DEM 활용을 통하여 기존의 현장 계측기에 의한 방법보다 경제적이고 효용적인 침하량 산정이 기대된다.