http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황기현(G. H. Hwang),장원태(W. T Jang),심현준(H. J. Sim),김상일(S. I. Kim),이대석(D. S. Lee) 한국멀티미디어학회 2006 한국멀티미디어학회 학술발표논문집 Vol.2006 No.1
본 논문에서는 Tag 신호를 IEEE 802.11 통신 프로토콜을 통해서 데이터 및 영상처리가 가능한 PXA255 ARM 칩을 내장한 임베디드 RFID Reader/Writer 시스템과 전송된 Tag 신호를 이용하여 D/B를 검색한 후 이를 IEEE 802.11 통신 프로토콜 통해서 임베디드 시스템에 전송하는 임베다드 RFID R/W 미들웨어를 개발하였다. 개발한 임베디드 형태의 RFID R/W 시스템은 PXA255 ARM칩을 중심으로 13.56Mhz의 RFID Reader/Writer 서버와 데이터 통신을 위한 무선랜 및 TIT-LCD로 구성되어 있다. 임베디드 RFID R/W 시스템은 Tag 신호를 시리얼단자로 통해 입력받으면 이를 무선랜을 이용하여 서버로 데이터를 전송하고 다시 서버로부터 처리된 결과 이미지 데이터를 받아서 TFT-LCD화면에 표시한다. 임베디드 RFID R/W 미들웨어는 RFID R/W 취득한 Tag 신호를 임베디드 시스템에 전송하고, 임베디드 시스템은 클라이언트 소켓 프로그램을 작동시켜 IEEE 802.11 통신 프로토콜을 통해 윈도우 서버에 접속한 후 Tag 신호를 전송한다.
노재엽(J Y Rho),장혁진(H J Jang),이정근(J G Lee),권기태(K T Kwon),이세현(S H Lee),신상욱(S W Shin),황명근(M K Hwang) 한국조명·전기설비학회 2010 한국조명·전기설비학회 학술대회논문집 Vol.2010 No.5월
1990년대에 메탈핼라이드램프의 석영발광관을 내열성 및 내halide성이 우수한 투광성의 세라믹 발광관으로 하여 광원의 특성을 개선시킨 세라믹 메탈핼라이드램프가 개발되어 현재 옥외조명용으로 급속하게 보급이 이루어지고 있다. 국내의 경우에도 이미 150W급의 single 및 double ended 두 가지 타입의 150W급 세라믹 메탈핼라이드램프가 개발에 성공하여 조만간 내수시장에 국산제품의 보급이 이루어질 것으로 보인다. 본 논문은 국내에서 개발한 150W급 세라믹 메탈핼라이드램프 시제품의 초특성을 국외 선진제품과 성능 비교한 것으로 시스템 효율의 경우 선진제품 대비 약 93% 이상의 수준임을 알 수 있었다.
LIGA-like 공정을 이용한 마이크로 부품 복제용 Ni과 Ni-W 금형 제조 및 특성
황완식,박준식,강영철,조진우,박순섭,이인규,강성군,Hwang, W.S.,Park, J.S.,Kang, Y.C.,Cho, J.W.,Park, S.S.,Lee, I.G.,Kang, S.G. 한국재료학회 2003 한국재료학회지 Vol.13 No.1
Electroplated Ni and Ni-W micro-molds using LIGA-like process for replication of micro-components such as microfluidic parts and micro optical parts have been investigated. In general, it is hard to produce micro-parts using conventional mechanical processes. Micro-mold formed by LIGA-like process could fabricate micro-parts with high aspect ratio. In this paper, fabrication and properties of electroplated Ni molds with varying applied current types as well as those of Ni-W molds were investigated. Ni molds fabricated under pulse-reverse current showed the highest hardness value of about 160 Hv. Ni-W molds showed the hardness of about 500 Hv which was much harder than that of Ni electroplated molds. The above results suggested that high quality micro-molds could be fabricated by using Ni electroplating of pulse-reverse type for core molds and sequential Ni-W alloys coating.
Studies on the Physico-chemical Properties of Mixed Radioactive Waste Glass
Kim, C.W.,Choi, J.R.,Ji, P.K.,Park, J.K.,Shin, S.W.,Ha, J.H.,Song, M.J.,Hwang, T.W.,Park, S.J. The Korean Association for Radiation Protection 2004 방사선방어학회지 Vol.29 No.1
In order to vitrify the W1 waste (ion-exchange resin(IER), zeolite, and dry active waste(DAW)) generated from Korean Nuclear Power Plants, a glass formulation development based on waste compositions and production rates was performed. A aluminoborosilicate glass, AG8W1, was formulated to vitrify the W1 waste in an induction cold crucible melter(CCM). The processability, product performance, and economics of the candidate glass were calculated using a computer code and were measured experimentally in the laboratory and CCM. The glass viscosity and electrical conductivity as the process parameters were in the desired ranges. Start-up and maintaining glass melt of the candidate glass were favorable in the CCM. The product quality of the glass such as chemical durability, phase stability, etc. was satisfactory. The vitrification process using the candidate glass was also evaluated to be operated as economically as possible.