Fault Diagnosis of Transformer Based on Self-powered RFID Sensor Tag and Improved HHT

Tao Wang,Yigang He,Bing Li,Tiancheng Shi 대한전기학회 2018 Journal of Electrical Engineering & Technology Vol.13 No.5

This work introduces a fault diagnosis method for transformer based on self-powered radio frequency identification (RFID) sensor tag and improved Hilbert-Huang transform (HHT). Consisted by RFID tag chip, power management circuit, MCU and accelerometer, the developed RFID sensor tag is used to acquire and wirelessly transmit the vibration signal. A customized power management including solar panel, low dropout (LDO) voltage regulator, supercapacitor and corresponding charging circuit is presented to guarantee constant DC power for the sensor tag. An improved band restricted empirical mode decomposition (BREMD) which is optimized by quantumbehaved particle swarm optimization (QPSO) algorithm is proposed to deal with the raw vibration signal. Compared with traditional methods, this improved BREMD method shows great superiority in reducing mode aliasing. Then, a promising fault diagnosis approach on the basis of Hilbert marginal spectrum variations is brought up. The measured results show that the presented power management circuit can generate 2.5V DC voltage for the rest of the sensor tag. The developed sensor tag can achieve a reliable communication distance of 17.8m in the test environment. Furthermore, the measurement results indicate the promising performance of fault diagnosis for transformer.

Fault Diagnosis of Transformer Based on Self-powered RFID Sensor Tag and Improved HHT

Wang, Tao,He, Yigang,Li, Bing,Shi, Tiancheng The Korean Institute of Electrical Engineers 2018 Journal of Electrical Engineering & Technology Vol.13 No.5

This work introduces a fault diagnosis method for transformer based on self-powered radio frequency identification (RFID) sensor tag and improved Hilbert-Huang transform (HHT). Consisted by RFID tag chip, power management circuit, MCU and accelerometer, the developed RFID sensor tag is used to acquire and wirelessly transmit the vibration signal. A customized power management including solar panel, low dropout (LDO) voltage regulator, supercapacitor and corresponding charging circuit is presented to guarantee constant DC power for the sensor tag. An improved band restricted empirical mode decomposition (BREMD) which is optimized by quantum-behaved particle swarm optimization (QPSO) algorithm is proposed to deal with the raw vibration signal. Compared with traditional methods, this improved BREMD method shows great superiority in reducing mode aliasing. Then, a promising fault diagnosis approach on the basis of Hilbert marginal spectrum variations is brought up. The measured results show that the presented power management circuit can generate 2.5V DC voltage for the rest of the sensor tag. The developed sensor tag can achieve a reliable communication distance of 17.8m in the test environment. Furthermore, the measurement results indicate the promising performance of fault diagnosis for transformer.

Survey of Cognitive Radio VANET

( Xinxin He ),( Weisen Shi ),( Tao Luo ) 한국인터넷정보학회 2014 KSII Transactions on Internet and Information Syst Vol.8 No.11

Vehicular Ad hoc Networks (VANET) becomes more popular in industry, academia and government. However, Typical VANET is challenged by high speed mobility and insufficient spectrum resources over congested scenarios. To address those serious problems, some articles have introduced Cognitive Radio (CR) technology into VANET and formed CR-VANET. In this article, we propose an overview of CR-VANET by exploring different architectures and features. Moreover, we provide taxonomy of state-of-the-art papers in this emerging field and the key articles are well analyzed respectively. In addition, we illustrate both research and application frameworks of CR-VANET based on our works, and propose some open research issues for inspiring future work.

Baicalin attenuates TNBS-induced colitis in rats by modulating the Th17/Treg paradigm

Ying Zou,Shi-Xue Dai,Hong-Gang Chi,Tao Li,Zhi-Wei He,Jian Wang,Cai-Guo Ye,Guo-Liang Huang,Bing Zhao,Wen-Yang Li,Zheng Wan,Jin-Shan Feng,Xue-Bao Zheng 대한약학회 2015 Archives of Pharmacal Research Vol.38 No.10

Baicalin, a flavonoid, has a wide range ofpharmacological properties, including immunomodulation. The objective of this study was to investigate the effect ofbaicalin on the balance of T helper 17 (Th17) and regulatoryT (Treg) cells in a colitis model. The rat colitis modelwas induced by 2,4,6-trinitrobenzene sulfonic acid(TNBS). Baicalin (10 ml/kg, each) or mesalazine (positivecontrol) was then administered orally for 7 days. Inflammatoryand immunological responses were evaluated bypathology, enzyme-linked immunosorbent assay, real-timepolymerase chain reaction, western blot analysis, and flowcytometry. Our study showed that baicalin not only significantlyattenuated TNBS-induced colitis by reducing thedisease activity index as well as macroscopic and microscopicscores, but it also improved the weight loss andshortening of the colon. Baicalin treatment also induced asignificant decrease in the levels of inflammatory mediators,including the myeloperoxidase activity, the levels oftumor necrosis factor a, IL-1b, and Th1-related cytokinesIL-12 and IFN-c. Furthermore, the beneficial effects ofbaicalin seem to be associated with regulation of the Th17and Treg paradigm. We found that administration ofbaicalin significantly downregulated the number of Th17cells and the levels of Th17-related cytokines (IL-17 andIL-6) and retinoic acid receptor-related orphan receptor ct. In contrast, there was an increase in Treg cells numbers,Treg-related cytokines transforming growth factor-b andIL-10, and forkhead box P3. Our results suggest that theanti-inflammatory effect of baicalin may be linked tomodulation of the balance between Th17 and Treg cells inTNBS-induced ulcerative colitis.

A phase II trial of cytoreductive surgery combined with niraparib maintenance in platinum-sensitive, secondary recurrent ovarian cancer: SGOG SOC-3 study

Ting-Yan Shi,Sheng Yin,Jianqing Zhu,Ping Zhang,Jihong Liu,Libing Xiang,Yaping Zhu,Sufang Wu,Xiaojun Chen,Xipeng Wang,Yin-Cheng Teng,Tao Zhu,Aijun Yu,Yingli Zhang,Yanling Feng,He Huang,Wei Bao,Yanli Li 대한부인종양학회 2020 Journal of Gynecologic Oncology Vol.31 No.3

Background: In China, secondary cytoreductive surgery (SCR) has been widely used in ovarian cancer (OC) over the past two decades. Although Gynecologic Oncology Group-0213 trial did not show its overall survival benefit in first relapsed patients, the questions on patient selection and effect of subsequent targeting therapy are still open. The preliminary data from our pre-SOC1 phase II study showed that selected patients with second relapse who never received SCR at recurrence may still benefit from surgery. Moreover, poly(ADP-ribose) polymerase inhibitors (PARPi) maintenance now has been a standard care for platinum sensitive relapsed OC. To our knowledge, no published or ongoing trial is trying to answer the question if patient can benefit from a potentially complete resection combined with PARPi maintenance in OC patients with secondary recurrence. Methods: SOC-3 is a multi-center, open, randomized, controlled, phase II trial of SCR followed by chemotherapy and niraparib maintenance vs chemotherapy and niraparib maintenance in patients with platinum-sensitive second relapsed OC who never received SCR at recurrence. To guarantee surgical quality, if the sites had no experience of participating in any OC-related surgical trials, the number of recurrent lesions evaluated by central-reviewed positron emission tomography–computed tomography image shouldn't be more than 3. Eligible patients are randomly assigned in a 1:1 ratio to receive either SCR followed by 6 cycles of platinum-based chemotherapy and niraparib maintenance or 6 cycles of platinum-based chemotherapy and niraparib maintenance alone. Patients who undergo at least 4 cycles of chemotherapy and must be, in the opinion of the investigator, without disease progression, will be assigned niraparib maintenance. Major inclusion criteria are secondary relapsed OC with a platinum-free interval of no less than 6 months and a possibly complete resection. Major exclusion criteria are borderline tumors and non-epithelial ovarian malignancies, received debulking surgery at recurrence and impossible to complete resection. The sample size is 96 patients. Primary endpoint is 12-month non-progression rate. Trial Registration: ClinicalTrials.gov Identifier: NCT03983226

Evidence of the genetic diversity and clonal population structure of Oenococcus oeni strains isolated from different wine-making regions of China

Dongliang Yu,Kan Shi,Xiangyuan Wen,Fangshu Xie,Tao Wang,Shuwen Liu,Ling He 한국미생물학회 2018 The journal of microbiology Vol.56 No.8

Studies of the genetic diversity and population structure of Oenococcus oeni (O. oeni) strains from China are lacking compared to other countries and regions. In this study, amplified fragment length polymorphism (AFLP) and multilocus sequence typing (MLST) methods were used to investigate the genetic diversity and regional evolutionary patterns of 38 O. oeni strains isolated from different wine-making regions in China. The results indicated that AFLP was markedly more efficient than MLST for typing O. oeni strains. AFLP distinguished 37 DNA patterns compared to 7 sequence types identified using MLST, corresponding to discriminatory indices of 0.999 and 0.602, respectively. The AFLP results revealed a high level of genetic diversity among the O. oeni strains from different regions of China, since two subpopulations and an intraspecific homology higher than 60% were observed. Phylogenetic analysis of the O. oeni strains using the MLST method also identified two major phylogroups, which were differentiated into two distinct clonal complexes by minimum spanning tree analysis. Neither intragenic nor intergenic recombination verified the existence of the clonal population structure of the O. oeni strains.

Effects of a traditional Chinese medicine formula and its extraction on muscle fiber characteristics in finishing pigs, porcine cell proliferation and isoforms of myosin heavy chain gene expression in myocytes

Yu, Qin Ping,Feng, Ding Yuan,He, Xiao Jun,Wu, Fan,Xia, Min Hao,Dong, Tao,Liu, Yi Hua,Tan, Hui Ze,Zou, Shi Geng,Zheng, Tao,Ou, Xian Hua,Zuo, Jian Jun Asian Australasian Association of Animal Productio 2017 Animal Bioscience Vol.30 No.11

Objective: This study evaluated the effects of a traditional Chinese medicine formula (TCMF) on muscle fiber characteristics in finishing pigs and the effects of the formula's extract (distilled water, ethyl acetate and petroleum ether extraction) on porcine cell proliferation and isoforms of myosin heavy chain (MyHC) gene expression in myocytes. Methods: In a completely randomized design, ninety pigs were assigned to three diets with five replications per treatment and six pigs per pen. The diets included the basal diet (control group), TCMF1 (basal diet+2.5 g/kg TCMF) and TCMF2 (basal diet+5 g/kg TCMF). The psoas major muscle was obtained from pigs at the end of the experiment. Muscle fiber characteristics in the psoas major muscle were analyzed using myosin ATPase staining. Cell proliferation was measured using 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) dye and cytometry. Isoforms of MyHC gene expression were detected by real-time quantitative polymerase chain reaction. Results: The final body weight and carcass weight of finishing pigs were increased by TCMF1 (p<0.05), while the psoas major muscle cross-sectional area was increased by TCMF (p<0.05). The cross-sectional area and diameter of psoas major muscle fiber Ι, IIA, and IIB were increased by TCMF2 (p<0.05). The cross-sectional area and fiber diameter of psoas major muscle fiber IIA and IIB were increased by diet supplementation with TCMF1 (p<0.05). Psoas major muscle fiber IIA and IIB fiber density from the pigs fed the TCMF1 diet and the type IIB fiber density from the pigs fed the TCMF2 diet were lower compared to pigs fed the control diet (p<0.05). Pigs fed TCMF2 had a higher composition of type Ι fiber and a lower percentage of type IIB fiber in the psoas major muscle (p<0.05). The expression levels of MyHC Ι, MyHC IIa, and MyHC IIx mRNA increased and the amount of MyHC IIb mRNA decreased in the psoas major muscle from TCMF2, whereas MyHC Ι and MyHC IIx mRNA increased in the psoas major muscle from TCMF1 (p<0.05). Peroxisome proliferator-activated receptor ${\gamma}$ $coactivator-1{\alpha}$ and CaN mRNA expression in the psoas major muscle were up-regulated by TCMF (p<0.05). Porcine skeletal muscle satellite cell proliferation was promoted by $4{\mu}g/mL$ and $20{\mu}g/mL$ TCMF water extraction (p<0.05). Both $1{\mu}g/mL$ and $5{\mu}g/mL$ of TCMF water extraction increased MyHC IIa, MyHC IIb, and MyHC IIx mRNA expression in porcine myocytes (p<0.05), while MyHC Ι mRNA expression in porcine myocytes was decreased by $5{\mu}g/mL$ TCMF water extraction (p<0.05). Porcine myocyte MyHC Ι and MyHC IIx mRNA expression were increased, and MyHC IIa and MyHC IIb mRNA expression were down-regulated by $5{\mu}g/mL$ TCMF ethyl acetate extraction (p<0.05). MyHC Ι and MyHC IIa mRNA expression in porcine myocytes were increased, and the MyHC IIb mRNA expression was decreased by $1{\mu}g/mL$ TCMF ethyl acetate extraction (p<0.05). Four isoforms of MyHC mRNA expression in porcine myocytes were reduced by $5{\mu}g/mL$ TCMF petroleum ether extraction (p<0.05). MyHC IIa mRNA expression in porcine myocytes increased and MyHC IIb mRNA expression decreased by $1{\mu}g/mL$ in a TCMF petroleum ether extraction (p<0.05). Conclusion: These results indicated that TCMF amplified the psoas major muscle cross-sectional area through changing muscle fiber characteristics in finishing pigs. This effect was confirmed as TCMF extraction promoted porcine cell proliferation and affected isoforms of MyHC gene expression in myocytes.

In situ Copolymerized Toughened Polymethyl Methacrylate (PMMA) with Highly Transparency for Support Film of Polarizers

Yingying Wang,Bin Yang,Liangyong He,Yuqing Yang,Nuo Zhang,Yang Wang,Zhiqiang Shi,Yuchao Ke,Lifen Su,Jia-Sheng Qian,RU XIA,Tao Jiang 한국고분자학회 2022 폴리머 Vol.46 No.5

In this study, a series of poly(methyl methacrylate) (PMMA) copolymer films were prepared via solutionpolymerization of methyl methacrylate (MMA) with butyl acrylate (BA) and lauryl methacrylate (LMA) as monomers. Mechanical properties, hydrophobic properties, and optical properties of the films were intensively investigated. The rheological results showed that the fluidity of the copolymer was considerably enhanced. When the monomer ratio ofMMA:BA:LMA was 100:30:10, the copolymer film S4 showed the best overall performance with perfect optical transparency maintained. The results of the dynamic mechanical and thermal analysis suggested that the glass transition temperature (Tg) moved towards lower temperature, with enhanced ductility of the PMMA films. A large number of yieldfolds and crazes appeared on the cross-sectional surface of copolymer films through morphological observations, displaying the obvious characteristics of toughness fracture and obeying the energy dissipation mechanism of cracks shearband. The present study provided a facile way of preparing PMMA films with high toughness and light transmittanceby appropriate selection of the monomers, which will be of practical significance for further studies on the replacementof triacetyl cellulose as a support film of polarizers.

Studies on meat color, myoglobin content, enzyme activities, and genes associated with oxidative potential of pigs slaughtered at different growth stages

Qin Ping Yu,Ding Yuan Feng,Juan Xiao,Fan Wu,Xiao Jun He,Min Hao Xia,Tao Dong,Yi Hua Liu,Hui Ze Tan,Shi Geng Zou,Tao Zheng,Xian Hua Ou,Jian Jun Zuo 아세아·태평양축산학회 2017 Animal Bioscience Vol.30 No.12

Objective: This experiment investigated meat color, myoglobin content, enzyme activities, and expression of genes associated with oxidative potential of pigs slaughtered at different growth stages. Methods: Sixty 4-week-old Duroc×Landrace×Yorkshire pigs were assigned to 6 replicate groups, each containing 10 pigs. One pig from each group was sacrificed at day 35, 63, 98, and 161 to isolate longissimus dorsi and triceps muscles. Results: Meat color scores were higher in pigs at 35 d than those at 63 d and 98 d (p<0.05), and those at 98 d were lower than those at 161 d (p<0.05). The total myoglobin was higher on 161 d compared with those at 63 d and 98 d (p<0.05). Increase in the proportions of metmyoglobin and deoxymyoglobin and a decrease in oxymyoglobin were observed between days 35 and 161 (p<0.05). Meat color scores were correlated to the proportion of oxymyoglobin (r = 0.59, p<0.01), and negatively correlated with deoxymyoglobin and metmyoglobin content (r = –0.48 and –0.62, p<0.05). Malate dehydrogenase (MDH) activity at 35 d and 98 d was higher than that at 161 d (p<0.05). The highest lactate dehydrogenase/MDH ratio was achieved at 161 d (p<0.05). Calcineurin mRNA expression decreased at 35 d compared to that at 63 d and 98 d (p<0.05). Myocyte enhancer factor 2 mRNA results indicated a higher expression at 161 d than that at 63 d and 98 d (p<0.05). Conclusion: Porcine meat color, myoglobin content, enzyme activities, and genes associated with oxidative potential varied at different stages.

Cubic time-spline fitting and interpolation for five-axis CNC machining

Wu Qingle,Yuan Chun-Ming,Shen Li-Yong,He Shi-Tao,Gao Xiao-Shan 한국CDE학회 2023 Journal of computational design and engineering Vol.10 No.6

In CNC machining, G01 codes are widely used to represent the tool path. Directly interpolating these G01 codes is time-consuming and may cause discontinuities. In this paper, we propose a time-spline curve fitting method that combines tool path fitting and feedrate scheduling into a single step for five-axis CNC machining. The input for this method consists of a three-dimensional linear path of the tool tip in the workpiece coordinate system and two-dimensional tool orientations in the machine coordinate system (MCS). The output is a fitted tool path in the MCS represented by a five-dimensional smooth time-parametric B-spline curve, simply referred to as the time-spline curve. The time-spline curve provides not only position information but also kinematic information, including velocity, acceleration, and jerk for each axis, directly derived from the first, second, and third derivatives of the curve. To meet fitting error constraints and axial kinematic constraints, our objective is to find the time-spline curve that is time-optimal. We formulate the optimization problem as a nonlinear optimization model and design a recursive algorithm to solve it. The resulting time-spline curve demonstrates high accuracy and fully utilizes the machine’s kinematic capabilities. Along the tool path defined by the time-spline curve, exact interpolation points can be straightforwardly obtained according to the interpolation period. Simulations and experimental results indicate that the proposed method yields a time-optimal time-spline curve with the desired precision and kinematic constraints.