Ultrasonic Vibration Assisted Cutting of Nomex Honeycomb Core Materials

Dao‑Hui Xiang,Bang‑Fu Wu,Yun‑Long Yao,Bo Zhao,Jin‑Yuan Tang 한국정밀공학회 2019 International Journal of Precision Engineering and Vol.20 No.1

Nomex honeycomb core materials have been widely used in the aviation industry due to their special structure and performance. Conventional high-speed machining have resulted in the poor machinability of the honeycomb core so that the ultrasonic machining technology was applied. The kinematic characteristics in the ultrasonic vibration assisted cutting process were analyzed according to the movement of the sharp tool. Based on slide effect, a cutting force model was proposed to study the relationship between cutting parameters and cutting force. Ultrasonic vibration assisted cutting and ordinary cutting tests of Nomex honeycomb core material were conducted by considering feed rate, the inclined angle and the deflected angle. Besides, the effects of cutting parameters on machined surface quality of honeycomb core wall were studied. The test results show that slide effect caused by ultrasonic vibrations can reduce cutting resistance compared with ordinary cutting. The developed cutting force model can be applied to evaluated the cutting force in the ultrasonic vibration assisted cutting of Nomex honeycomb core material. The inclined angle has a great influence on the cutting force during ultrasonic vibration assisted cutting. High-speed reciprocating sliding action can effectively cut aramid fibers so that burrs and tearing defects of the incision have been greatly improved under condition of ultrasonic vibration assisted cutting.

A Study on Factor that Effect on Consumer’s Behaviour on Cross-Border E-Commerce in Vietnam - Ho Chi Minh City

Dao,Duy Thang,Hyun,In-Gyou 한국유통과학회 2019 KODISA ICBE (International Conference on Business Vol.2019 No.-

Vietnam E-commerce has been used and developed 10 years ago but recently, with removing tariff barriers, Vietnam’s customer can easily buy almost thing in the foreign web-site. However, little research has been done to study how to customer’s using intention on across national borders. This study aims to find the factors that effect to customer’s using intention on foreign direct online shopping. A conceptual model is developed from the perspectives of customer’s trust and value. We also examine the impact of information’s signal, security and safe, country image on customer’s trust, as well as the impact of benefits, innovation, cost on customer’s perceived value. This study use an online survey to make questionnaire about the factor and use the answer to test the research model. Our findings can help researchers and practitioners understand the barriers and behaviour of Ho Chi Minh City’s customers to cross-border e-commerce and devise strategies to make profit.

Influence of Rain Gauge Density and Temporal Resolution on the Performance of Conditional Merging Method

Dao,Duc Anh,Kim,Soohyun,Kim,Tae-Woong,Kim,Dongkyun 한국방재학회 2019 한국방재학회논문집 Vol.19 No.6

본 연구는 in-situ 강우자료와 레이더자료를 병합하는 조건부 합성(CM)기법의 성능 평가를 목표로 한다. 합성방법은 다음 단계를 통해 처리된다. (1) 정규 크리깅(OK) 기법은 관측소와 레이더 기반 크리깅 강우장을 얻기 위해 적용한다. (2) 보정 강우장은 원래 레이더 강우장에서 레이더기반 크리깅 강우장의 차로 계산한다. (3) 합성강우량은 관측소기반 크리깅 강우장에 보정 강우장을 더하여 도출한다. 분석결과는 CM기반 강우장이 조사된 모든 33개의 10분 강우장 중 22개 사례에 대해 관측소기반 강우장보다 더 정확한 것으로 나타났다. CM 방법과 관측소기반 OK기법의 상관계수는 각각 0.63과 0.83 그리고 0.01과 0.74 사이 값을 보인다. 두 방법의 성능은 관측소 밀도가 높고 시간해상도가 낮을수록 향상되었다. OK기법의 성능은 관측소 밀도에 더 민감하고, CM 기법의 성능은 시간해상도에 더 민감한 것으로 나타났다. 또한, 기존 관측소 밀도가 100 km2 당 1개 일 때, 관측소를 추가하면 두 방법의 성능이 크게 향상되었다. 관측소 증가에 의한 강우량 측정 개선 정도는 관측소 개수가 100 km2 당 4개 이상에 도달할 시 효과가 미미한 것으로 나타났다. This study aims to evaluate the performance of conditional merging (CM) technique to merge radar and in-situ rain gauge data. The merging method contains the following steps: (1) the ordinary kriging(OK) technique is applied to obtain the gauge-only and radar-only kriged rainfall fields; (2) the correction field is calculated by subtracting the radar-only kriged rainfall field from the original radar field; (3) the composite rainfall is derived by adding the correction field to the gauge-only kriged field. We investigated 33 10-min rainfall fields; there were 22 instances where the CM-based rainfall fields were more accurate than the gauge-only fields. The correlation coefficients of the CM and the gauge-only OK methods varied between 0.63 and 0.83, and 0.01 and 0.74 respectively. The performance of both methods improved with greater gauge density and coarser temporal resolution. Furthermore, the OK and CM techniques’performances were more sensitive to gauge density and temporal resolution respectively. We also found that the addition of gauge significantly improved the performance of both methods when the existing gauge density is approximately 1 gauge/100 km2. However, this effect is absent when the density reaches 4 gauges/100 km2.

당송(唐宋)시기 도통(道統)내용의 전환 -당말(唐末)에서 북송(北宋)시기 도의 전승 내용에 관한 담론을 중심으로-

임명희 ( Myung Hee Lim ) 한국철학사연구회 2013 한국 철학논집 Vol.0 No.36

住居移動의 理念的 모델 定立

韓大鉉 강릉대학교 영동산업문제연구소 1985 産經論叢 Vol.4 No.-

Stewardship Theory and Information on Family Firm Performance in Vietnam

Thi Thanh Binh DAO(Thi Thanh Binh DAO ),Linh Chi HOANG(Linh Chi HOANG ) 한국유통과학회 2022 유통과학연구 Vol.20 No.12

Purpose: The paper contributes to the existing literature on Vietnamese corporate governance and firm performance with a focus on listed family firms and the use of a more suitable econometric framework to analyze firm performance. The study investigates how family firm performance is affected by corporate governance under the standpoint of stewardship theory in Vietnam. Research design, data and methodology: With the use of different measures for firm performance (Tobin’s Q, ROA, and ROE), regression models were estimated using Generalized Least Square (GLS) method on a panel data of a total of 113 listed companies during the five-year period from 2015 to 2019. Results: We found that family ownership as the main characteristic of the stewardship theory affects family firms positively. In addition, several other characteristics in corporate governance as board composition (board independence, board audits, and board committees), CEO (age and tenure) and firm characteristics (size, age, expansion, and annual sales) showed significant impacts on firm performance. Our findings also suggest that family firm performance can be either positively or negatively affected based on the characteristics of corporate governance. The findings can help companies evaluate the significance of corporate governance through deciding board structure and the selection of CEOs to match family firm characteristics. It also gives insights for investors, rating agencies, and policymakers for relevant purposes.

Passive control of railway vehicle car body flexural vibration by means of underframe dampers

Dao Gong,Jinsong Zhou,Wenjing Sun 대한기계학회 2017 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.31 No.2

To suppress vertical flexural vibration of a railway vehicle car body, a new passive control method by mounting dampers on the longitudinal beams of the car body underframe is proposed. The method is firstly studied by an Euler-Bernoulli beam model using Green’s functions, then it is further verified by a nonlinear dynamic model of the vehicle. Results show that the car body flexural vibration can be noticeably reduced by this method. It is better to mount the damper near the car body centre. The higher damping coefficient of the damper, the more effective in decreasing the car body first vertical bending vibration. The higher the rigidity of the damper bracket and rubber bush, the better performance of the damper. It is found that when mounting six dampers at proper positions, the damping coefficient of each damper is 1.33×10 7 N·s/m, even if the first vertical bending frequency of the studied car body is only 7.2 Hz, a very good ride quality will be achieved when the vehicle runs at 250 km/h.

A facile synthesis of bimetallic AuPt nanoparticles as a new transparent counter electrode for quantum-dot-sensitized solar cells

Dao, Van-Duong,Choi, Youngwoo,Yong, Kijung,Larina, Liudmila L.,Shevaleevskiy, Oleg,Choi, Ho-Suk Elsevier 2015 Journal of Power Sources Vol.274 No.-

<P><B>Abstract</B></P> <P>This study first reports the synthesis of AuPt bimetallic nanoparticles (AuPt-BNPs) on an FTO glass substrate using dry plasma reduction (DPR) and its application as an alternative transparent counter electrode (CE) for quantum-dot-sensitized solar cells (QDSCs) operated under bi-side illumination. DPR is an economically feasible and ecologically sustainable method. The formation of ultrafine crystalline AuPt-BNPs on an FTO substrate is confirmed through TEM, HRTEM with HAADF-STEM and HAADF-STEM-EDS analyses. The mechanism for controlling the size, mono-dispersity, and areal number density of nanoparticles on the substrate surface is suggested. The CE fabricated with AuPt-BNPs exhibits a high electro-catalytic activity without losing the optical transmittance of the FTO substrate. The QDSC employing the AuPt-BNP electrode reaches efficiencies of 2.4% under front-side illumination and 2.2% under back-side illumination. Bi-side illumination yields an efficiency of 3.4%, which is comparable to an efficiency of 3.7% obtained for the QDSC with the state-of-the-art CE.</P> <P><B>Highlights</B></P> <P> <UL> <LI> An ultrafine crystalline AuPt-BNP electrode was successfully fabricated using DPR. </LI> <LI> The formation mechanism of BNPs provides a way for tuning catalyst morphology. </LI> <LI> The BNPs show high catalytic activity without reducing the optical transmittance. </LI> <LI> Bi-side illumination yields 3.4% efficiency comparable to 3.7% of Au-sputtered CE. </LI> <LI> The proposed method can be a key technique for efficient and transparent QDSCs. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

High-Efficiency Heterojunction with Intrinsic Thin-Layer Solar Cells: A Review

Dao, Vinh Ai,Kim, Sangho,Lee, Youngseok,Kim, Sunbo,Park, Jinjoo,Ahn, Shihyun,Yi, Junsin Korea Photovoltaic Society 2013 Current Photovoltaic Research Vol.1 No.2

Heterojunction with Intrinsic Thin-layer (HIT) solar cells are currently an important subject in industrial trends for thinner solar cell wafers due to the low-temperature of production processes, which is around $200^{\circ}C$, and due to their high-efficiency of 24.7%, as reported by the Panasonic (Sanyo) group. The use of thinner wafers and the enhancement of cell performance with fabrication at low temperature have been special interests of the researchers. The fundamental understanding of the band bending structures, choice of materials, fabrication process, and nano-scale characterization methods to provide necessary understanding of the interface passivation mechanisms, emitter properties, and requirements for transparent oxide conductive layers is presented in this review. This information should be used for the performance characterization of the developing technologies for HIT solar cells.

Association between Intracranial Arterial Dolichoectasia and Cerebral Small Vessel Disease and Its Underlying Mechanisms

Dao Pei Zhang,Suo Yin,Huai Liang Zhang,Dan Li,Bo Song,Jia Xu Liang 대한뇌졸중학회 2020 Journal of stroke Vol.22 No.2

Intracranial arterial dolichoectasia (IADE), also known as dilatative arteriopathy of the brain vessels, refers to an increase in the length and diameter of at least one intracranial artery, and accounts for approximately 12% of all patients with stroke. However, the association of IADE with stroke is usually unclear. Cerebral small vessel disease (CSVD) is characterized by pathological changes in the small vessels. Clinically, patients with CSVD can be asymptomatic or present with stroke or cognitive decline. In the past 20 years, a series of studies have strongly promoted an understanding of the association between IADE and CSVD from clinical and pathological perspectives. It has been proposed that IADE and CSVD may be attributed to abnormal vascular remodeling driven by an abnormal matrix metalloproteinase/tissue inhibitor of metalloproteinase pathway. Also, IADErelated hemodynamic changes may result in initiation or progression of CSVD. Additionally, genetic factors are implicated in the pathogenesis of IADE and CSVD. Patients with Fabry’s disease and late-onset Pompe’s disease are prone to developing concomitant IADE and CSVD, and patients with collagen IV alpha 1 or 2 gene (COL4A1/COL4A2) and forkhead box C1 (FOXC1) variants present with IADE and CSVD. Race, strain, familial status, and vascular risk factors may be involved in the pathogenesis of IADE and CSVD. As well, experiments in mice have pointed to genetic strain as a predisposing factor for IADE and CSVD. However, there have been few direct genetic studies aimed towards determining the association between IADE and CSVD. In the future, more clinical and basic research studies are needed to elucidate the causal relationship between IADE and CSVD and the related molecular and genetic mechanisms.