http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정상섬,홍문현,고준영,Jeong, Sangseom,Hong, Moonhyun,Ko, Jun 대한토목학회 2015 대한토목학회논문집 Vol.35 No.4
본 연구에서는 보강날개로 보강된 수중잠제 지지말뚝의 보강효과를 분석하기 위하여 하중전이거동을 분석하였다. 먼저 3차원 유한요소해석을 통해 말뚝의 변위 및 하중전이곡선(지반반력) 결과로부터 보강효과를 확인하고, 하중전이곡선에서 극한저항력 비율로 보강말뚝의 수평 및 인발하중에 대한 보강계수를 산정함으로써 보강효과를 정량화 하였다. 산정된 보강계수를 쌍곡선 하중전이함수의 극한저항력 $p_u$와 $t_{max}$에 곱해서 보정상수(fitting parameter)로 적용하여 보강효과를 고려한 하중전이함수를 제안하였다. 제안된 하중전이함수가 수치해석 결과를 잘 반영하고 있는지 확인하기 위해 3차원 유한요소해석을 비교하여 보강말뚝의 하중전이거동을 분석하였다. 제안된 하중전이함수를 하중전이법 해석에 적용하여, 실제 수중잠제를 해석한 결과 보강말뚝의 전단력, 휨 모멘트, 변위가 무보강말뚝보다 작게 발생하고, 지반반력은 더 크게 발생하여 비교적 경제적인 설계가 가능할 것으로 판단된다. The use of pile reinforcement is considered as one of the most promising techniques for improving load carrying capacity of piles in offshore area. In this study, to consider the horizontal and uplift bearing capacity of submerged breakwater bearing pile, exclusive analysis on load-transfer behaviour of pile was conducted. First of all, check the reinforcing effect from the three-dimensional finite element method, and estimate load transfer curve (ground reaction force). Based on these results, the reinforcing effect was quantified by estimating the coefficients of horizontal and uplift reinforcement of reinforced piles. Load transfer function with consideration of the reinforcing effect was proposed from estimated coefficients. A comparison of the analysis using the proposed load transfer function with three-dimensional finite element analysis has resulted that the proposed load transfer function is displaying good accuracy of predicting behavior of the load transfer between the pile and soil reinforcement. Interpretation of the submerged structure by applying a load transfer function considering the reinforcing effect, has shown that the reinforced pile's shear, bending moment and displacement are less than that of non-reinforced piles, while the subgrade reaction modulus arises greater. Thus, it is expected to be relatively cost effective in terms of design.
서화천 유역 비점오염원 관리를 위한 부하지속곡선 적용성 연구
갈병석 ( Byung-seok Kal ),문현생 ( Hyun-saing Mun ),홍선화 ( Seon-hwa Hong ),박천동 ( Chun-dong Park ),민경옥 ( Kyeong-ok Min ),박재범 ( Jae-beom Park ) 한국지리정보학회 2020 한국지리정보학회지 Vol.23 No.3
본 연구에서는 대청호 상류에 있는 서화천 유역에서 부하지속곡선을 통한 소유역별 비점오염원 취약지역 및 관리 오염물질과 관리 시기를 분석하였다. 먼저 부하지속곡선을 만들기 위하여 장기유출 모형인 SWAT를 구축하여 유량지속곡선(Flow Duration Curve)을 작성하였으며 그 결과에 목표 수질을 곱하여 부하지속곡선(Load Duration Curve)을 작성하였다. 목표 수질은 서화천 비점오염원 관리를 위해 지난 2017년 11월부터 측정한 모니터링 자료를 사용하였으며 측정자료의 60분위에 해당하는 값을 목표 수질로 설정하였다. 이때 산정된 값이 하천 생활환경 기준의“약간 좋음”(Ⅱ)을 초과할 경우 목표 수질을“약간 좋음”(Ⅱ)으로 제한하였다. 비점오염원 취약지역은 목표 수질을 초과하는 초과율을 이용하여 선정하였으며 초과 되는 오염물질을 관리 물질로 판단하고 계절별 평가를 통해 관리시기를 선정하였다. In this study, we analyzed the vulnerable areas of non-point source pollutants and management pollutants and management time by subwatershed curves in the Seohwacheon basin located upstream of Daecheongho. First, in order to create a load duration curve, a long-term flow model SWAT was constructed to create a flow duration curve, and the result was multiplied by the target water quality to create a load duration curve. For the target water quality, monitoring data values measured from November 2017 were used for the management of nonpoint source pollutants in Seohwacheon, and a value corresponding to 60 percentile of the measured data was set as the target water quality. At this time, the target water quality was limited to“slightly good”(II) when the calculated value exceeded“slightly good”(II) of the river living environment standard. The vulnerable areas of non-point source of pollution were selected using the excess rate exceeding the target water quality, and the excess pollutant was judged as a management substance and the management time was selected through seasonal evaluation.
정상섬,이준환,박종전,노양훈,홍문현,Jeong, Sang-Seom,Lee, Jun-Hwan,Park, Jong-Jeon,Roh, Yang-Hoon,Hong, Moon-Hyun 한국지반공학회 2017 한국지반공학회논문집 Vol.33 No.8
본 연구에서는 말뚝지지 전면기초의 하중분담률 및 거동분석을 위해 시공단계 별 현장계측을 수행하였다. 현장계측은 시공시작일 부터 약 300일 동안 수행되었으며, 사용된 말뚝지지 전면기초는 $3.1m{\times}3.1m$ 크기의 전면기초와 길이 23m 직경 0.508m의 매입말뚝 5본이 시공되었다. 현장계측을 통해 시공단계에 따라 말뚝지지 전면기초의 하중-침하량 관계를 확인할 수 있었고, 극한하중조건에서 말뚝의 하중분담률은 약 70%에 수렴하였다. 기초의 침하량이 증가함에 따라 말뚝의 하중분담률이 증가하는 경향을 보였으며, 이는 하부 지반인 풍화토의 주면마찰력이 크게 영향을 주었기 때문으로 판단된다. 현장계측 결과를 이용하여 하중전이분석을 수행하였으며, 이를 통해 말뚝-지반 사이의 비선형 하중전이곡선을 산정하고 하중전이기법을 이용한 수치해석 결과에 적용하였다. In this study, field measurements were investigated to analyze the load sharing ratio and behavior of piled raft foundation. The field measurements were performed for about 300 days from the start of construction. The geometry of the raft is $3.1m{\times}3.1m$, and the pre-cast and pre-bored pile is 23 m in length and 0.508 m in diameter. Based on the field measurements, the load-settlement relationship of the piled raft foundation was obtained, and the load sharing ratio of the pile was converged to 70% at ultimate loading condition. The load sharing ratio of the pile increased as the settlement increased, and this is because the surface friction of the weathered soil, which is at the lower ground, was significantly increased. Based on the results of the field measurements, load transfer curves were obtained and applied to a numerical analysis by using load transfer method.