http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정지훈,이강,김정훈,최재진,Chung, Jihoon,Lee, Ghang,Kim, Jung-Hoon,Choi, Jaejin 한국건설관리학회 2020 한국건설관리학회 논문집 Vol.21 No.2
본 연구의 목적은 기존의 3D 콘크리트 프린터의 분류체계를 검토하고 비교분석하여 3D 콘크리트 프린터의 분류체계를 제안하는 것이다. 기존의 3D 프린터에 대하여 여러 분류체계가 제안되어 왔고, 관련 시장에서는 이를 사용하기도 한다. 그럼에도 불구하고, 상당히 많은 종류의 프린터가 FDM(Fused Deposition Modeling)이나 SLM(Selective Laser Melting)처럼 3D 콘크리트 프린터를 특징짓는데 적절하지 않다. 3D 콘크리트 프린터 간에 구분 짓는 특징을 밝히기 위해서, 본 연구는 기존의 3D 콘크리트 프린터를 검토하고 기존 연구에서 확인된 3D 콘크리트 프린터의 특징을 비교분석을 하였다. 그 결과, 기존의 분류체계는 최신 3D 콘크리트 프린터를 반영하지 못하였고, 분류 용어들은 모호하며, 전체 출력과정은 고려되지 않았음을 알 수 있었다. 기존 연구 분석을 통하여 3D 콘크리트 프린터의 필수적인 특징들을 도출함으로써, 새 분류체계를 제안하였다. 본 연구결과는 3D 콘크리트 프린터 관련 연구들뿐만 아니라, 상업용 3D 콘크리트 프린터들을 분류하는데 기초가 될 수 있을 것이다. This study reviews and comparatively analyzes existing classification systems for 3D concrete printers to propose a classification system for 3D concrete printers. Several classifications for existing 3D printers have been proposed and used in the market. Nevertheless, quite a few of the printer types such as fused deposition modeling (FDM) and selective laser melting (SLM) are not suitable for characterizing 3D concrete printers. To derive the properties that distinguish one 3D concrete printer type from the others, this study reviews existing 3D concrete printers and comparatively analyzes the properties of 3D concrete printers identified in previous studies. The results show that existing classifications do not reflect the states-of-the-art of 3D concrete printers, the classification terms are ambiguous, and the entire printing processes are not considered. A new classification system was proposed based on the essential properties of the 3D concrete printers identified through the analysis of related work. The result of this study can be used as a basis for classifying commercial 3D concrete printers as well as studies related to 3D concrete printers.
2단계 튜닝 방법을 적용한 PHS 용 CMOS Bandpass Complex Filter의 설계
정지훈(JiHoon Jung),김진경(JinKyung Kim),이강윤(Kang-Yoon Lee) 대한전자공학회 2006 대한전자공학회 학술대회 Vol.2006 No.11
This paper presents a baseband complex bandpass filter for PHS applications with a new automatic tuning method. The full-CMOS PHS transceiver is implemented by adopting the Low-IF architecture to overcome the DC-offset problems. To meet the Adjacent Channel Selectivity (ACS) performance, the 3rd-order Chebyshev complex bandpass filter is designed as the baseband channel-select filter. The new comer frequency tuning method is proposed to compensate the process variation. This method can reduce the noise level due to MOS switches. The filter was fabricated using a 0.35㎛ CMOS process, and the power consumption is 12㎽.
우리나라 지역별 고온 극한 현상에 의한 사망 취약도 비교
정지훈(Jihoon Jung),김인겸(In-Gyum Kim),이대근(Dae-Geun Lee),신진호(Jinho Shin),김백조(Baek-Jo Kim) 대한지리학회 2014 대한지리학회지 Vol.49 No.2
본 연구에서는 지구 온난화의 가장 직접적인 영향 중 하나인 폭염에 따른 사망자수 변화를 분석하였다. 지난 17년(1994~2010)간의 기온자료와 사망자수 자료를 바탕으로 각 도시별 사망자가 급증하는 임계온도와 최소사망 온도를 분석하였다. 분석결과 우리나라 전 지역의 최소사망 온도는 평균 23~25℃로 나타났으며, 강원도가 23.0℃로 가장 낮게 나타나고 7대도시와 전라북도가 25.45℃로 가장 높게 나타났다. 사망자가 급증하는 임계온도의 경우 평균 27~30℃로 나타났다. 임계온도가 높은 지역은 대부분 포항, 전주, 원주, 대구와 같은 대도시가 많았으며, 임계온도가 낮은 지역은 금산, 문경, 봉화, 보은 등 상대적으로 작은 규모의 도시였다. 한편, 인구구조 취약성이 높은 지역일수록 최소사망 온도가 낮았으며(r=-0.44, p=0.06), 사회·경제·환경 취약성이 높을수록 최소사망 온도와(r=-0.36, p=0.032) 임계온도(r=-0.29, p=0.081)가 낮다는 점을 보여줬다. 본 연구는 앞으로 지구온난화가 진행됨에 따라 사망자가 급격하게 증가할 수 있으며, 지역별로 다양한 자연적, 사회적, 경제적 요소 등이 복합적으로 작용하여 지역에 따라 큰 편차를 보일 수 있다는 점을 보이고 있다. This study tries to investigate the changes of mortality regarding heat waves which are usually considered as one of the most direct impacts of climate change. Based on 17 years data period (1994- 2010), each city’s threshold temperature and minimum mortality temperature are recognized. According to the results, minimum mortality temperature varies from 23 to 25°C, showing minimum temperature corresponding to 23.0°C in Gangwondo and maximum temperature corresponding to 25.4°C in Jeollabukdo and Major 7 city group. In case of threshold temperature, it ranges from 27 to 30°C. The cities having higher threshold temperatures tend to have large populations and vice versa. In addition, the cities having negative demographic vulnerability relatively have lower temperatures, representing correlation -0.44(p=0.06). The socio-economic-environmental vulnerability shows negative correlation with minimum mortality temperature(r=-0.36, p=0.032) and threshold temperature(r=-0.29, p=0.081). This paper represents that the number of mortality could increase rapidly and show large spatial differences in the number of mortality depending on various factors including natural, social, and economic factors of each region.
다차원 히스토그램에서 범위 질의의 선택도에 대한 오차 추정
정지훈(Jihoon Jung),홍석진(Seokjin Hong),배진욱(Jinuk Bae),안성준(Seongjoon Ahn),송병호(Byoungho Song),이석호(Sukho Lee) 한국정보과학회 2001 한국정보과학회 학술발표논문집 Vol.28 No.2Ⅰ
히스토그램은 질의 최적화를 위해 사용되는 통계 정보 중 하나이다. 최근에는 방대한 데이타에 대한 범위 질의의 선택도 추정 방법의 하나로 사용되기도 한다. 히스토그램을 통한 범위 질의의 선택도 추정 결과는 항상 오차를 포함한다. 따라서 결과의 신뢰성을 보장하기 위해 선택도에 대한 오차를 추정하는 방법이 요구된다. 추정된 선택도의 오차 추정에 대한 기존의 방법은 1차원 히스토그램만을 고려하여 하나의 애트리뷰트의 값에 따라 빈도의 분포를 반영하므로 애트리뷰트가 많은 다차원 히스토그램에 바로 적용시키는데 문제가 있다. 이 논문에서는 기존의 추정된 선택도에 대한 오차 추정 기법들을 다차원에 적용할 수 있게 확장한 M-Max, M-Sum 기법을 제안하고, 두 기법을 합친 하이브리드 기법을 제안한다. 실험을 통해 M-Sum 기법과 하이브리드 기법이 M-Max 기법보다 정확한 오차 추정 기법임을 보이고, 또한 작은 기억 공간에서도 두 기법이 오차를 보다 정확하게 추정함을 보인다.
효율적인 자원 사용을 위한 예측기반 동적 쓰레드 풀 기법
정지훈(Jihoon Jung),한세영(Saeyoung Han),박성용(Sungyong Park) 한국정보과학회 2004 정보과학회논문지 : 시스템 및 이론 Vol.31 No.3·4
본 논문에서는 다중 쓰레드 기반의 서버 프로그래밍을 위한 예측 기반의 동적 쓰레드 풀 기법을 제안하였다. 기존의 쓰레드 풀(Thread Pool) 모델은 고정된 쓰레드 풀(Bounded Thread Pool)모델로, 서버에 최적화된 개수의 쓰레드를 유지하면서 다수의 요청에 대해 빠르게 응답할 수 있다는 장점이 있으나, 사용자의 접속이 적을 경우에도 고정된 시스템 자원을 점유하여야 하므로, 자원의 효율적인 사용에 문제가 있다. 이를 극복하기 위해 동적으로 쓰레드 풀의 크기를 변경하는 워터마크 쓰레드 풀 모델이 개발되었고, 본 논문에서는 이를 기반으로 지수평균을 사용하여 앞으로 필요한 쓰레드의 개수를 예측하고 쓰레드를 사전에 생성하여 더욱 효율적으로 자원을 활용하도록 하는 예측기반의 동적 쓰레드 풀 기법을 제안하였다. 제안한 기법은 사용자의 요청이 많을 경우 사용자 요청에 대한 응답시간을 빠르게 하고, 요청량이 적을 경우에는 불필요한 자원을 점유하지 않게 하여 기존의 워터마크 쓰레드 풀 모델에 비해 보다 성능이 좋고 자원을 효율적으로 활용함을 실험을 통해 확인하였다. A dynamic thread pool model is one of a multi-thread server programming model that handles many requests from users concurrently. In most cases, bounded thread pool model is used for server programming. Because it reduces a thread overhead by creating a pool of threads in advance, it can response more quickly to users' requests. But this model always occupies system resources when there are small amount of requests, which prevents other applications from using available resources. In this paper, for the utilization of occupied but unused resources, we proposed and implemented a prediction-based dynamic thread pool scheme using customized exponential average. From the experiments, we show that this scheme outperforms bounded thread pool model and uses small resources.