외상성(外傷性) 기관지(氣管支) 파열(破裂) - 1례(例) 보고(報告) -

이종국,이성구,이성행,Lee, Chong Kook,Lee, Sung Koo,Lee, Sung Haing 대한흉부심장혈관외과학회 1976 Journal of Chest Surgery (J Chest Surg) Vol.9 No.1

Rupture of a bronchus is an unusual result of nonpenetrating trauma to the chest. This case was a 19 year old male who was a worker in the mine. The patient had sustained a compression chest injury without external wound or rib fracture. At five days after trauma, he was suffered from dyspnea and the symptom was progressively increased. Two weeks after the chest trauma, a diagnosis of left main bronchial obstruction due to traumatic bronchial rupture was made by means of bronchoscopy and bronchography. He was operated upon. The left lung was completely atelectatic and the left main bronchus was found to be transected at the level of 3cm from carina. End-to-end anastomosis of the bronchus was performed and the left lung was aerated very well. postoperative course was uneventful.

기관(氣管) 섬유종(纖維腫)의 1례(例)

이종국,이성구,이성행,Lee, Chong Kook,Lee, Sung Koo,Lee, Sung Haing 대한흉부심장혈관외과학회 1976 Journal of Chest Surgery (J Chest Surg) Vol.9 No.1

Primary tumors of trachea are rather uncommon, and few cases of direct surgical excision were reported in the literature. Recently we had the opportunity to see a patient with a benign obstructing tumor of the trachea which was confirmed as fibroma. The patient has complained of intermittent dyspnea, especially during inspiratory phase, dry cough and wheezing of a strident character for last 8 years. Bronchoscopy or bronchography were not attempted because of severe dyspnea. Trachea tomogram revealed oval mass at the terminal trachea. The right posterolateral thoracotomy was performed. Tumor, $2.5{\times}1.7cm$ in size, was located at terminal trachea and removed through right lateral tracheotomy without difficulty. Postoperatively all the symptoms and signs disappeared.

초등학교 건축의 노인시설 복합화에 관한 연구

이종국,Lee, Jong-Kuk 한국교육녹색환경연구원 2002 교육·녹색환경연구 Vol.2 No.1

New buildings are to be needed for an aging society. But, there may be a solution on the multi-purpose & mixed-use existing facilities. Therefore this study is focused on verification of mixed-use school facilities's potentialities. If possible, I want to suggest some directions of renewal primary school planning. The results of this study are as follows : 1) It is important to make a policy for improving the educational environment, 2) Future buildings must be planned by the principles based on the lifelong learning, 3) Mixed-use building blocks need to be laid out by the concept of accessibility, 4) We can use existing primary school's areas as a elderly welfare facilities without any renovation and increasing areas.

가수분해법에 의한 알루미나 코팅 지르코니아 분말의 제조

이종국,김윤수,김환,Lee, Jong-Kook,Kim, Yoon-Soo,Kim, Hwan 한국세라믹학회 1995 한국세라믹학회지 Vol.32 No.12

Zirconia powder coated with alumina was prepared by hydrolysis of alumina butoxide. The coated powder was obtained by a hydrolysis reaction between the adsorbed water on the surface of zirconia particles and aluminum sec-butoxide. Amorphous aluminum hydroxide was uniformly coated on the surface of zirconia particles with the thickness of about 30 nm. The shape and distribution of aluminum hydroxide was varied with an existence of surfactant. The coated layer of aluminum hydroxide consists of the fine particle size, and the zirconia powder coated by alumina hydroxide have the large specific surface area of 120 $m^2$/g, compared with that of starting zirconia powder.

Yttria를 도핑한 세리아 안정화 지르코니아 세라믹스의 미세구조

이종국,강현희,서동석,이은구,김환,Lee, J.K.,Kang, H.H.,Seo, D.S.,Lee, E.G.,Kim, H. 한국재료학회 1999 한국재료학회지 Vol.9 No.8

세리아 안정화 지르코니아 성형체내에 이트리아를 침적법으로 도핑시켜 미세구조를 관철하였다. 도핑된 이트리아의 양과 열처리 조건을 제어하여 입계가 변형된 불규칙 입자형상의 미세구조를 형성시켰으며, 이때 입자형상의 불규칙 정도는 첨가된 이트리아의 양에 비례하였다. 0.2M 농도의 Y(NO$_3$)$_3$.6$H_2O$의 수용액에 재침적하여 1$650^{\circ}C$에서 2시간 열처리한 시편의 미세구조는 표면부와 내부 모두에서 불규칙 입자형상을 나타내었으며, 입자의 불규칙도도 가장 큰 것으로 나타났다. 가압소결을 행한 결과 입계가 불규칙하게 변화된 미세구조가 창출됨과 동시에 평균입자 크기가 0.3$\mu\textrm{m}$ 가량인 미세한 소결체를 제조할 수 있었으며, 상분석 결과 대부분 정방정상을 유지하고 있었다. 불규칙 입자형상의 미세구조를 가진 시편의 파괴인성값은, 정상적인 입자형상을 갖는 시편에서의 압흔 균열 크기로부터 비교 유추한 결과 17.6MPa.m(sup)1/2 이상인 것으로 나타났다. Yttia-doped ceria-stabilized ziconia polycrystals(Ce-TZP) was prepared by dipping method and its microstructure was investigated. By controlling doped-yttria content and annealing condition, yttria-doped Ce-TZP showed the microstructure with irregular grain shape and undulated grain boundary. Irregularity of grain shape increased with the amount of yttria doped, and severe undulated grain boundary was observed mainly at the surface region. In the case of yttria-doped Ce-TZP annealed at 1$650^{\circ}C$ for 2h after two dipping times into yttrium nitrate solution of 0.2M, it showed irregular grain shape both at the surface and at the interior region as well as the most severe irregularity. Hot pressed specimen had mean grain size of 0.3$\mu\textrm{m}$ and undulated grain boundary. All specimens with irregular grain shape were retained the tetragonal phase. The fracture toughness of yttria-doped Ce-TZP with irregular grain shape was over the value of 17.6MPa.m(sup)1/2.

알코옥시드 가수분해법으로 합성한 이트리아 안정화 지르코니아 분말의 상안정성 및 등온상전이 특성

이종국,김영쟁,김환,Lee, Jong-Kook,Kim, Young-Jeong,Kim, Hwan 한국세라믹학회 1996 한국세라믹학회지 Vol.33 No.6

$Zr(i-OC_3H_7)_4$로부터 가수분해법으로 Y-TZP 분말을 제조한 다음, 하소온도를 달리하여 정방정상의 상온 안정화와 25$0^{\circ}C$에서의 등온상전이 거동을 고찰하였다. 그 결과, 정방정상 지르코니아 입자의 상온 안정화 효과는 하소온도가 낮을 수록, 고용된 $Y_2O_3$의 양이 클 수록 증가하였다. 또한 25$0^{\circ}C$에서 aging 하면서 Y-TZP 분말의 등온상전이를 관찰한 결과, 입자크기 효과 및 고용효과에 의해 상온 안정화된 정방정상 지르코니아 입자에서는 aging 시 등온상전이가 일어나지 않고, 반면에 구속효과에 의하여 상온 안정화된 정방정상 입자에서는 등온상전이가 활발히 진행되었다. 등온상전이로 생성된 단사정상 입자의 내부에는 많은 쌍정과 미세균열들이 존재하였는데 이는 상전이시 변형에너지를 감소시키기 위한 것으로 사료되었다. Phase stability and isothermal phase transformation during gaging at 25$0^{\circ}C$ were investigated in yttria stabilized zirconia powders prepared from hydrolysis of zirconium isopropoxide. The stability of tetragonal phase at room temperature in zirconia powder was decreased with calcination temperature but increased with the addition of yttria content. During aging at 25$0^{\circ}C$ in humid atmosphere isothermal phase transformation occurred in tetragonal zirconia powder stabilized by constraint effect not by alloying effect and grain size effect. Many twins and microcrackings were found in transformed monomlinic zirconia particles.

제조방법에 따른 Y-PSZ 분말의 응집 및 소결특성

이종국,김환,황규홍,Lee, Jong-Kook,Kim, Hwan,Hwang, Kyu-Hong 한국세라믹학회 1985 한국세라믹학회지 Vol.22 No.5

Agglomeration of Y-PSZ and its related properties were studied. The ultrafine $ZrO_2$ powder containg 3 mol% $Y_2O_3$ was prepared by 1) coprecipitation method b) hot petroleum drying method c) sol-gel method and the characteristics of calcined powders and the microstructures of sintered body were observed. Powder prepared by the coprecipitation method was about 125$\AA$ in crystallite size and 0.1~1.0${\mu}{\textrm}{m}$ of intra-agglomerate pore size when calcined at $600^{\circ}C$ for 1 hour. because of small crystallite size and weak agglo merate strength resultant densification of sintered body was high. But above the temperature of 130$0^{\circ}C$ efflorescent phenomena due to anions attached to powder surface was observed. Powder prepared by hot petroleum drying method was 65$\AA$ in crystallite size and 1~10${\mu}{\textrm}{m}$ of intraagglome-rate pore size and it was observed that the agglemerates were formed during the calcining process. In this case despite of small crystallite size the rate of sintering was slow and the existing lenticular interagglomerate pore was not eliminated to the final stage of sintering. Powder prepared by sol-gel method showed solid agglomertes due to rapi dhydrolysis reaction. In this powder which involves strong solid agglomerates overall sintering rate was determined by the sintering between the agglomerates and therefore sinterability of powders made by sol-gel method was very poor.

국내외 학교시설 녹색 건축 인증제도의 비교분석에 관한 기초연구 -G-SEED와 LEED, BREEAM을 중심으로-

이종국,Lee, Jong-Kuk 한국교육녹색환경연구원 2014 교육·녹색환경연구 Vol.13 No.3

Proceeded with a research with basic data about the qualification standard improvement scheme about the environment school architecture in which a comparison analyze the specialized field of BREEAM system of LEED of the hit environment building qualification standard G-SEED of the domestic and U.S Green Building Counci evaluated with the certification system of the world top class and Building Research Establish, essential item, and mark distribution and weight in this study at this and which I hit with a domestic afterward. The school facility with a hub among the equipment receiving the hit environmental qualification standard, and the range of this research does LEED of the domestic green building certification system February is revised in 2013 G-SEED and which US and BREEAM in UK with a range. The way of the research checked the environment school building certification system and situation hit home and abroad, and a comparison analyze the division of the specialized field of each country qualification standard, essential item, and mark distribution and weight.

콜로이드 Ag 나노입자 합성시 계면활성제의 영향

이종국,최남규,서동석,Lee Jong-Kook,Choi Nam-Kyu,Seo Dong-Seok 한국재료학회 2005 한국재료학회지 Vol.15 No.5

Silver nanoparticles were synthesized by chemical reduction method from aqueous silver nitrate solution ana hydrazine as a reduction agent. The morphology, particle size and shape were dependent on the mixing method, reaction temperature and time, molar ratio of hydrazine and silver nitrate, the kind of surfactant, and the addition of surfactant. The stability of the colloidal silver was achieved by the adsorption of surfactant molecules onto the particle. Silver nanoparticles have a characteristic absorption maximum at 430 nm under UV irradiation. It was found that the colloid was nanometer m size and formed very stable dispersion of silver. The Ag nanoparticles obtained showed the spherical shape with the size range of 10-30 nm.

상압소결 $\beta$-SiC에 있어서 표면부에서의 액상집중과 미세구조의 변화

이종국,양권승,김환,Lee, Jong-Kook,Yang, Gwon-Seung,Kim, Hwan 한국세라믹학회 1996 한국세라믹학회지 Vol.33 No.8

The liquid-phase concentration from the interior to the surface region and its influence on the microstructural changes were investigated in pressureless sintered $\beta$-SiC Surface reaction-layer was formed by reaction of packing powder and volatile components on the surface during sintering which was induced the concentration of liquid-phase in the surface regions. The microstructural changes between the surface region and the interior were appeared in sintered specimen which was resulted from the difference of liquid-phase content during sintering. Microstructural changes were observd with the depth of about 250${\mu}{\textrm}{m}$ from he surface. The grain size and aspect ratio of SiC in the interior are larger than those in the surface region and the rate of transforma-tion of $\beta$-to $\alpha$-SiC during sintering is higher in the interior than that in the surface region.