http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
선형 평균스텝 양자화를 사용한 MPEG-2 비트율 제어
이두열,이근영 대한전자공학회 1997 電子工學會論文誌, S Vol.s34 No.9
We proposed a new bit-rate control algorithm to improve MPEG-2 video software encoder. Bit-rate Control plays an improtant role in picture quality of MPEG-2 encoder. To achieve better encoding performance such as controlling picture quality and using bity properly, we proposed a MPEG-2 bit-rate control algorithm using linear average Step-Size. Using a benchmark Program, we compared our algorithm with MPEG-2 Test Model 5. Our proposed algorithm showed better Bit-Rate Control with respect to used bits, picture quality.
와전류탐상검사를 이용하여 탐지 가능한 볼트홀 내부 균열 길이 연구
이두열,양성운,박종운,백세일,김순길,Lee, Dooyoul,Yang, Seongun,Park, Jongun,Baek, Seil,Kim, Soonkil 대한기계학회 2017 大韓機械學會論文集A Vol.24 No.2
물리모델과 기계학습방법을 이용한 모델지원탐지확률(MAPOD, Model-assisted Probability of Detection) 실험계획법과 운용 중 결함이 발생한 부품을 사용하여 탐지확률을 측정하는 방법을 연구하였다. 검사방법은 와전류탐상검사를 적용하였고 검사대상은 볼트홀 표면에 존재하는 피로균열이다. 모델 지원탐지확률을 이용한 결과 실험요인이 큰 폭으로 감소하였다. 몬테카를로(Monte Carlo) 시뮬레이션을 이용하여 시편 균열길이 측정의 불확실성을 탐지확률에 반영함으로써 사용 중 결함품을 사용하여 비파괴검사정비사의 기량검증을 수행할 수 있었다. In this study, the physics-based model and machine learning technique were used to conduct model-assisted probability of detection (MAPOD) experiments. The possibility of using in-service cracked parts was also investigated. Bolt hole shaped specimens with fatigue crack on the hole surface were inspected using eddy current inspection. Owing to MAPOD, the number of experimental factors decreased significantly. The uncertainty in the crack length measurement for in-service cracked parts was considered by the application of Monte Carlo simulation.
Al6061-T6 부식 특성에 미치는 표면 처리의 영향 연구
이두열(Dooyoul Lee),권혁준(Hyeok-Jun Kwon),김민생(Min-Saeng Kim) 대한기계학회 2020 大韓機械學會論文集A Vol.44 No.6
표면 처리가 Al6061-T6의 부식 특성에 미치는 영향을 연구하였다. 일반적으로 사용되는 크로메이트처리, 경질/연질 양극산화와 더불어 비교적 최근 개발된 타이타늄 플라즈마 전해산화를 적용하였다. 단면 및 표면 분석을 실시한 결과 플라즈마 전해산화법은 다공성 피막을 형성하였으며, 생성된 피막의 표면 거칠기는 비교 대상 중 가장 낮았다. 전기 화학 실험 및 부식 실험을 실시하여 부식 저항성을 확인하였다. 모재를 제외하고 크로메이트 처리가 가장 낮은 값을 나타내었고, 경질 양극산화가 가장 높은 값을 나타내었다. 플라즈마 전해산화된 시편의 분극 저항값은 연질 양극산화와 유사하였다. 부식 실험후 무게 감소는 경질 양극산화, 플라즈마 전해산화, 연질 양극산화 그리고 크로메이트 순으로 낮았다. The effect of surface treatment of Al6061-T6 on its corrosion characteristics was studied. In addition to conventional chromate conversion coating and hard and soft anodizing, a titanium plasma electrolytic oxidation (PEO) coating was applied on an Al6061-T6 substrate. Cross-sectional and surface analysis showed that PEO creates a porous layer. The surface roughness of PEO was the least among the compared surface treatments. Potentiodynamic and immersion tests were conducted to evaluate the corrosion resistance of each surface treatment. The linear polarization resistance was measured and PEO was found to have a higher resistance than chromate and soft anodizing. Immersion test results showed that the weight loss of the PEO sample was comparable with that of a soft anodized one.