http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오진우 한국소음진동공학회 2024 한국소음진동공학회 논문집 Vol.34 No.1
현대 사회에서 다양한 설비에 의한 소음으로 인해 소음관련 민원이 지속적으로 발생하고 있으며 점차 증가하고 있는 추세이다. 도심의 개발로 인해 주거지 또는 직장 등 생활공간 주변에서 이러한 소음 발생설비로부터 소음영향을 받는 정도 및 빈도가 증가하고 있고 이에 대한 적극적인 대책이 요구되는 상황에서 소음을 발생하는 사업장 및 공장으로부터의 소음영향성의 감소를 위해 다양한 방음장치가 적용되고 있다. 이 중 소음기와 방음루버는 팬, 공조설비 등 급/배기구를 통해 공기의 순환이 필요한 설비에 적용하는 대표적인 방음장치로 일반적으로 외부 케이싱과 스플리터로 구분할 수 있는데 스플리터는 다양한 길이와 형상으로 설계된다. 결과적으로 유동소음은 소음기와 방음루버의 설계안과 상관없이 시스템 풍량에 비례하여 증가하며 스플리터의 길이보다 형상에 더 큰 영향을 받는 것으로 측정되었다. In modern society, we are exposed to various noise environments. To avoid noise problems, various noise mitigation devices are designed and installed on noise generating facilities. A silencer and an acoustic louver are representative noise mitigation devices for the supply/exhaustion of equipment and the splitter inside the silencer and acoustic louver is designed at various lengths and shapes for the necessary performance. A test is conducted in six steps for various designs of the silencer and acoustic louver. As a result, there is a slight difference in each design but the flow noise is similar at the same step (velocity) as 35dB(A)~73dB(A). This means that the flow-noise is proportional to the system flow velocity. In the case of the acoustic louver, higher flow noise is generated compared to the silencer even if theflow velocity in the duct is low.
오진우,Nakjoong Kim 대한화학회 2010 Bulletin of the Korean Chemical Society Vol.31 No.1
In this work, we report on the characterization of six low-Tg poly[methyl-3-(9-carbazolyl) propylsiloxane] based photorefractive (PR) composites sensitized with poly(3-hexylthiophene) (P3HT) in different concentrations,ranging from 0.2 to 1 wt %. At 632.8 nm, photoconductivity, space charge field, refractive index modulation, and grating buildup time were measured versus external electric field. The photoconductivity was strongly dependent on the visible light absorption and mobility. The magnitude of space charge field was affected by the conductivity contrast σph/(σph + σd). The refractive index modulation increased with the magnitude of space charge field and the PR grating buildup speed increased with the photoconductivity.
무기체계 소프트웨어 기술변경 원인분석을 통한 개발단계 품질관리 강화 방안연구 - 8대 무기체계 중 기동화력분야 소스코드 관점으로
오진우,윤재형,김종규,류지선 한국산학기술학회 2022 한국산학기술학회논문지 Vol.23 No.7
When developing a weapon system, a limited development period and budget are given to prevent a defense forces vacuum and introduce the weapon system early to strengthen the defense forces. Therefore, engineering changes by design insufficiency and missing exception handling are increasing in the weapon system development. Currently, source-code related defects continue to increase in the mass production of weapon systems. Therefore, we propose a method to strengthen the quality management in the developmental stage of a source code in a land weapon system from 2021 by analyzing the causes of software engineering change in the source code. In particular, we try to identify the source-code related defects that occur in the mass production of the weapon system in advance by adding the source code review process linked to QCG to the mass production. The implementation of the proposed method showed the feasibility of source code quality management for weapon systems, which was not developed in the past. It is also expected that this quality management can contribute to the development of quality weapon system software in the future. 현재 무기체계 개발 시, 전력공백을 방지하고 체계 조기도입으로 인한 국방력 강화를 위해 제한된 개발기간 및 예산이 적용되고 있는 상황이다. 따라서 실제 설계 시 모든 운용환경을 반영하지 못한 설계내용이 포함되거나, 소스코드 상에서 개발자의 예외처리 누락 및 예기치 못한 운용자의 실수 등이 발생되고 있다. 그로 인하여 양산 이후 운용단계에서 문제점이 지속적으로 발생되며, 기술변경 역시 증대되고 있다. 현재 양산 이후 운용유지단계에서 발생되는 소프트웨어 기술변경 원인분석 결과, 구현단계에서 발생되는 소스코드 관점의 결함은 지속적으로 증가하고 있는 상황이다. 따라서 본 논문에서는 국방기술품질원에서 ‘21년도에 수행된 무기체계 기동화력분야 소프트웨어 기술변경 원인에 대한 데이터베이스를 구축하고, 기술변경 원인 분석을 통해서 소스코드 관점의 개발단계 품질관리 강화 방안을 제시한다. 기품원 개발단계 품질관리 활동인 QCG와 연계한 소스코드 리뷰 프로세스를 추가하여, 양산단계에서 주로 발생되는 결함을 조기 식별하고자 함이다. 위 강화방안을 통해 그동안 수행되지 않았던 소스코드 관점의 품질관리를 적용함으로써 향후 개발되는 무기체계 소프트웨어 품질 확보에 기여할 수 있음을 보인다.
오진우,최종완,Bich Thi Luong,김낙중 한국고분자학회 2010 Macromolecular Research Vol.18 No.1
This study examined the effects of poly(3-hexylthiophene) (P3HT) as a photosensitizer on the dynamic and steady-state photorefractive (PR) performance of polymeric composites. The performance was measured in terms of the magnitude and buildup speed of the PR grating. Absorption quenching was observed in a PR composite that was doped with P3HT/fullerene (C60). This absorption quenching was attributed to disordering of the P3HT chains, and charge transfer between P3HT and C60. The magnitude and buildup speed of the PR grating were strongly dependent on space charge formation, which was affected by visible light absorption and the hole mobility.
오진우,최종완,김낙중 한국고분자학회 2013 Macromolecular Research Vol.21 No.3
We report on a fast and efficient polymeric photorefractive (PR) device by using single-walled carbon nanotubes (SWCNTs) on indium-doped tin oxide (ITO) electrodes. In presence of SWCNTs, the magnitudes of photocurrent,space charge field, and refractive index modulation increased 56.9%, 20.3%, and 22.1%, respectively, due to enhanced charge separation and facilitative charge transport. The PR grating buildup speed of PR device with SWCNTs layers was three-and-a-half times faster than that without SWCNTs layers. The SWCNTs with layer structure provided an efficient electron-transfer matrix.