http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
송홍종,차건종,김덕줄,Song, Hong-Jong,Cha, Keun-Jong,Kim, Duck-Jool 대한기계학회 2000 大韓機械學會論文集B Vol.24 No.6
The emission in the exhaust gas from diesel engine is effected by the fuel spray characteristics. The spray of D.I. diesel engine impinges on a piston cavity and a cylinder wall. It is very important to know exactly the distribution and behavior of the spray inside cylinder. The objective of this study is to develop more accurate evaporation model. The EPISO code was used to analyze the flow characteristics in the engine. The Wakil model and the Faeth model are applied to the EPISO code to analyze the behavior of impinging spray. And also experimental and numerical analysis were carried out. The spray behavior characteristics were investigated by changing injection pressure, ambient pressure and temperature. The behavior of impinging spray was strongly effected by the change of ambient pressure and temperature. The effects of evaporation and rebounding droplet should be considered.
키토산의 처리가 소목(Caesalpinia sappan L.) 분말의 염색성에 미치는 영향
송홍종,이용현,김동청 중소기업융합학회 2021 융합정보논문지 Vol.11 No.6
본 연구에서는 소목(Caesalpinia sappan L.) 분말을 활용한 모발 염색의 최적 조건을 결정하였고, 키토산 처리가 소목 분말의 모발 염색성에 미치는 영향을 조사하였다. 소목 분말의 혼합비율, 염색시간 및 온도에 따른 염색성을 확인한 결과 소목 분말과 물의 비율을 1:3(w/w)로 하여 40℃에서 60분 동안 처리하 는 것이 모발 염색에 가장 효과적인 것으로 나타났다. 또한 키토산의 분자량, 처리 농도와 처리 순서가 소 목 분말의 염색성에 미치는 영향을 확인한 결과 저분자량(∼30 kDa)의 키토산을 1%(w/w)의 농도로 소목 분말 처리에 앞서 전처리를 하는 것이 염색성 향상 및 유지에 가장 효과적이었다. 결론적으로 모발 염색에 있어서 저분자량의 키토산은 매염제로서 소목 분말의 염색 효율과 유지력 향상에 크게 도움이 되는 것으로 판단된다. In this study, the optimal conditions for hair dyeing using sappan wood (Caesalpinia sappan L.) powder were determined, and then the effect of chitosan treatment on the hair dyeing properties of sappan wood powder was investigated. Treatment of sappan wood powder and water with the ratio of 1:3 (w/w) at 40℃ for 60 minutes was found to be the most effective to hair dyeing. In addition, the pretreatment of low molecular weight (∼30 kDa) chitosan at a concentration of 1% (w/w) prior to treatment with sappan wood powder effectively improved and maintained the hair dyeing properties of sappan wood. In conclusion, the low molecular weight chitosan is considered to be of great help as a mordant in improving the dyeing efficiency and retention of sappan wood powder in hair dyeing.
송홍종,차재상 한국인터넷방송통신학회 2010 한국인터넷방송통신학회 논문지 Vol.10 No.5
본 논문에서는 다가올 초고속 무선 서비스의 핵심 서비스 중의 하나로 부각되고 있는 UWB 무선통신 시스템에서 광대역 저출력 주파수 특성의 방사출력 측정방법에 대하여 연구하였다. UWB 시스템의 측정환경에서는 RMS 전계강도 측정, UWB PSD 측정, 검출 가능한 UWB 신호레벨, UWB 천이신호 수집 등에 대해서 언급하였다. 또한, CIDPR16-1에서 언급한 축력 측정법에 대해 분석하였으며 저 준위 e.i.r.p 복사 측정법에 대해 세부적으로 분석하였다. 마지막으로는 신호분석기를 이용하여 측정시의 고려사항에 대해 서술함으로써 UWB 시스템 상용화에 필요한 방사출력 측정에 필요한 내용을 마무리하였다. In this paper we analyse radiation measurement method for UWB wireless system of the wideband low power frequency characteristics. In the radiation measurement environment we discuss RMS electric field strength, UWB PSD , UWB detect signal level, UWB noise signal collection etc.. also, we discuss power measure method of the CISPR16-1, low level e.i.r.p radiation measurement method. lastly we analyse consideration problem for the signal analyser of the UWB system
The Impulse UWB Interference analysis on the Mobile Communication System
송홍종,박구만,차재상 한국통신학회 2010 韓國通信學會論文誌 Vol.35 No.11
Ultra wideband (UWB) technologies have been developed to exploit a new spectrum resource in substances and to realize ultra-high-speed communication, high precision geolocation, and other applications. The energy of UWB signal is extremely spread from near DC to a few GHz. This means that the interference between conventional narrowband systems and UWB systems is inevitable. However, the interference effects had not previously been studied from UWB wireless systems to conventional mobile wireless systems sharing the frequency bands such as Cellular CDMA and Korean PCS. This paper experimentally evaluates the interference from two kinds of UWB sources, namely a direct-sequence spread-spectrum UWB source and an impulse radio UWB source, to a Cellular CDMA and K-PCS digital transmission system. The average frame error rate degradation of each system are presented. From these experimental results, we show that in all practical cases UWB system can coexist with Cellular CDMA and K-PCS terminal without causing any dangerous interference