http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이종재료(알루미늄합금-강판)의 저항 점용접에 관한 연구
손병천,우승엽,이재범,최용범,장희석 대한용접접합학회 1997 대한용접·접합학회지 Vol.15 No.4
Resistance spot welding has been widely used in the sheet metal joining processes because of its high productivity and convenience. Recently, automobile industries are trying to replace partly steel sheets with aluminum alloy sheets. Among currently produced aluminum alloys, Al alloy sheets of Al-Mg-Si(6000 series) are being tested. Especially, 6000 series are the most probable substitute in view of strength and weldability. In this paper, an attempt was made to apply resistance spot welding to joining of dissimilar sheet metals (KS6383+SCPZn or KS6383+SHCP). An effort was made to balance heating rate in the Al alloy with that in the steel sheets by increasing electrode tip diameter. Although resistance spot welding of Al alloy sheet and sheet metals does not produce desirable nugget, it proved to have reasonable strength if optimal weld condition is found by tensile-shear strength and fatigue life test. Since spot weld joints in automobile are always experiencing repeated load, spot welding methodology proposed in this paper is found to be not suitable to automobile body manufacturing.
자기공명영상검사 시 폐쇄공포증 완화를 위한 굴절안경의 유용성 평가
전병천(Byeong-cheon Jeon),정성훈(Seong-Hun Jeong),이상현(Sang-hyeon Lee),손지혜(Ji-hye Son) 대한방사선과학회(구 대한방사선기술학회) 2018 방사선기술과학 Vol.41 No.5
Unlike the traditional Radiological examinations, Magnetic Resonance Imaging (MRI) does not cause any harm and high levels of Radiation to the human body. Furthermore, MRI is widely used owing to its ability to adapt to different situations. However, the MRI equipment creates noises from its mechanical parts, and its magnetic bore structure can cause anxiety and claustrophobia in patients. To relieve claustrophobia, commercial refraction glasses were provided to the participants in this study, and the changes in anxiety and claustrophobia were measured. The participants were 30volunteers with claustrophobia. To measure anxiety, the participants were asked to answer a Visual Analogue Scale (VAS) questionnaire. The physical markers of discomfort included perspiration on the forehead or hands (46.7%), mild frowning (30.3%), and leg shaking (40.1%). The subjective markers of discomfort included dizziness (2.85% in the men and 1.75% in the women). Although fear and anxiety levels were observed to be higher in the men, the difference was not significant. Hence, it was determined that both men and women felt discomfort (p >0.5). The fear coefficient was observed to decrease from 7.67 prior to wearing refraction glasses to 2.42 after wearing refraction glasses (p<0.000). In addition, use of refraction glass decreased MRI aversion from 1.97 to 1.03 (p<0.000). It can be inferred that refraction glasses are beneficial to patients undergoing MRI.
폐기물감량을 위한 폐차 해체 SYSTEM 개발 (액상류회수)
옥성현,하수현,김대성,이원배,손병천 한국자동차공학회 1999 한국자동차공학회 Symposium Vol.- No.-
국내 자동차 보유대수는 1997 년에 이미 1. 000 만대를 넘어섰으며 폐차대수는 96년 49만대. 97 년 58 만대로서 점점 증가하는 추세이다. 향후 2001 년에는 자동차 보유대수가 1.380 만대로 되고 페자동차 발생량도 82만대로 급격히 증가하여 페자동차 처리에서 발생되는 폐기물량도 증가될 것으로 예상됨에 따라 폐기물 처리에 대한 대용 기술개발이 절실한 시점이다.<br/> 사용이 끝난 자동차의 처리는 유용가능한 부품은 분리, 손질하여 중고품으로 재사용 (Reusing) 하거나 재료로 재활용 (Recycling) 하는데 국내 폐차장에서의 재료 재활용은 주 로 철, 비철 퉁 금속에 한정된 재활용만이 이루어지고 있다. 이 과정에서 발생되는 폐기물을 줄이기 위해서는 플라스틱, 고무, 윤활유 퉁 기타 재료에 대한 재활용이 이루어져야한다. 이보다 선결되어야 할 것은 재활용 재료로 활용되기 위한 해체작업의 단순화를 이루어 해체비용을 최대한 줄이는 것이다.<br/> 따라서 해체공정의 효율향상 및 안전화률 위해 라인화률 통한 작업자의 자세, 해체부품 이동 동율 충분히 고려한 해체설비를 갖춤으로써 폐기물감량을 위한 현실적인 해체가 가능하게 된다.<br/> 기아기술센터 환경연구실에서는 이러한 해체공정을 구축하고 실제 가동함으로써 해체에 대한 문제점 및 부품의 재활용 가능성율 정량적으로 판단하여, 해체효율화를 통한 폐기물 감량화률 도모하고, 향후에는 설계단계에서부터 해체가 쉽고 재활용이 용이한 제품개발을 목적으로 하고 있다.<br/> 본 논문에서는 현 폐차장에서의 해체공정을 파악하고 보다 많은 부품을 해체가능케하는 신 개념의 해체시스템을 소개하며 그중 제 l 단계인 액상류 최적회수 명가 및 동시회수 장치개발에 대하여 논하고자 한다.<br/>
수리 모형을 이용한 조선 산업에서의 블록 적치장 최적 운영 계획 도출
하병현(Byung-Hyun Ha),손정열(Jung-Ryoul Son),조규갑(Kyu Kab Cho),최병천(Byung-Cheon Choi) 한국경영과학회 2013 經營 科學 Vol.30 No.3
This paper studies the scheduling problem of storing and retrieving assembly blocks in a temporary storage yard. The objective is to minimize the number of relocations of blocks while the constraints for storage and retrieval time windows are satisfied. We present an integer programming model based on multi-commodity network flows, and the three revised models based on the properties of the problem. We show that the revised models are more efficient than the generic model through the numerical experiments.