http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
KS F 2545와 ASTM C 1260 시험법에 따른 알칼리골재 잠재가능성에 관한 연구
백철승,서준형,김영진,조계홍,김건기,이진영,Baek, Chul-Seoung,Seo, Jun-Hyung,Kim, Young-Jin,Cho, Kye-Hong,Kim, Kun-Ki,Lee, Jin-Young 한국자원리싸이클링학회 2020 資源 리싸이클링 Vol.29 No.2
Chemical experiment KS F 2545 and Physical experiment ASTM C 1260 has been accomplished to estimate the potential of alkali aggregate. Used for testing aggregate samples are forest aggregate and recycled aggregate which collected in Gangwon province Samcheok and Pyeongchang, Jeollabuk province Gimje and Kochang, and Gyeongsangnam province Goryeong. As the results of chemical experiment confirmed that if silicate rock and carbonate rock are mixed, reduction in alkalinity is increase. So it has been identified that case makes a disturb at the result of alkali aggregate reaction. In 9 out of the 62 aggregate samples check dissolved silica exceeding 100 mmol/ℓ. and mortar bar length increase rate confirmed that 5 of 9 chemical method aggregates were 0.1~0.2% and 2 aggregates were 0.2%. As a result of the alkaline aggregate reaction test using the chemical method and the mortar bar method, the aggregates showing alkali aggregate reaction are sandstone and tuff aggregates. Therefore, Alkali aggregate reaction tests are required to use clastic sedimentary rocks and volcanic pyroclastic rocks aggregates.
유동층보일러형 화력발전소의 석회석 활용 탈황기술 연구동향
백철승,서준형,안지환,한춘,조계홍,Baek, Chul-Seoung,Seo, Jun-Hoyung,Ahn, Ji-Whan,Han, Chon,Cho, Kae-Hong 한국자원리싸이클링학회 2015 資源 리싸이클링 Vol.24 No.5
청정석탄발전기술 중 하나인 순환유동층보일러(CFBC) 기술의 고도화에 따라 국내외 로내탈황 기술개발 현황과 국내외 유동층보일러용 석회석의 탈황특성 연구현황을 조사하였다. 석회석계 탈황제는 고온탈황특성이 우수한 원소 중 하나로 $850-950^{\circ}C$ 내외에서 최적의 탈황특성을 가지고 있다. 그리고, 탈황시험방법에 따라 흡수제 표면의 격막의 확산반응, 입자의 크기, 기공의 수량, 크기 및 구조에 의한 탈황공정의 효율성을 결정할 수 있다. 2015년 이후 대형 순환유동층형발전소의 본격적인 가동에 따라 석회석의 광상학적, 결정학적 특성 및 소성특성과 연계된 추가적인 연구가 필요한 것으로 사료된다. This study investigated that status of domestic and international furnace desulfurization and desulfurization characteristics of limestone for fluidized bed use depending on the technology for CFBC one of the CCPs. Limestone-based desulfurizing agent is one of the superior elements which are optimal at around $850-950^{\circ}C$ on high temperature desulfurization. And effectiveness of desulfurization process can be determined by the desulfurization experiment method such as diffusion reaction of the diaphragm of the absorber surface, the size of the particles, the pores of the quantity, size and structure. And, desulfurization efficiency depending on geological and crystallographic properties and calcination process of limestone needs additional research in the future.
리사이클링 원료를 사용한 건축용 3D 프린팅 기술 동향
백철승,서준형,조진상,안지환,조계홍,Baek, Chul-Seoung,Seo, Jun-Hyung,Cho, Jin-Sang,Ahn, Ji-Whan,Cho, Kye-Hong 한국자원리싸이클링학회 2018 資源 리싸이클링 Vol.27 No.1
3D 적층가공(3D Additive manufacturing, AM) 기술은 기존산업의 패러다임을 혁신하는 새로운 비즈니스 모델로 자리매김하고 있다. 2000년대 초 선보인 건축용 3D 프린팅(3D printed building) 기술 또한 미국과 유럽을 중심으로 기계/전자 기술과 연계하여 빠르게 발전하고 있다. 그러나 건축용 3D 프린터 시스템의 경우 기존 전통적인 건설공법에 사용되는 시멘트/콘크리트 원료 제품과는 다른 기계적 특성을 요구한다. 이에 따라 시멘트 산업과 자원리사이클링 산업에서 생산되는 소재원료의 활용도를 높이기 위해서는 건축용 3D 프린팅 기술의 특성을 반영하기 위한 소재가공 및 활용기술 개발, 새로운 물성평가 및 테스트 방법의 확보, 환경적 안정성과 관련된 장기간의 데이터베이스 확보가 필요하다.
백철승(Chul-Seoung Baek),서준형(Jun-Hyung Seo),조진상(Jin-Sang Cho),안지환(Ji-Whan Ahn),조계홍(Kye-Hong Cho) 한국세라믹학회 2019 세라미스트 Vol.22 No.2
The possibility of economic exchange with North Korea is increasing, but there is still a shortage of information of cement industry, which occupies the largest proportion of North Korean construction material industry. Therefore, this study researched the status of cement production facility management using satellite photographs of 16 cement factories in North Korea, and examined the operating status of North Korean cement industry by observing smoke discharged from the chimneys of the cement production facilities. When the satellite photographs were analyzed, it was observed that the monthly stack fog ratio of the North Korean cement factories was 55% in 2016, 60% in 2017 and nearly 65% in 2018. This demonstrates that the average operating ratio has been increasing continuously. However, the operation rate of the five major cement factories reaches the limit, actual cement production is estimated to have maintained the previous level or small increased.
발전소 비산재를 결합재로 활용한 로내탈황용 석회 흡수제의 탈황효율
서준형,백철승,조진상,안지환,윤도영,조계홍,Seo, Jun-Hyung,Baek, Chul-Seoung,Cho, Jin-Sang,Ahn, Ji-Whan,Yoon, Do-Young,Cho, Kye-Hong 한국자원리싸이클링학회 2018 資源 리싸이클링 Vol.27 No.3
국내 순환유동층보일러형 발전소에서 발생하는 석탄재의 재활용을 위해 석회석 미분말과 CFBC 비산재를 이용하여 0.2~0.4 mm 크기를 가지는 석회계 흡수제를 제조하였다. 석회계 흡수제에 소석회를 소량 혼합한 결과 칼슘실리케이트 성분이 입자 표면에 형성되어 강도가 향상되었으며, 탈황특성을 비교한 결과 상업적으로 사용되고 있는 로내탈황용 석회석보다 약 10% 정도 높은 전환율을 가진 것으로 나타나 탈황 흡수제로 활용 가능함을 확인하였다.
국내 순환유동층보일러 석탄재의 희토류 분포 특성 및 평가
김영진,백철승,서준형,최문관,조계홍,안지환,Kim, Young-Jin,Baek, Chul-Seoung,Seo, Jun-Hyung,Choi, Moon-Kwan,Cho, Kye-Hong,Ahn, Ji-Whan 한국자원리싸이클링학회 2018 資源 리싸이클링 Vol.27 No.6
The rare earth elements (REE) contents in coal ashes generated from domestic circulating fluidized bed combustion (CFBC) were identified for evaluating the exploitation possibilities for recovering rare earth elements. Total REE contents for all of the samples in this study ranged from 82.2 ~ 311.7 ppm, much lower than the 403.5 ppm given on the average value of world coal ash. As a result of analysis using REE concentration and Outlook coefficient, six types of coal ashes falls in the unpromising area (I). These results suggest that it is difficult to recover rare earth element from coal ashes at this stage. It has been confirmed that to recover rare earth elements in coal ashes, research on the pretreatment and concentration process for critical REE is requirement.