RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        가상현실(VR) 테크놀로지 활용 체육수업에 대한 예비체육교사의 요구분석

        백근호,이현석 중앙대학교 학교체육연구소 2022 Asian Journal of Physical Education of Sport Scien Vol.10 No.5

        As a qualitative study, the purpose of this study was to analyze the demands of pre-service PE teachers for the use of VR(virtual reality) technology in PE and to suggest the direction to go forward in order to apply VR to PE. To this end, focus group interviews were conducted based on the VR simulation experiences of the study participants, and factors to consider the educational use of VR and requirements for the field were examined in depth. The data collected through the interview were derived into three categories and six subcategories, and the results are as follows. First, the requirements for the PE academia were the development of PE curriculum and various PA programs using VR. Second, the requirements for the educational field were to find teaching and learning methods using VR and derive guidance plans for linking classes. Third, the requirements of the government and the Office of Education were not only to develop common guides and disseminate guidelines, but also to support more dissemination and seamless management systems in terms of VR technology. In order to realize these requirements, all educational communities should cooperate and make efforts to revitalize school sports using VR and realize enjoyable PE classes. 본 연구는 질적 연구로서 가상현실(VR) 테크놀로지의 체육수업 활용에 대한 예비체육교사의 요구를 분석하고, 가상현실을 체육교과에 적용하기 위해 앞으로 나가야 할 방향성을 제시하는 데 그 목적이 있다. 이를 위해 연 구 참여자들의 가상현실 시뮬레이션 체험을 바탕으로 포커스 그룹 인터뷰를 실시하였고, 가상현실의 교육적 활 용에 대한 고려 요소 및 현장에 필요한 요구사항을 심층적으로 살펴보았다. 인터뷰를 통해 수집된 자료는 3개 의 범주와 6개의 하위범주로 도출되었고, 그 결과는 다음과 같다. 첫째, 체육학계에 바라는 요구사항은 가상현 실을 활용한 체육교과 프로그램 개발과 다양한 신체활동 프로그램 개발이다. 둘째, 교육현장에 바라는 요구사 항은 가상현실을 활용한 교수학습방법 모색 및 수업 연계를 위한 지도방안 도출이다. 셋째, 정부 및 교육청에 바라는 요구사항은 공통된 지도서를 개발하고 가이드라인을 보급하는 것뿐만 아니라, 가상현실 시스템 측면에 서 보다 많은 보급 및 원활한 관리 시스템 지원이다. 이러한 요구사항의 실현을 위해 가상현실을 활용한 학교 체육의 활성화와 즐거운 체육 수업이 실현될 수 있도록 교육 공동체 모두가 협력하고 노력해야 할 것이다.

      • Metformin에 의해 발생한 H4IIE 간암세포의 세포사멸 과정에서 자가포식의 역할

        백근호,박덕배,Baek, Keunho,Park, Deokbae 제주대학교 의과학연구소 2020 The Journal of Medicine and Life Science Vol.17 No.2

        Metformin, a predominantly prescribed anti-diabetic drug for decades, has gained new insights for its anti-tumor activity in a variety of cancer cells. Our previous studies also showed the obvious pro-apoptotic activity of metformin and the underlying action mechanisms in hepatocellular carcinoma cells. Together with apoptosis, autophagy is a crucial intracellular process to determine the survival or death of cells under some stressful environments. The present study aimed to determine the role of autophagy in metformin-induced death of H4IIE hepatocellular carcinoma cells. Metformin blocked the formation of autophagosome and the expression of LC3A, generally described as a biomarker of autophagy. Inhibition of AMPK reversed the metformin-induced blockade of autophagy. Antioxidant (NAC) suppressed the metformin-induced cell death but not affected LC3A. The inhibition of protein kinase C totally restored the metformin-suppressed expression of LC3A. In summary, our present study suggests that autophagy is an anti-apoptotic player in metformin-induced apoptosis in H4IIE cells.

      • KCI등재

        연소 전 조건에서 음이온이 Sulfite계인 이온성 액체의 CO₂ 흡수 특성

        백근호(Geun Ho Baek),장현태(Hyun Tae Jang),차왕석(Wang Seog Cha) 한국산학기술학회 2021 한국산학기술학회논문지 Vol.22 No.3

        본 연구는 지구 온난화 현상의 주원인인 이산화탄소의 제거를 목적으로 최근에 주목 받고 있는 물질인 이온성액체를 실험실 규모로 제조하였다. 음이온이 Sulfite계인 이온성 액체의 이산화탄소 흡수능, 초기흡수속도 그리고 재생성을 조사하기 위하여 기-액 흡수평형장치를 이용하여 연구하였다. 그 결과 음이온이 Sulfite계인 이온성액체 중 높은 흡수능을 갖는 이온성액체는 음이온이 ethyl sulfite인 경우이며, 특히 [beim] ethyl sulfite의 경우 흡수평형압력이 22 bar인 조건에서의 흡수력은 1.1 mol CO₂/mol IL로 가장 높은 흡수력을 나타냈다. 재생성 연구에서 음이온이 Sulfite계인 이온성액체는 모두 재생후의 흡수력이 약 7%정도 감소하였으며, 이로부터 재생성이 우수함을 알 수 있다. 점도 감소를 목적으로 두 종류의 희석제를 첨가하였을 때 희석제는 단지 이온성액체의 흡수력을 감소시키는 희석효과로 작용하였으며 희석제 첨가에 따른 흡수력의 증가는 없었다. 흡수실험에 따른 점도변화의 정도를 조사하기 위해 흡수반응 전과 흡수실험 후 재생한 시료의 점도를 측정하였으며, 실험결과 흡수실험 후 시료의 점도가 흡수실험 전보다 약 8% 정도 감소하는 경향을 보였다. 그러나 흡수제 합성은 1단계에서 이루어지며 사용되는 원료물질 또한 저렴한 장점이 있으며 흡수능에서는 우수한 재생성과 높은 안정성을 가지고 있음을 알 수 있었다. In this study, ionic liquids were synthesized to remove carbon dioxide (CO₂) on a laboratory scale. The vapor-liquid absorption equilibrium device (VLE) was used to investigate the carbon dioxide absorption capacity. In the regeneration study, the absorption capacity after regeneration was reduced by approximately 7% for all ionic liquids, in which the anion was sulfite-based, showing excellent regeneration. Ethyl sulfite showed the highest absorption capacity of CO₂ among the ionic liquids based on the sulfite anion. In particular, the absorption capacity of [beim] ethyl sulfite was 1.1 mol CO₂ / mol IL at an absorption equilibrium pressure of 22 bar. In the regeneration study, the absorption capacity after regeneration was reduced by approximately 7% for all ionic liquids, in which the anion was sulfite-based, from which regeneration is outstanding. After the absorption experiment, the viscosity of the sample tended to decrease by approximately 8% compared to that before the absorption experiment. On the other hand, the absorbent was synthesized in the first step. Moreover, the raw material used is also inexpensive and has excellent reproducibility and highly stable absorbent capacity.

      • KCI등재

        공정 조건에 따른 톨루엔 및 MEK에 대한 ACF의 흡·탈착 특성

        백근호(Baek, Geun-Ho),김정수(Kim Jeong-so),장현태(Jang, Hyun-Tae),차왕석(Cha, Wang-Seog) 한국산학기술학회 2011 한국산학기술학회논문지 Vol.12 No.6

        휘발성 유기화합물인 저 농도의 MEK와 톨루엔을 사용하여 고정층 반응기에서 활성탄소섬유의 흡착 및 탈 착특성을 조사하였다. 활성탄소섬유의 성능은 평형흡수량, 평형에 도달하는 시간, 그리고 탈착효율로 파악하였다. 다 양한 실험을 통해 흡착공정에 있어 중요한 공정변수인 유입가스농도, 유량, 수분함량, 흡착제 주입량에 대한 영향을 연구하였다. 흡착층의 온도, 유량 그리고 유입가스농도가 증가할수록 파과시간이 감소하였다. 그리고 흡착제의 충전높 이가 증가할수록 파과시간은 길어짐을 알 수 있었다. MEK와 톨루엔으로 흡착된 활성탄소섬유는 일정속도 가열과정 을 통해 만족스럽게 재생되었으며 두 휘발성 유기화합물 중 MEK가 150℃이하의 온도에서 훨씬 손쉽게 재생됨을 알 수 있었다. Adsorption/desorption characteristics of low concentration methylethylketone(MEK) and toluene vapors in beds packed with activated carbon fibers(ACF) was investigated. Performance of ACF adsorption was characterized by the equilibrium capacity, time to reach equilibrium and desorption efficiency. Experiments were carried out to define the effect of operation variables, such as feed concentration, flow rate, moisture content and bed height. The breakthrough time was shorten with the increase of temperature, flow rate and feed concentration. In addition, an increase of packed height of adsorbents lengthen the breakthrough time. The ACF loaded with MEK and toluene was satisfactorily regenerated by programed heating. It is observed that MEK is more easily removed than toluene at below temperature of 150℃.

      • KCI등재

        ACF를 이용한 휘발성 유기화합물(VOCs)의 흡착/탈착 특성

        백근호(Baek, Geun-Ho),김정수(Kim Jeong-so),장현태(Jang, Hyun-Tae),김형완(Kim, Hyeong-Wan),김형주(Kim Hyung-Ju),차왕석(Cha, Wang-Seog) 한국산학기술학회 2011 한국산학기술학회논문지 Vol.12 No.5

        기존에 주로 사용되었던 활성탄을 대체할 수 있는 활성탄소섬유를 이용하여 휘발성 유기화합물질의 흡·탈착 특성을 연구하였으며, 고정층을 이용하여 흡착 및 파과특성을 조사하였다. 활성탄소섬유중 ACFJ의 경우가 활성탄에 비하여 약1.15배 높은 흡착량을 보였으며, 흡착층의 온도가 증가함에 따라 파과시간 및 흡착량은 감소하였다. 또한 활 성탄의 경우 약 99%까지 탈착하는데 20분이 소요되었으며, 활성탄소섬유의 경우 약 99% 탈착되기까지 5분이 걸려 활성탄소섬유가 약 4배 빠르게 탈착됨을 알 수 있었다. We investigated the adsorption/desorption property of volatile organic compounds(VOC) by using activated carbon fibers(ACF) instead of activated carbon(AC) which is conventionally used. The adsorption behavior of the fixed bed and the breakthrough characteristics were also studied. As a result, ACFj showed 1.15 times higher adsorption amount as compared to AC. The breakthrough Point and adsorption amount of VOCs were decreased with the increase of temperature. In the case of AC, desorption time having 99% removal efficiency was about as minutes, but that of ACF was about 5 minutes at same condition.

      • KCI등재

        연소전 조건에서 물리흡수제를 이용한 이산화탄소 흡수특성

        백근호(Baek, Geun-Ho),유승한(You, Seung-Han),차왕석(Cha, Wang-Seog) 한국산학기술학회 2010 한국산학기술학회논문지 Vol.11 No.11

        본 논문에서는 주요 온실가스인 이산화탄소를 고압 환원 분위기인 연소전 조건에서 회수하기 위해 물리흡수 제인 DMSO, Sulfone, PEG를 이용하여 이산화탄소 흡수특성을 조사하였다. 회분식 기-액 평형반응기를 이용하여 흡수 반응온도 및 압력에 따른 이산화탄소 용해도와 물리흡수제의 재생성, 그리고 초기흡수특성을 연구하였다. 실험결과 PEG가 이산화탄소 용해도 및 초기 흡수능력이 가장 우수하였다. 그리고 PEG를 비롯한 물리흡수제가 다양한 흡수반 응온도 및 압력에서 우수하게 재생됨을 확인할 수 있었다. In this study, CO₂ absorption properties at high pressure condition that can apply pre-combustion CO₂ capture were investigated for physical sorbent such as PEG, DMSO, and Sulfone. The CO₂ Solubility, regeneration, and initial absorption rate with temperature and pressure were measured using batch type stirred cell contactor. The PEG showed the highest CO₂ solubility and initial absorption rate. It can be found that all the physical sorbents used in this experiments were almost completely regenerated at various temperature and pressure.

      • SCIESCOPUSKCI등재

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼