http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유동층에서 밀도가 다른 이성분 입자계의 flotsam 의 유출
차왕석,도동섭,장현태 한국화학공학회 1996 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.34 No.1
밀도차이가 있는 이성분계를 대상으로 jetsam의 입도분포에 따른 flotsam입자의 유출특성을 연속식 유동층에서 고찰 하였다. 본 실험에서 jetsam으로는 모래를 사용하였고, flotsam으로는 PMMA(poly methyl metacrylate)를 사용하였다. Jetsam의 입도분포에 따른 flotsam의 유출속도, 유출입자의 입도분포, 층내 압력요동특성치를 측정하였는데, flotsam 입자의 비산 유출은 jetsam입자의 입도분포에 크게 영향을 받음을 알 수 있었으며 이러한 결과를 이용하여 jetsam의 입도분포를 조절하므로써 미세입자의 유출을 일부 제어할 수 있었다. Jetsam과 flotsam입자들의 입도분포에 따라 유동층의 유동화 특성이 크게 달라지며 이러한 유동화 특성은 압력요동 특성치인 표준편차로써 해석할 수 있었다. The elutriation characteristics of flotsam for the size distribution of jetsam were investigated in continuous binary system with different density in a fluidized bed. In a fluidized bed of sand and PMMA(poly methyl metacrylate), sand was used as jetsam and PMMA as flotsam. Elutriation rate of flotsam, size distribution of elutriated particles and pressure fluctuations were measured for the size distribution of jetsam and elutriation rate of flotsam depended largely on the size distribution of jetsam. Using these results, it was found that elutriation of fine particles was partially reduced by controlling site distribution of jetsam. Fluidization characteristics were greatly influenced by the size distribution of jetsam and flotsam and these characteristics could be interpreted with standard deviation of pressure fluctuations.
휘발성유기화합물의 종류에 따른 ACF(Activated Carbon Fiber)의 흡착특성
차왕석,김정수 한국공업화학회 2005 응용화학 Vol.9 No.1
One of the most important technical issues of recent years is the effective and economical removal of Volatile Organic Compounds (VOCs) in air. The present study examined the adsorption and desorption characteristics of common and toxic VOCs including toluene and MEK First of all, the adsorption equilibrium capacity as a function of initial VOC's concentration, water vapor content, temperature, and flow rate was investigated in a packed bed reactor.
압력변화 특성치를 이용한 역청탄의 수소첨가 가스화반응 특성 연구
차왕석,백일현,박상도 한국공업화학회 2004 공업화학 Vol.15 No.1
110 mL 부피를 갖는 회분식반응기를 이용하여 수소첨가 가스화반응에서 석탄의 전환효율 향상에 관한 연구를 실시하였다. 실험에 사용한 석탄은 호주 노보산 유연탄이었으며 주 생성가스인 H_(2), CH_(4), CO, CO_(2) 그리고 H_(2)O의 조성은 GC를 이용하여 정량적으로 분석하였다. 수소가스의 압력감소 속도는 기상물 생성속도와 밀접한 관계가 있었으며, 이러한 사실은 전환율변화의 결과를 통해 확인할 수 있었다. 탄소전환율과 기상물 생성속도는 다양한 온도와 압력범위에서 측정되었으며 기상생성물 중의 메탄함량과 전환율은 온도와 압력증가에 따라 증가하였다. 일정수준까지의 수분첨가는 반응을 촉진시키나 일정수준이상에서는 반응을 억제함을 알 수 있었다. 담지된 모든 촉매가 반응효율 향상에 효과가 있는 것이 아니라 담지된 촉매와 석탄의 형태에 따라 상당한 차이가 발생하였으며, 유연탄을 사용한 수소첨가 가스화반응에서 최적의 촉매는 K_(2)CO_(3)이었다. The enhancement of carbon conversion has been studied in hydrogasification of coal in a small batch reactor (reactor volume: 110 mL). Novo coal from Austrailia was selected for the experiments. The product gas composition was determintd quantitatively by GC for H_(2), CH_(2), CO, CO_(2) and H_(2)O. It was found that pressure decrease rate of hydrogen gas was closely related to rate of gas production. This result was confirmed by the change of carbon conversion with time. Carbon conversion and gas production rate were measured over a various range of temperature and pressure. The methane content of gas products and carbon conversion rise with increase of temperature and pressure. The addition of water activates hydrogasification reaction until the proper level of water amount, but the water of the excess level inhibits the reaction. In case of loading of catalysts. all catalysts loaded to the coal did not give a positive effect in hydrogasification. but the catalytic effect depends on type of catalyst metals and coal. In the present hydrogasification of bituminous coal. K_(2)CO_(3) catalyst was found to be the best.
ABS계 플라스틱의 저온열분해 및 액상생성물 분포 특성
차왕석(Cha, Wang-Seog),장현태(Jang, Hyun-Tae) 한국산학기술학회 2008 한국산학기술학회논문지 Vol.9 No.4
열중량반응기와 미분반응기를 이용하여 ABS의 열분해 및 생성물분포 특성을 연구하였으며 미분반응기를 이용한 실험의 열분해온도는 400 ~ 450℃이었다. 각 상의 열분해생성물의 수율은 무게측정을 통해 얻었으며 액상생성 물의 탄소수분포는 GC-SIMDIS 방법을 통해 측정하였다. 열중량분석실험에서는 측정할 수 없었던 다량의 고상잔류물의 생성을 회분식 미분반응기실험을 통해 확인할 수 있었다. 반응온도와 시간이 증가할수록 액상생성물의 수율과 평균분자량은 감소하였으나 액상생성물 중의 스티렌모노머의 생성은 두드러지게 증가하였다. ABS 열분해 반응에서 말단절단의 속도계수인 활성화에너지 값은 54.1kcaℓ/mole이었다. Characteristics of pyrolysis and liquid product distribution of ABS plastics have been studied in the thermogravimetric(TG) reactor and bomb microreactor. Pyrolysis reactions were performed at temperature 400~ 450℃ and yield of each pyrolytic product was obtained by the weight measurement method. The molecular weight distributions of liquid products were determined by the GC-SIMDIS method. It was observed that solid residue which could not be detected in the thermogravimetric experiments was significantly formed in the batch-type microreactor. It was found that the yield and average molecular weight of liquid products were decreased with the increase of reaction temperature and time, but the formation of styrene monomer was significantly increased. The chain-end scission rate parameters were determined to be 54.1 kcaℓ/mole for ASS by the Arrhenius plot.