http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
하악 편측 소수 잔존치를 갖는 환자에서 임플란트 지지 가철성 국소의치 수복 증례
박지산,이근우,이용상,방주혁,장희원,김성아 大韓齒科補綴學會 2022 대한치과보철학회지 Vol.60 No.1
In removable partial dentures, abutment teeth are essential for support, maintenance, and stability of partial dentures, and are an important factor in the fabrication of functional dentures. If the number of periodontally sound abutments is sufficient and they are located on both sides, it will be easy to manufacture functional dentures with good support, maintenance, and stability. But on the contrary, if the number of teeth is insufficient or if they are located on one side, it is biomechanically disadvantageous and relatively difficult to make functional denture. On the other hand, recently, implant-supported removable dentures, which reinforce the three elements of maintenance, support, and stability by using implant surveyed crown, have been frequently selected as treatment plans. In particular, by adding an implant surveyed crown when only a small number of residual teeth remain, mastication efficiency, esthetics, patient comfort, and pronunciation can be improved. In this case, bilateral posterior extension partial denture was fabricated using implant surveyed crown as abutments by placing implants in the premolars area opposite to the residual tooth unilaterally in the mandible. As a result, the asymmetry of the abutment was resolved, and the maintenance and stability of the denture was achieved. 가철성 국소의치에서 지대치는 국소의치의 지지, 유지, 안정에 필수적으로, 기능적인 의치제작의 중요한 요소이다. 치주적으로 건전한 지대치가 충분하고 양측으로 위치할 경우 기능적인 의치 제작이 용이 하겠지만, 지대치가 부족하거나 편측에 위치하는 경우에는 생역학적으로 불리하여 기능적인 의치를 만들기가 상대적으로 어렵다. 한편, 최근에는 임플란트 서베이드 크라운을 이용해 지지, 유지, 안정 세 요소를 보강하는 임플란트 지지 국소의치가 치료 계획으로 많이 선택되고 있다. 특히, 소수 잔존치만 남은 경우에 임플란트 서베이드 크라운을 추가함으로써 저작 능률, 심미, 환자의 편안감, 발음의 개선 등을 얻을 수 있다. 본 증례는 하악에 편측 소수 잔존 지대치를 갖는 환자에서 반대편 소구치부에 임플란트 서베이드 크라운을 추가하여 양측성 후방연장 국소의치를 제작하였다. 지대치의 비대칭성을 해소하였고, 환자와 술자 모두 만족하는 결과를 얻었기에 본 증례를 보고하는 바이다.
Ni-Fe 합금도금의 기계적 성질에 미치는 Fe 의 영향
박지산,한재호,황운석,장시성,정래형,남기홍 대한금속재료학회 1999 대한금속재료학회 학술대회 개요집 Vol.1999 No.1
N/A N/A
가중치법을 이용한 SWE-SM(Slipring-less Winding Excited Synchronous Machine)의 다목적 최적설계
박지산(Ji-San Park),변진규(Jin-Kyu Byun) 한국자기학회 2022 韓國磁氣學會誌 Vol.32 No.1
SWE-SMs (Slipring-less Winding Excited Synchronous Machines) have low price and sturdy rotor structure, and there are ongoing researches to use them for the drive units of EVs (electric vehicles) and e-Mobility. In this paper, the multi-objective optimization of an SWE-SM is investigated in order to improve its torque characteristics. The torque and back EMF (electromotive force) of an SWESM are calculated and analyzed using finite element simulations and Arkkio’s method considering nonlinear B-H curve of the core. In order to increase the average torque and decrease the cogging torque at the same time, the multi-objective optimization of SWE-SM is performed using the weighted sum method. Various ratios of the weighting factors of the multi-objective function are tested and the optimal solutions are analyzed to check the uniformity of the Pareto optimal points. The results show that the average torque and the cogging torque of an SWE-SM can be optimized effectively by adjusting the ratio of the weighting factors according to the preference set by the designer.