http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박재성,허기무,윤성훈,문윤재,이재헌,Park, Jae-Seong,Heo, Ki-Moo,Yoon, Sung-Hoon,Moon, Yoon-Jae,Lee, Jae-Heon 한국플랜트학회 2014 플랜트 저널 Vol.10 No.2
본 연구에서는 고온 고압 배관용 단조밸브 용접부의 품질확보를 위하여 단조밸브 제작현장에서 활용할 용접후열처리의 유지시간 및 유지온도를 연구했다. ASTM A182 F92 재료를 단조밸브의 용접부에 해당되는 밸브 끝단부 및 누설방지용접부와 동일한 형상의 두께 1 inch 쿠폰으로 가공하고, 쿠폰을 가스 텅스텐 아크용접(GTAW: Gas Tungsten Arc Welding) 방법으로 완전용입 용접하여 시편을 제작했다. 용접부 호칭두께가 1 inch인 시편을 $705^{\circ}C$, $735^{\circ}C$, $750^{\circ}C$, $765^{\circ}C$, $795^{\circ}C$ 및 $825^{\circ}C$에서 1시간 유지하여 용접후열처리를 실시(Group 1)하였다. 그리고 용접부 호칭두께가 1 inch인 시편 3개를 $735^{\circ}C$에서 30분, 1시간 및 2시간으로 달리 유지(Group 2)하여 용접후열처리를 실시하였다. 다른 유지시간과 유지온도에 따른 경도의 변화를 관찰하기 위하여 모재부, 열영향부 및 용착금속부에서 경도를 측정하였다. 본 실험의 결과에 따라, 1 inch당 1시간 온도를 유지할 경우는 용접후열처리가 $750^{\circ}C{\sim}765^{\circ}C$에서 수행되어야 바람직한 것으로 확인되었다. 단조밸브 제작규격에서 요구하는 최소 유지온도 보다 $5^{\circ}C$가 높은 $735^{\circ}C$에서 1 inch당 1시간 유지할 경우에 요구된 경도 값을 만족하지 못하여, 요건보다 긴 시간인 1 inch당 2시간 용접후열처리 시 경도 값을 만족하는 것으로 확인되었다. 또한 용착금속부의 조직은 템퍼드-마르텐사이트 조직으로 확인되었다. Coupons which have same figure as weld joint of the forged steel valves and 1 inch nominal weld thickness were manufactured using ASTM A182 F92 material. After welding with GTAW method, the welded specimens have been post-weld heat treated at $705^{\circ}C$, $735^{\circ}C$, $750^{\circ}C$, $765^{\circ}C$, $795^{\circ}C$ and $825^{\circ}C$ for 1 hour per 1 inch nominal weld thickness each (Group 1) to evaluate characteristics of welds based on various holding temperature. Indeed, 3 welded specimens were post-weld heat treated for 30 minutes, 1 hour and 2 hour (Group 2) at $735^{\circ}C$ to evaluate characteristics of welds based on various holding time. Hardness values were measured at the weld metal, heat affected zone and base metal to observe hardness change depending on the condition. As a result of the evaluation, appropriate holding temperature for PWHT is proved as $750^{\circ}C$ and $765^{\circ}C$ for 1hour per 1 inch nominal weld thickness. Indeed, holding for 1 hour per 1 inch nominal weld thickness was insufficient for PWHT effect when the holding temperature was at $735^{\circ}C$. The microstructure of post-weld heat treated weld metal was determined as tempered-martensite structure.
조립토 입도분포곡선의 프랙탈차원을 이용한 투수계수의 예측
박재성,장병욱,손영환,김성필,Park Jae-Seong,Chang Pyoung-Wuck,Son Young-Hwan,Kim Seong-Pil 한국농공학회 2006 한국농공학회논문집 Vol.48 No.4
Since particle size distribution curves are useful to estimate permeability of soil, many formulae for permeability coefficient (k) have been published using the parameter from the curves and factors, such as grain size, particle shape and void ratio of soils. However, the parameters such as $C_c,\;C_u$ and $D_n$ derived from only some discrete points on the curve are insufficient to represent the whole gradation. In this paper fractal dimension which is quite new concept and known to be able to represent the entire curve of particle size distribution is employed for the parameters. An empirical formula of permeability coefficient has been developed with fractal dimension and percent of finer than 0.075 mm. The formula developed from this study has confirmed its effectiveness by a series of laboratory tests and comparison to other published formulae. It is found that permeability coefficient is proportional to fractal dimension and inversely proportional to percent of fines.
${Er_2}{O_3}$첨가가 $BaTiO_3$계 내환원성 X7R 재질의 유전특성에 미치는 효과
박재성,황진현,한영호,Park, Jae-Seong,Hwang, Jin-Hyeon,Han, Yeong-Ho 한국재료학회 2001 한국재료학회지 Vol.11 No.1
Ni 전극을 사용하는 $BaTiO_3$계 내환원성 X7R 조성에서 $Er_2$$O_3$ 첨가가 유전특성에 미치는 영향에 대하여 환원성 분위기에서 연구하였다. $MnO_2-MgO$가 첨가된 내환원조성에서 첨가량이 조절된 $Er_2O_3$의 복합첨가로 유전율의 온도안정성이 향상되어 X7R 규격을 만족시켰으며 2,970 이상의 상온 유전상수와 1.0% 이하의 유전손실율이 관찰되었다. $Er_2O_3$가 3.0 mol% 이상으로 과량 첨가되었을 경우 유전체의 온도특성은 향상되었으나 상온 유전상수가 현저히 감소하였다. 다른 첨가조성(1.5 mol% $Er_2O_3$2.0 mol% MgO)이 고정될 때 TCC곡선은 $MnO_2$첨가량이 증가함에 따라 시계방향으로 회전하였으며, 온도안정성을 향상시켰다. Effects of $Er_2O_3$ addition on the dielectric properties of non-reducible $BaTi_3$-based X7R dielectrics with Ni electrode have been studied in reducing atmosphere. X7R with moderate temperature-dependence was developed after addition of $Er_2O_3$ with $MnO_2-MgO$; room-temperature dielectric constant and dissipation factor were >2900 and < 1.0%, respectively. The addition of $Er_2O_3$ greater than 3.0 mol% improved the temperature dependence of dielectric properties, but a significant decrease of the dielectric constant at room-temperature was observed. The TCC curves rebated clockwise with increasing MnO$_2$ content at a given additive system, 1.5 mol% $Er_2O_3$ and 2.0 mol% MgO.
화재 발생 시 IoT센서 기반 화재대피 시스템 제작 및 분석
박재성(Jae-Seong Park),윤동준(Dong-Jun Yun),이진우(Jin-Woo Lee),김도균(Do-Kyun Kim),권준형(June-Hyung Kwon),백지원(Ji-Won Baik),노유진(Yu-Jin Noh),이인수(In-Soo Lee) 한국정보기술학회 2020 Proceedings of KIIT Conference Vol.2020 No.10
현재 화재대피시스템에서는 비상구 유도등으로 표시되는 고정된 대피경로는 화재가 진행되는 상황에서 안전한 대피경로를 제공하지 못한다. 관련 연구에서는 센서를 이용하여 화재현장상황을 인지하고 알고리즘을 이용하여 화재상황 별 대피경로를 안내하는 방법을 제시했었다. 본 논문에서는 더욱 빠르게 대피경로를 탐색하기 위해 Dynamic Programming기법을 적용한 새로운 화재대피 알고리즘을 제안하였다. 제안한 알고리즘에서는 IoT센서를 이용해 화재 현장상황을 인식하며 MQTT통신으로 안전한 대피경로를 유도할 수 있다. In the current fire evacuation system, a fixed evacuation route marked by a escape lights do not provide a safe evacuation route in the event of a fire. A related study suggested a method for guiding evacuation routes through algorithms by recognizing fire situation using sensors. In this paper, a new fire evacuation algorithm applying Dynamic Programming is proposed to provide the evacuation route faster. The proposed algorithm uses IoT sensors to recognize fire site conditions and to induce safe evacuation routes through MQTT communication.
박재성 ( Park Jae Seong ),김광수 ( Kim Gwang Su ),이호성 ( Lee Ho Seong ) 한국복합재료학회 2003 Composites research Vol.16 No.6
음향방출 신호를 측정하면 운용 중에 구조물 내부의 파손 발생이나 진전 시점을 측정할 수 있는 장점이 있다. 본 연구에서는 보강된 복합적층 패널의 압축시험에서 발생하는 음향방출 신호를 측정하여 누적 신호분포와 주파수 특성을 분석하였다. 보강 패널의 좌굴 발생과 좌굴 모드의 변환시 음향방출 신호가 발생하였으며, 파손 발생 후 진전시 연속적인 신호가 나타났다. 복합재료 본딩 체결부의 강도시험에서는 발생하는 음향방출 신호와 파손 형태와의 관계를 분석하였다. 본 연구의 음향방출 신호 분석에 사용된 특성을 시간에 따른 누적 히트(hit)분포, 주파수 특성과 신호의 크기이다. 본 연구를 통하여 음향방출 신호의 연속적인 발생은 파손의 진전에 따라 나타나는 특성이며, 측정된 음향방출 신호의 주파수 특성을 분석함으로써 적충 복합재료에서 나타나는 파손 모드와의 관계를 유추할 수 있다. 내부 응력크기에 따라 모재균열, 충간분리 또는 디본딩, 섬유파손을 각각 100 ㎑ 근방, 220 ㎑ 근방, 500 ㎑이상으로 분류할 수 있다. This paper studied the AE(acoustic emission) characteristics of the laminated composite structures. The composite stiffened panels under the compressive loading emitted various AE signals when they buckled or changed the buckling modes. In addition, the failure initiation and propagation generated a lot of complex signals. From the continuous signal generation, we identified when the failures initiated and whether they propagated or not. The single lap joint of laminated plates under tensional load also generated AE signals when bonding region failed. The first failure occurrence and its propagation are monitored by generated AE signals. The characteristics of AE signals used in this analysis are cumulative hits, hit distribution, peak frequency of generated AE waveform and amplitude of signals. The analysis of AE signals shows that continuous increment of cumulative hits can be regarded as damage propagation and three dominant peak frequencies can correspond to typical failure modes in the laminated composites.
박재성(Park Jae-Seong),이승재(Lee Seung-Jae),오상훈(Oh Sang-Hoon),강창훈(Kang Chang-Hoon) 한국구조물진단유지관리학회 2007 한국구조물진단학회 학술발표회논문집 Vol.11 No.1
Steel beam-to-column connection applying high strength bolt improved in deformation capacity was analyzed with non-linear FEA. We proposed high ductility-high strength bolt to improve deformation capacity of high strength bolt, which are the mechanical fasteners used for end-plate connections. As a result, rotation capacity of connection applying high ductility-high strength bolt is twice as much as existing high strength bolt connection. Test results was closely compared with FEA results. FEA results were shown that global connection behavior was acceptably predicted by the proposed non-linear FEA model.
박재성 ( Park Jae-seong ),이승재 ( Lee Seung-jae ),오상훈 ( Oh Sang-hoon ),강창훈 ( Kang Chang-hoon ) 한국구조물진단유지관리공학회 2007 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.11 No.1
Steel beam-to-column connection applying high strength bolt improved in deformation capacity was analyzed with non-linear FEA. We proposed high ductility-high strength bolt to improve deformation capacity of high strength bolt, which are the mechanical fasteners used for end-plate connections. As a result, rotation capacity of connection applying high ductility-high strength bolt is twice as much as existing high strength bolt connection. Test results was closely compared with FEA results. FEA results were shown that global connection behavior was acceptably predicted by the proposed non-linear FEA model.