http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
남상용 대구보건대학 1992 대구보건대학 論文集 Vol.13 No.-
Real bondig beteen metal and procelain is influenced by various bonding Mecanisms which also influence each other, and is caused by aseries of complicated thermochemical reaction. For this reason, clear determination of the drgree and distribution. 1. Fators influencing the Bonding strength Chemical bonding 52% (including primary bond) Mechanical bonding 22% Compression bonding 26% 2. Effects of the Base Metal Elements Added to Allots. The elements Sn. In, and Fe were added originally in accordance with the concept that they might strengthen the Alloy though a dispersion effect. 3. We heated the Degudent G.U Dental porcelain and analysis the surface elemental chang by Energy Dyspersive X-ray analysis and obtained the result that mainly the In element was concentrated to the alloy surface.
치과기공실(齒科技工室)의 작업공정별(作業工程別) 소음(騷音)에 관한 연구(硏究)
남상용,Nam, Sang-Yong 대한치과기공학회 1993 대한치과기공학회지 Vol.15 No.1
Degree of noise by personal dental laboratory working process and degree of noise by complex dental laboratory working process were measured separtely. The time of exposure to noise greater than 70dB was analyzed. Then, the whole degree of noise in dental laboratory was estimated on the basis of afore-mentioned information. Questionaire were employed to investigate the mental, emotional and physiological effects of noise in dental technicians, The purpose of this study was to provide basic information on keeping dental techneicans who are exposed to noise pollution in good working condition and good health. Results obtained are as follows ; 1. Polishing process in each working part showed high degree of noise greater than 70dB in terms of degree of noise by personal working. 2. Degree of noise by complex working process in each working part was greater than that of personal working process. 3. Time of exposure to noise complex working process the part of porcelain 150min, partial denture 120 min, crown and bridge 100 min, full denture 80 min. 4. Degree of noise by time in dental laboratory was 80dB in general for polishing process and below 75dB for waxing process. 5. Effects of noise on mental and emotional state of dental technicians showed that they felt irritated every day(14%), irritated once in a while(29%) and easily ger mad(19%). 6. Effects of noise on heart and stomach were hyper-gastric acid(38%), gastric ulcer(11%), gastritis(5%), deuodenal ulcer(3%) and weak heart function(32%). 7. Effects of noise in the hearing ability were weak(39%), moderate(33%) and normal(14%) Data presented in this study demonstrated that noise in the dental laboratory exerts profound effect on dental technicians mentally, physiologically and emotionally, in light of the above results, therefore, it appears advisable to devots substantial on the management of working condition and put further(continuing) efforts in the investigation for reducing noise problem.
남상용,곽동주,차성수 대한치과기공학회 2008 대한치과기공학회지 Vol.30 No.2
The purpose of this study was to observe the thermal expansion of the inlay waxes at temperature. Inlay pattern wax shows not only a high coefficient of expansion but also a tendency to warp or distort when allowed to stand unrestrained. The thermal expansion of inlay waxes was tested according to the treatment conditions for 10 minutes at 40'C. The thermal expansion of inlay waxes at various temperatures was measured with an electro dial gauge. The results were as fellows: 1. It is shown that the rate of thermal expansion of wax A is 0.2%, wax B is 0.29%, wax C is 0.38%, and wax D is 0.22% at 40'C. 2. It is shown that the coefficient of thermal expansion of wax A is 106*10-6/'C , wax B is , wax C is 152*10-6/'C , and wax D is s116*10-6/'C at 40'C. 3. The thermal expansion of the inlay waxes at 40'C was shown to increase in the order of wax C, B, D, A.
수전해 시스템에 적용하기 위한 상용 음이온교환막의 특성평가
남상용,박준호,임광섭 한국막학회 2022 멤브레인 Vol.32 No.6
본 연구에서는 음이온 교환막 수전해 시스템에 적용가능성을 확인하고자 상용 음이온 교환막인 FAA-3-50, Neosepta-ASE, Sustainion grade T, Fujifilm type 10의 관련 물성을 평가하였다. 음이온교환막을 이용하는 특성상 음이온교환기의 확인을 위하여 SEM/EDX를 이용하여 상용막의 모폴로지와 표면의 원소를 분석하여 상용막이 포함하고 있는 작용기의분포를 확인하였다. 또한, UTM과 TGA를 이용하여 기계적 강도 및 열분해온도를 측정하여 수전해의 구동조건을 만족하는지확인하였다. 음이온 교환막으로서의 성능을 파악하기 위하여 중요한 특성인 이온교환용량과 이온전도도를 측정하였으며, 알칼리 환경에서 구동되기 때문에 각각의 상용막의 내알칼리성을 확인하기 위한 내구성 테스트를 진행하여 비교하였다. 최종적으로 막-전극 접합체를 제조하여 수전해 single cell test를 진행하여 60°C, 70°C, 80°C의 온도 조건에서 cell 성능을 확인하였고 장기 cell test로 다른 온도에서 20 cycle 측정하여 수전해 성능을 비교하여 상용막의 음이온 교환막 수전해에 적용가능성을 비교하여 확인하였다.
염료의 탈염/정제/농축처리용 분리막의 제조 및 특성평가
남상용,장재영,정연석,이영무 한국막학회 2006 멤브레인 Vol.16 No.3
본 연구에서는 정밀여과 및 나노여과 분리막 시스템을 활용하여 염료 제조 시 필요한 탈염/정제/농축처리 기술을 개발하고 그에 따른 염료의 품질과 품질의 안정성을 향상시키며, 기존공정의 단수를 축소하여 생산성 향상, 인력저감 및 원재료의 비용을 감소하고자 하였다. 염료의 탈염/정제/농축처리시 염료의 다양한 농도에 적합한 분리막의 제조 및 가압식 막 element를 제작하고, 가압식 분리막 시스템에 맞는 막 모듈의 설계와 pilot-scale 시스템을 통해 염료의 처리수질 분석 및 운전인자를 도출하였다. Microfiltration and Nanofiltration membrane were prepared and properties of the membrane system were studied for the application of desaltingfrefiningiconcentrating process of dye production. The membrane system improved the quality of dye produce and productivity was enhanced due to reduction of processing steps and material cost. Membrane and pressure type membrane element in various dye concentration for using desaltingirefiningiconcentrating of dye processing were investigated.