국간 신호장치

김진태,이경준,Kim, Jin-Tae,Lee, Gyeong-Jun 한국전자통신연구원 1986 전자통신 Vol.8 No.2

본고에서는 전전자식 교환기 TDX-1의 국간 신호장치 R2MFC 송수신기의 구성에 관한 내용을 주로 기술하며 이의 성능 분석에 관해 고찰한다. 신호의 검출을 위해 디지틀 신호처리 방식은 여러가지가 있지만 R2MFC 국간 신호의 주파수 특성에 따라 특정 신호주파수의 예민한 응답 특성이 요구되므로 DFT(Discrete Fourier Transform)에 의한 방식으로 괴첼알고리즘을 사용하였으며 이의 실현은 실시간 처리를 위해서 전용의 디지틀 신호처리용 프로세서(UPD7720)를 이용하고 있다. 끝으로 TDX-1의 가입자 신호장치에 대해 개략적으로 기술하였다 .

영구치(永久齒) 치배형함(齒胚形咸)에 관(關)한 연구(硏究)

김진태,Kim, Jin-Tae 대한소아치과학회 1978 大韓小兒齒科學會誌 Vol.5 No.1

Of 633 children, 334 in male and 299 in female, whose ages ranged from 3 to 13 years old, the amounts of development of teeth germ were observed according to ages with oblique lateral cephalogram to study the developing state of teeth germ of mandibular premolars. The results were as followings; 1. The time of actively develop:ng tooth germ was observed about 10 years old both in male and in female. 2. The increasing rate of development of tooth germ a year was higher in female than in male at mandibular 1st premolar and in male than in female at mandibular 2nd premolar. 3. Age of complete tooth germ development was earlier in female than in male at mandibular 1st and 2nd premolars.

유치(乳齒) 치근(齒根) 흡수(吸收)에 관(關)한 연구(硏究)

김진태,Kim, Jin-Tae 대한소아치과학회 1977 大韓小兒齒科學會誌 Vol.4 No.1

178 naturally exfoliated maxillary deciduous central incisors, 149 deciduous lateral incisors of children at exfoliation stage were studied on the degree and the tendency of the root resorption, and the age of exfoliation of the deciduous central and lateral incisors. The results were as follows; 1. The root of maxillary deciduous central and lateral incisors tended to be resorbed disto-lingually. 2. The age of exfoliation of maxillary deciduous central incisor was 7.27 year in male, 7.01 year in female, and the age of exfoliation of maxillary deciduous lateral incisor was 8.22 year in male, 7.77 year in female. 3. The exfoliation age of maxillary deciduous central and lateral incisors was earlier in female than in male.

인체 삽입용 LC 공진형 혈압 센서 디자인 및 제작

김진태,김성일,정연호,Kim, Jin-Tae,Kim, Sung Il,Joung, Yeun-Ho 한국전기전자재료학회 2013 전기전자재료학회논문지 Vol.26 No.3

In this paper, we present a MEMS (micro-electro-mechanical system) implantable blood pressure sensor which has designed and fabricated with consideration of size, design flexibility, and wireless detection. Mechanical and electrical characterizations of the sensor were obtained by mathematical analysis and computer aided simulation. The sensor is composed of two coils and a air gap capacitor formed by separation of the coils. Therefore, the sensor produces its resonant frequency which is changed by external pressure variation. This frequency movement is detected by inductive coupling between the sensor and an external antenna coil. Theoretically analyzed resonant frequency of the sensor under 760 mmHg was calculated to 269.556 MHz. Fused silica was selected as sensor material with consideration of chemical and electrical reaction of human body to the material. $2mm{\times}5mm{\times}0.5mm$ pressure sensors fitted to radial artery were fabricated on the substrates by consecutive microfabrication processes: sputtering, etching, photolithography, direct bonding and laser welding. Resonant frequencies of the fabricated sensors were in the range of 269~284 MHz under 760 mmHg pressure.

그래핀 기반 광소자

김진태,최춘기,Kim, Jin-Tae,Choe, Chun-Gi 한국광학회 2012 광학과 기술 Vol.16 No.2

TM/TC를 탑재한 분산제어 시스템의 실시간 제어기 설계와 구현

김진태,박인갑,Kim, Jin-Tae,Park, In-Kap 한국전기전자학회 1999 전기전자학회논문지 Vol.3 No.1

DCS는 분산된 컴퓨터 네크워크를 이용한 통합된 EIC의 다양한 응용기술을 적용할 수 있는 원격 감시 제어가 요구되고 있다. 현재까지는 DCS는 원격 사이트의 플랜트에 대해 실시간성 보장은 기대에 미치지 못한다. 본 논문에서는 효율적인 TM/TC 시스템을 위한 각 제어기를 기존의 PRS 하드웨어와 GWS, RPS, SRS로 광역화에 맞도록 설계하였으며, 또한 각 구현된 제어기의 실시간을 만족하는 통신처리시간, 시스템 부하율을 분석하여 타당성을 검토하였다. DCS require a remote supervisory control that applies a various applications with a period of integrated EIC(electric instrument control) using distributed computer network. Until now, DCS has leaved something to be desired in guaranteeing real-time required in remote site plant. In this paper, each controller is designed by implementing the controller suiting with an wide area to enhance the hardware of existing PRS controller and GWS, RPS and SRS, for the efficiency of TM/TC system, Therefore, real-time emphasizes on the communication processing time, rate of system load analyzed and validity was evaluated for a each implemented controllers.

이중벽 탄소 나노튜브 공진기의 주파수 변동 특성 분석

김진태,이준하,Kim, Jin-Tae,Lee, Jun-Ha 한국정보통신학회 2011 한국정보통신학회논문지 Vol.15 No.1

짧은 바깥쪽 탄소 나노튜브를 가진 이중벽 탄소 나노튜브 공진기의 경우, 자유로운 끝은 긴 안쪽 벽의 진동에 중요한 역할을 한다. 짧은 안쪽 탄소 나노튜브를 가진 이중벽 카본 나노튜브 공진기의 경우, 안쪽은 부드러운 코어로 작동하여 기본 주파수가 이들의 길이에 의해 영향을 받는다. 본 논문에서는 서로 다른 길이를 가지고 나노튜브로 구성된 이중벽 탄소 나노튜브 공진기의 주파수 변화를 분석한다. 분석 결과, 안쪽 혹은 바깥쪽 탄소 나노튜브 길이를 제어하는 다양한 주파수 소자를 구현하는데 널리 응용될 수 있을 것으로 판단된다. For a double-walled carbon nanotube resonator with a short outer nanotube, the free edge of the short outer wall plays an important role in the vibration of the long inner nanotube. For a double-walled carbon nanotube resonator with a short inner nanotube, the short inner nanotube can be considered as a flexible core, thus, the fundamental frequency is influenced by its length. In this paper, we analysis frequency variation in ultrahigh frequency nanomechanical resonators based on double-walled carbon nanotubes with different wall length. This results will widely apply to the realization of frequency devices controlling the length of the inner or outer nanotube.

3차원 다공성 콜라겐지지체의 제조 및 특성 분석

김진태,임수민,김병수,이득용,최재하,Kim, Jin-Tae,Lim, Sumin,Kim, Byoung Soo,Lee, Deuk Yong,Choi, Jae Ha 대한의용생체공학회 2014 의공학회지 Vol.35 No.6

Collagen scaffolds were synthesized by cross linking into a solution mixture of 1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochlorid(EDC) in ethanol, followed by pressing, cleaning and lyophilization process after the type I atelo-collagen solutions in D.I water(pH3). The experimental conditions are collagen concentration of 1.0 wt%, 3.0 wt%, 5.0 wt% and differential concentration of cross-linker. Then, parametric studies were performed by varying the parameters to investigate the morphology, the porosity, the swelling ratio and the thickness and genotoxicity of the scaffolds. The scaffolds thickness pattern was regular to concentration of the degree of cross-linker and collagen. It was observed that the swelling ratio, the degree of crosslink, and the pore size(thickness of scaffold) can be controlled by adjusting the collagen, crosslinker. Among the parameters investigated, the smallest thickness can be achieved by collagen, crosslinker concentrate condition. The collagen scaffold is induced no genotoxicity. The lowest swelling ratio, as an indication of the highest degree of crosslink, can be obtained by adding crosslink agent.

유관기관칼럼 - 중소기업의 원초적 죄

김진태,Kim, Jin-Tae 기술표준원 2009 기술표준 Vol.92 No.-

Divinyl Sulfone으로 가교된 히알루론산 마이크로비드의 특성평가

김진태,이득용,장주웅,김태형,장용운,Kim, Jin-Tae,Lee, Deuk Yong,Jang, Ju-Woong,Kim, Tae-Hyung,Jang, Yong-Wun 대한의용생체공학회 2013 의공학회지 Vol.34 No.3

Hyaluronic acid(HA) microbeads were synthesized by dropping the sodium hyaluronate(Streptococcus) solutions in NaOH into a solution mixture of divinyl sulfone(DVS) in 2-methyl-1-propanol, followed by stirring, cleaning and drying process at room temperature. The initial experimental conditions are crosslinking time(CLTi) of 5 h, crosslinking temperature(CLTe) of room temperature, injection air pressure(IAPr) of 5 psi, and DVS concentration( DVSc) of 0.2 vol%, respectively. Then, parametric studies were performed by varying the parameters to investigate the morphology, the porosity, the swelling ratio and the size of the beads. The microbead size pattern was not regular to function of the degree of crosslink. It was observed that the swelling ratio, the degree of crosslink, and the pore size can be controlled by adjusting the CLTi, CLTe and DVSc. Among the parameters investigated, the smallest bead size can be achieved by varying the CLTi parameter. The lowest swelling ratio, as an indication of the highest degree of crosslink, can be obtained by varying CLTe.