http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수직평판(垂直平板)에 부착(附着)된 수평(水平)핀에서의 자연대류(自然對流)
김선정,이정철,서리수,권순석,Kim, S.J.,Lee, J.C.,Seo, L.S.,Kwon, S.S. 대한설비공학회 1988 설비저널 Vol.17 No.4
A study has been conducted experimentally on natural convection heat transfer characteristics of a vertical flat plate with horizontal rectangular fins in air. The effects of fin heights and Rayleigh numbers are mainly investigated. The experimental results are as follows; 1. The mean fin, plate and total Nusselt numbers decrease as dimensionless fin heights H/S increase at $0.50{\leq}H/S{\leq}2.00$. 2. The mean fin surface Nusselt number in case of H/S = 0.50 and $Ra_c=4.33{\times}10^3$ shows its maximum at $X_1$, surface where there is no interference with other fins. 3. Owing to the interference of fins the mean plate Nusselt numbers at H/S=0.50 and 2.00 for $Ra_S=6.57{\times}10^3$ are 35% and 80% respectively less than the mean fin Nusselt numbers. 4. The mean fin, plate and total Nusselt numbers of horizontal rectangular fins show higher values at short fins, but lower values at long fins than those of upward vertical fins.
핀 간격(間隔)이 루우버핀 열교환기(熱交換器)의 공기측(空氣側) 열전달(熱傳達)에 미치는 영향(影響)
김선정,정태현,권순석,Kim, S.J.,Chung, T.H.,Kwon, S.S. 대한설비공학회 1990 설비공학 논문집 Vol.2 No.4
A study has been conducted experimentally on heat transfer characteristics of louvered fin heat exchangers with various fin spacings in air. The experimental results are as follows; 1. Mean heat transfer coefficient is increased with increasing air velocity and the optimum fin spacing shows at S=5mm. 2. Pressure drop is increased with increasing air velocity and its maximum value shows at S=3.5mm and its minimum value shows at S=6mm. 3. $\bar{h}/{\Delta}P$ is decreased with increasing air velocity and its maximum value shows at S=5mm and its minimum value shows at S=3.5mm.
루우버 위치(位置)가 루우버핀 열교환기(熱交換器)의 공기측열전달(空氣側熱傳達)에 미치는 영향(影響)
김선정,정태현,권순석,Kim, S.J.,Chung, T.H.,Kwon, S.S. 대한설비공학회 1990 설비공학 논문집 Vol.2 No.2
A Study has been conducted experimentally on heat transfer characteristics of louvered fin heat exchangers with various louvered positions in air. The experimental results are as follows; 1. Mean heat transfer coefficient is increased with increasing air velocity and decreasing temperature difference. The maximum value of heat transfer coefficient shows at 10㎜ backward louvered fins. 2. Pressure drop is increased with increasing air velocity and apparently depended on the louvered positions at V>10m/sec. 3. $\bar{h}/{\Delta}P$ is decreased with increasing air velocity and its maximum value shows at 10mm forward louvered fins and its minimum value shows at plate fins.
Louvered fin 열교환기(熱交換器)의 공기측(空氣側) 열전달(熱傳達)
김선정,권순석,Kim, C.S.,Kwon, S.S. 대한설비공학회 1989 설비공학 논문집 Vol.1 No.1
A study has been conducted experimentally on heat transfer characteristics of the heat exchangers with louvered fins in air. The experimental results are as follows; 1. Mean heat transfer coefficient is decreased with increasing temperature difference and model III is the best at constant temperature difference. 2. Pressure drop is increased with increasing air velocity, but it is decreased as the heat transfer area increases. 3. $\bar{h}/^{\Delta}p$ is increased and then decreased as air velocity increases.
김창식(Kim, Chang-S.),임학수(Lim, H.S.),김진아(Kim, Jin-Ah),김선정(Kim, Seon-Jeong),박광순(Park, K.S.),정경태(Jung, K.T.) 한국해안해양공학회 2010 한국해안해양공학회 논문집 Vol.22 No.6
경기만은 한강과 임진강 수계의 하구역을 중심으로 황해의 중부해역을 잇는 매우 중요한 해역이다. 특히 경기만 해역의 연안개발로 인한 하구습지와 연안습지의 훼손이 가속화되고 있다. 이러한 갯벌과 해저 퇴적체의 변화에 대한 이해와 원인 규명을 위해서는 조석 잔차류의 역할이 중요함을 제시하였다(Kim et al., 2009). 하지만 경기만에서의 조석 잔차류에 대한 정량적 연구는 잘 이루어져 있지 못하며, 연간 변동성에 대한 연구도 흔하지 않다. 본 연구에서는 경기만 주수로인 석모수로와 장봉수로에서 1년간 연속 관측한 수층별 조류를 이용하여, 조석 잔차류의 특성과 조류분조의 특성을 정밀하게 분석하였다. Kim et al.(2009)이 제안한 이동평균(Moving average) 기법을 이용하여 연간 월별 그리고 수층별 자료로 확대하여 분석하였다. 또한 조류조화분해를 실시하여 이동평균 기법의 잔차류 특성과 비교하였으며 계절별 수층별 조류분조의 특성을 제시하였다. 비조석성분인 잔차류 산정에는 이동평균 기법과 조류조화분해법이 동일한 결과를 보였으나 단주기 변동성 분석에는 이동평균기법이 장점을 가진 것으로 보인다. 석모수로의 잔차류는 연간 낙조류 방향이며, 표층에서 20-40 cm/s, 저층에서 10 cm/s 미만으로 분석되었다. 장봉수로에서는 연간 창조류 방향의 잔차류는 표층에서 15-30 cm/s, 저층에서 20 cm/s 안팎으로써 여름철에는 강한 경압형 구조를 보인다. 본 연구에서는 해저면에 설치된 음파식 유속계 자료의 처리, 조석잔차류의 산정과 경기만 수로에서의 연간 잔차류 수직 구조와 변동성에 대한 결과를 제시함으로써, 경기 일대의 물질이동과 퇴적체 변동성 연구에 기본적 자료로 활용될 것으로 판단된다. The Kyunggi Bay in mid-west of Korea is a relatively large estuarine system that connects the Han River system with Yellow Sea. Due to macro-tidal range of more than 8 m, the urban estuary shows deep tidal channels and wide tidal flats. Since last 30 years, the coastal development is undergoing, yielding noticeable change in environment. Particularly the tidal flat dynamics are generally accepted as being related with tidal residual flows in this area (Kim et al., 2009). We have estimated the annual variation and vertical structure of residual currents with one-year long observed flows in two major tidal channels of Kyunggi Bay. The moving average method and tidal current harmonic analysis yield nearly the same results on residual flow. The residual flow in Jangbong channel ranges from 20 cm/s in summer to 30 cm/s in winter. It is noticeable that the residual flow in Jangbong channel is flood dominant throughout the year, while the flow in Seokmo channel is ebb-dominant residual flow with current speed range of 20-40 cm/s. Due to the baroclinic response of relatively shallow estuary, significant reduction of energy in bottom layers have been observed, indicating the importance of residual circulation to the tidal flat behavior.
조성관,김선정,정병옥,김재진,최규석,이영무 ( S . K . Cho,S . J . Kim,B . O . Jung,J . J . Kim,K . S . Choi,Y . M . Lee ) 한국공업화학회 1994 공업화학 Vol.5 No.5
게껍질로부터 Hackman법으로 키틴을 추출하였고 키토산은 이것을 일정 온도(100℃)에서 NaOH 용액의 농도와 반응 시간을 변화시켜 각각의 탈아세틸화 정도에 따라 제조하였다. 제조한 시료들은 A=19%, B=52%, C=70% 그리고 D=93%의 탈아세틸화된 것을 사용해 여러 가지 시험을 하였다. 분자량은 탈아세틸화도가 증가함에 따라 감소되는 현상을 나타냈고, 폐수처리 효과에 있어서 SS 제거율은 탈아세틸화도가 증가함에 따라 증가하였고 pH 9에서 우수한 성능을 나타냈으며, COD 제거율은 중성 영역에서 가장 좋게 나타났다. Chitin was extracted from crab shell by Hackman method and chitosan was prepared to chitin, that was deacetylated under various concentration of NaOH solution and reaction time at constant temperature, 100℃. Samples were A=19%, B=52%, C=70% and D=93% deacetylation`s chitosan and they were tested. When deacetylation was increased, Mw ̄ was decreased and removal rate of suspended solid and removal rate of chemical oxygen demand were increased. Suspended solid and removal rate of chemical oxygen demand showed the better at pH 9 and pH 7 than any other pH range.