http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강형석,이섭,권오춘,안욱수,배지훈,Kang, Hyong-Seok,Lee, Sub,Kwon, Oh-Choon,Ahn, Wook-Su,Bae, Chi-Hoon 대한흉부심장혈관외과학회 2000 Journal of Chest Surgery (J Chest Surg) Vol.33 No.8
Descending necrotizing mediastinitis(DNM) is one of the most lethal form of mediastinitis originating from an oropharyngeal infection. It requires an early and aggressive sugical treatment, but the operative approach and optimal form of mediastinal drainage remains controversial. We report a case of DNM in a 45-year-old male who underwent right cervicomediastinotomy to drain the deep neck space, upper mediastinum and anterior mediastinal drainage was accomplished through a subxiphoid approach. After this procedure, he steadily improved and was dischrged on hospital day 36. We report this case with a brief review of the literature.
유용성의 측면에서 기하학적, 열적 비대칭 사다리꼴 휜의 최적화
강형석,Kang, Hyung-Suk 대한기계학회 2003 大韓機械學會論文集B Vol.27 No.5
Optimum fin effectiveness of geometrically and thermally asymmetric trapezoidal fins is represented as a function of the ratio of the fin bottom to top Biot numbers, the ratio of the fin tip to top Biot numbers and fin shape factor. Optimum fin effectiveness is taken as 98% of the maximum fin effectiveness by comparing the increasing rate of fin effectiveness with that of dimensionless fin length. For this analysis, two dimensional separation of variables method is used. Also, the value of the slope of upper surface of the fin and fin efficiency corresponding to optimum effectiveness are presented.
충돌제트를 갖는 회전원판 위 3차원 경계층의 난류특성 (I) - 평균유동장 -
강형석,유정열,최해천,Kang, Hyung Suk,Yoo, Jung Yul,Choi, Haecheon 대한기계학회 1998 大韓機械學會論文集B Vol.22 No.9
The objective of the present study is to investigate experimentally the mean flow characteristics of the three-dimensional turbulent boundary layer over a rotating disk with an impinging jet at the center of the disk, which may be regarded as one of the simplest models for the flow in turbomachinery. A relatively strong radial outflow (crossflow) generated from the impinging jet is added to the radial outflow (crossflow) induced by the centrifugal force in order to create the three-dimensional boundary layer. A new calibration technique has been introduced to determine the velocity direction and magnitude using an I-wire probe, where the uncertainties are ${\pm}1.5^{\circ}$ and ${\pm}0.35\;m/s$, respectively, in the laminar boundary layer region, compared with the known exact solutions. The flow in the tangential direction is of similar type to that associated with a favorable pressure gradient, considering that no wake region appears in wall coordinate velocity profiles and the Clauser shape factor is between 4.0 and 5.3. The flow angle is significantly changed by the crossflow generated by the impinging jet.
Exynos4210 프로세서 상에서 실시간 리눅스 커널 패치의 성능 평가
강형석,이준우,최진영,김강희,Kang, Hyeongseok,Lee, Joonwoo,Choi, Jinyoung,Kim, Kanghee 한국정보처리학회 2013 정보처리학회논문지. 컴퓨터 및 통신시스템 Vol.2 No.7
최근에 지능화된 자동차, 로봇, 공장 등에 대한 관심이 높아지면서 지능화된 모션 제어 응용을 손쉽게 작성할 수 있는 소프트웨어 플랫폼에 대한 필요성이 날로 커지고 있다. 이를 위해서 그 기능과 각종 하드웨어 지원이 풍부한 범용 운영체제를 사용하는 것이 바람직하지만, 일반적으로 개별 응용의 실시간 응답성이 항상 보장되지는 않는다. 본 논문은 범용 운영체제로서 리눅스가 산업용 실시간 시스템에 적합한지 평가하기 위해 ARM 기반 프로세서 Exynos4210 상에서 Xenomai 실시간 리눅스 패치를 적용하고 모션 제어 응용의 실시간 성능을 평가하였다. 평가결과, 백그라운드 작업 부하의 간섭에도 불구하고 모션 제어 응용에게 1ms 미만의 제어 주기를 안정적으로 제공할 수 있음을 확인하였다. Recently, there is a growing need for an open software platform where developers easily write intelligent motion control applications for smart cars, smart robots, smart factories, and so on. To this end, a general-purpose operating system with rich functionalities and various hardware supports can be a candidate for such a platform, but it is known to have limitations in guaranteeing the responsiveness of individual applications. In this paper, to assess the suitability of Linux to be such a platform, we evaluate the real-time performance of Xenomai-patched Linux on an ARM-based processor Exynos4210 with motion control applications. Experimental results show that it is possible to stably provide motion cycle times below 1ms to such applications even with background workloads.
Effect of DVI Nozzle Location on the Thermal Mixing in the RVDC
강형석(Hyung Seok Kang),조봉현(Bong Hyun Cho),김환열(Hwan Yeol Kim),윤주현(Juhyeon Yoon),배윤영(Yoon Yeong Bae) 한국전산유체공학회 1998 한국전산유체공학회지 Vol.3 No.1
한국형 차세대원자로에서는 비상노심 안전주입수가 저온관을 통하지 않고 원자 로용기에 직접 주입된다. 원자로용기의 가압열충격과 열수력적 관점에서 최적의 노즐위치를 결정하기 위해서 전산유체역학을 활용하였다. 상용 전산유체코드인 CFX를 이용하여 원자로 하향유로를 모사하는 해석대상 격자를 다중블록으로 형성한 다음 유동장을 비압축성 Navier-Stokes 운동량 방정식, 에너지 방정식과 표준 k-ε 난류모형 등으로 모형화하여 3차원 비정상상태 계산을 수행하였다. CFX에서는 경계 밀착좌표계 - 비엿물림격자와 SIMPLE 알고리즘을 사용한다. 본 연구결과 원자로용기의 가압열충격 관점에서 가장 보수적인 사고인 증기관 과단사고시에도 열적혼합이 잘 일어나 가압열충격이 발생할 가능성이 없는 것으로 판단되며 안전주입수 노즐이 저온관 바로 위에 위치할 때 원자로 하향유로 내의 온도 분포가 가장 균일하여 열적 혼합 관점에서는 최적의 위치로 판단된다.
객담 전처리 방법에 따른 객담 항산균 도말 및 배양 양성률 비교연구
강형석 ( Hyung Seok Kang ),성낙문 ( Nack Moon Sung ),이선숙 ( Sun Sook Lee ),김도형 ( Do Hyung Kim ),전두수 ( Doo Soo Jeon ),황수희 ( Soo Hee Hwang ),민진홍 ( Jin Hong Min ),김진희 ( Jin Hee Kim ),원영섭 ( Young Sub Won ),박승규 ( 대한결핵 및 호흡기학회 2008 Tuberculosis and Respiratory Diseases Vol.65 No.5
연구배경: NaOH (sodium hydroxide) 기법을 이용한 전처리 객담과 NALC-NaOH (N-acetyl-L-cysteine-sodium hydroxide) 기법을 이용한 객담의 항산균 도말 및 결핵균 배양 양성률 그리고 배지 오염률을 비교하여 실험실 검사과정 중의 일부분을 개선함으로써 검사 결과의 개선이 가능한 지 확인하고자 하였다. 방법: 2007년 6월부터 2008년 6월까지 국립마산병원에서 객담 검사가 시행된 환자를 대상으로 환자에게서 객담배출 요령을 충분히 교육한 후 두개의 객담 검체를 채취하여 통상적인 NaOH 기법과 NALC-NaOH 기법을 각각 적용한 후 도말 및 배양 결과 그리고 배지 오염률을 비교하였다(n=436). 결과: 항산균 도말 검사에서는 NaOH 기법에 비하여 NALC-NaOH 기법이 다소 높은 양성률(33.0% vs. 39.0%)을 보였으나 통계적인 유의성은 없었다(p=0.078). 결핵균 배양 검사에서는 배지 오염률(culture contamination)은 각각 3.2%와 3.0%로 유의한 차이는 보이지 않았다. 배양 양성률은 NALC-NaOH 기법이 통계적으로 유의하게 높은 배양 양성률(39.7% vs. 28.0%, p=0.0003)을 보였으며, 배양 결과를 도말 검사 결과와 연관 지어 분석하였을 때 도말 검사상 음성인 경우 NaOH 기법과 NALC-NaOH 기법은 각각 7.2%와 15.8% (p=0.0017), scanty를 보인 객담의 경우 각각 42.9%와 60.8% (p=0.036)의 배양 양성률을 보여 통계적으로 의미 있는 차이를 보였다. 결론: 도말 검사에서 음성이나 scanty를 보여 상대적으로 결핵균의 수가 적은 객담의 경우 NALC-NaOH를 이용함으로써 배양 양성률을 개선 시킬 수 있었으며 이는 임상적으로 폐결핵의 진단과 치료 경과 관찰에 직접적인 도움을 줄 수 있음을 보여주었다. Background: Sputum decontamination with NALC-NaOH (N-acetyl-L-cysteine-sodium hydroxide) is known to better detect Mycobacterium tuberculosis (M. tb) by culture than that with using NaOH, which is widely used in Korean hospitals. In this report, sputum samples collected from pulmonary tuberculosis (TB) patients were treated with either NaOH or NALC-NaOH, and we compared the results of smear and culture positivity to determine whether the NALC-NaOH treatment method improves culture positivity in the sputum samples, and especially for those sputum samples that are smear negative and scanty. Methods: For each decontamination method, 436 sputum samples from pulmonary TB patients in the National Masan Tuberculosis Hospital were collected for this study. Sputum from a patient was collected two times for the first and second day of sampling time, and these samples were employed for the decontamination process by performing the 4% NaOH and NALC-2% NaOH treatment methods, respectively, for detecting M. tb by an AFB (Acid Fast Bacilli) smear and also by culture in solid Ogawa medium. Results: The NaOH and NALC-NaOH treatment methods did not significantly affect the AFB smear positivity of the sputum samples (33.0% vs 39.0%, respectively, p=0.078). However, the culture positive percents of M. tb in the Ogawa medium treated with NALC-NaOH and NaOH were 39.7% and 28.0%, respectively, which was a significantly different (p=0.0003). This difference in culture was more prominent in the sputum samples that were smear negative (the positive percents with NALC-NaOH and NaOH were 15.8% and 7.2%, respectively, p=0.0017) and scanty (NALC-NaOH and NaOH were 60.8% and 42.9%, respectively, p=0.036), but not for a smear that was 1+ or higher (p>0.05). Conclusion: NALC-NaOH treatment is better than NaOH treatment for the detection of M. tb by culture, but not by smear, and especially when the AFB smear is negative and scanty. (Tuberc Respir Dis 2008;65:379-384)