김치에서 분리한 Lactobacillus sp. JC-7과 Lactobacillus acidophilus 88간의 Electrofusion 최적조건 설정

조영배,최현정,백형석,전홍기 부산대학교 유전공학연구소 1997 분자생물학 연구보 Vol.13 No.-

김치 발효 숙성기간을 연장하고 신선도를 오랫동안 유지 할 수 있는 김치발효 starter의 개발을 목적으로 최적숙성기에 있는 김치로부터 bacteriocin생성능이 없는 유산균을 분리하여 동정하였으며, bacteriocin생성능이 우수한 L.acidophilus 88을 융합시키기 위해 electrofusion에 대한 최적 조건을 검토하였다. 분리균주는 Lactobacillus속으로 동정되어 Lactobacillus sp. JC-7이라 명명하였다. Electrofusion에 의해 생성된 융합주를 식별하기 위해 streptomycin(2.5㎎/ml)에 내성을 나타내는 Lactobacillus sp. JC-7변이주와 kanamycin(600㎍/ml)에 내성을 나타내는 L.acidophilus 88변이주를 분리하였다. Electrofusion을 100V/㎝, 120msec(72ohms,1670 capacitance) 에서 수행했을 때 융합효율이 가장 양호하였으며 전기장의 세기와 시간이 중가할수록 융합 효율이 현저히 감소하였다. 2가 양이온은 농도가 중가할수록 대체적으로 융합효율을 감소시키는 경향을 나타내었으나 1mM MGCl_2에서는 대조군에 비해 융합효율이 약간 증가하였다. PEG매개에 의한 융합법의 융합효율을 비교한 결과, 융합효율은 chemical fusion<electrofusion<electrofusion+20% PEG순을 나타내었다. Evaluation of Optimum Conditions for the Electrofusion between Lactobacillus sp. JC-7 Isolated from Kimchi and Lactobacillus acidophilus 88. Young-Bae Jo, Hyun-Jung Choi, Hyung-Suk Baik and Hong-Ki Jun*. Department of Microbiology, Pusan National University, Pusan 609-735,Korea-A lactic acid bacterium was isolated from kimchi. The isolated strain was identified as the genus Lactobacillus thrugh its morphological characteristics and named as Lactobacillus sp. JC-7. The optimum conditions for the electrofusion between streptomycin(2.5㎎/ml)resistant mutant of Lactobacillus acidophilus 88 and kanamycin(600㎍/ml) resistant mutant Lactobacillus sp. JC-7 were evaluated. The highest number of fusants were obtained at a capacitance value of 120msec(1670㎌), a field strength of 100V/㎝,and a pulse controller setting of 72Ω. The potimum pH of elecroporation buffer was 7.5 and the concentration of divalent cation was 1mM MG^2+. Electrofusants were efficiently obtained by addition 20% polyethylene glycol to electroporation buffer. The yield of fusion was better than that of using polyethylene glycol mediated chemical induction.

Development of a Reduction Algorithm of GEO Satellite Optical Observation Data for Optical Wide Field Patrol (OWL)

Sun-youp Park,Jin Choi1,Jung Hyun Jo,Ju Young Son,Yung-Sik Park,Hong-Suh Yim,Hong-Suh Yim,Hong-Kyu Moon,Young-Ho Bae,Jang-Hyun Park 한국우주과학회 2015 Journal of Astronomy and Space Sciences Vol.32 No.3

An algorithm to automatically extract coordinate and time information from optical observation data of geostationary orbit satellites (GEO satellites) or geosynchronous orbit satellites (GOS satellites) is developed. The optical wide-field patrol system is capable of automatic observation using a pre-arranged schedule. Therefore, if this type of automatic analysis algorithm is available, daily unmanned monitoring of GEO satellites can be possible. For data acquisition for development, the COMS1 satellite was observed with 1-s exposure time and 1-m interval. The images were grouped and processed in terms of “action”, and each action was composed of six or nine successive images. First, a reference image with the best quality in one action was selected. Next, the rest of the images in the action were geometrically transformed to fit in the horizontal coordinate system (expressed in azimuthal angle and elevation) of the reference image. Then, these images were median-combined to retain only the possible non-moving GEO candidates. By reverting the coordinate transformation of the positions of these GEO satellite candidates, the final coordinates could be calculated.

Arch교의 橫桁連結部 局部應力과 疲勞擧動에 관한 硏究

최광순,조호근,손영호,최광규 동아대학교 건설기술연구소 1997 硏究報告 Vol.21 No.2

In this paper, the relation between the local stress and the fatigue behavior at gusset plate connected with main girder and floor beam in arch bridges was obtained. The conclusion was as follows : (1) In-plane bending moment and out-of-plane bending moment are higher than other internal stress resultants. (2) When a vehicle crosses the bridges, the change of out-of-plane bending moment corresponds with the change of relative difference in displacement in the longitudinal direction between the tie-girder and stringer. (3) The change of in-plane bending moment corresponds with the change of the displacement in the transverse direction of arch-rib. (4) Fatigue crack can be initiated by in-plane bending stress that Is produced by out-of-plane bending moment at the toe of gusset plate. (5) Fatigue crack can be initiated by tension stress that is produced by in-plane bending moment at the toe of gusset plate.

인벌류우트 기어 호빙 과정에 대한 해석

최석문,이상조,윤영식 연세대학교 산업기술연구소 1991 논문집 Vol.23 No.2

The cutting amount of each tooth in gear hobbing has much influence on the vibration of the hob axis and the wear of tool. In this study, with the simulation of gear hobbing mechanism, cutting parameters such as cutting thickness, cutting are and area moment were calculated. The cutting torque was also obtained by the experiments. The cutting amount of each tooth in the hob can be compared quantitatively by the simulation on the calculated cutting zone, cutting thickness and cutting are. And the cutting torque obtained by the experiments has the same tendency with the area moment calculated by the simulations. The results of this study can be applied to the research on the tool wear, the hob having modified tooth profile and the variation of cutting torque.

잡음제거에 적합한 유전적 연산자 및 미세국부조정에 대한 연구

조영창,윤정오,최병진 경운대학교 산업기술연구소 1999 産業技術硏究論文誌 Vol.1 No.1(B)

In this paper, we introduce the genetic algorithm and propose the genetic operators, crossover and mutation, suited for gray scaled image restoration in order to find the global optima among many local optima in the solution space. And we also proposed the local fine tuning of window size and visit number for delicate searching mechanism in the vicinity of the global solution. Through the experimental results we verified the effectiveness of the proposed genetic operators on the gray scaled images over the conventional ones, as well as the improved performance of local fine tuning.

불균일 Winkler 탄성 기초위에 놓인 보의 자유진동과 안정성

최봉문,윤영식,윤충섭,류봉조 建陽大學校 1999 建陽論叢 Vol.- No.7

The paper deals with free vibration and stability analysis of a uniform Euler-Bernoulli beam resting on non-uniform Winkler elastic foundation. governing equations for the system are derived by using energy expressions. Solutions are approximately and numerically calculated by means of the finite element formulation. The solutions in the present paper are compared with other available ones without axial force. Finally, stability for cantilever and simply supported beams under a pure axial force is investigated.

자발성 뇌교출혈 환자의 예후에 관한 임상 분석

조재영,석종식,민병국,권정택,최덕영,황성남,김영백,박승원 중앙대학교 의과대학 의과학연구소 2002 中央醫大誌 Vol.27 No.1

Patients with spontaneous pontine hemorrhage very often develop setvere disturbances of consciousness,pupilary abnormalities, respiratory and motor. They have high mortality rate. Therefore, I analyzed the correlation between the Glasgow outcome scale(GOS)and clincial manifestations or computed tomographic(CT)findings in 48 patients with spontaneous pontine hemorrhage to clarify factors predicting the prognosis. I examined 48 Patients with spontaneous pontine hemorrhage; 33 males and 15 females, age 54.6±8.99(mean±S.D.;range 39 to 68)brought to our hospital between January 1995 and December 1999, retrospectively. Correlations between the clinical manifestations, CT findings and the GOS was assessed with multivariate regression analysis. The results were as follow: 1) Patients with the pontine hemorrhage were of 8.8% in those with intracerebral hemorrhage. The ratio of male and female was 33 to 15. The incidence of age is eqial to 40,50 and 60. Total mortality was 41.6%. 2) The poor prognostic factor were that; Glasgow coma scale(GCS)3∼8, irregular respiration. pupilary abnormality, quadriplegia, Brain CT typeⅠ(massive), hydrocephalus, extrapontine extension, Intraventricular hemorrhage(IVH). These clinical analysis should be useful in determining the level of care and future resuscitative efforts.

국내산 석탄회를 이용한 제올라이트 흡착제 합성 고찰

최진식,조영민 경희대학교 2006 環境硏究 論文集 Vol.15 No.-

A domestic coal fly ash was modified to zeolitic materials by two contrast methods : alkali hydrothermal method and direct synthesis. The method of direct synthesis using a high pressure hydrothermal reactor enabled more rapid to synthesize the stable structure of zealots. The reaction for 48 hours was found to be enough to form the crystalline materials. Adsorption by synthesized zeolitic materials was as good as a commercial zeolite(13X), but Cr could not be adsorbed in high efficiency.

사후분해 시체에 대한 법의학적 접근

최영식,이상용,김유훈,조갑래,이봉우,양경무,정낙은,서중석,이한영,이원태,강현욱 大韓法醫學會 2000 대한법의학회지 Vol.24 No.2

Disposal of a homicide victim by dismemberment is rare, but individual cases are on record in most major medicolegal departments. Recognition of postmortem mutilation may be of importance in the interpretation of certain murders committed by sexual perverts and other mentally deranged individuals and sometimes performed for the sole reason of easier disposal of the body. Postmortem dismemberment is usually readily recognizable as such; The edges of the injuries are dry and lack evidence of bleeding. The joints may be disarticulated without fracture, or the use of an axe or saw may be evident from examination of bones. Parallel horizontal or oblique furrows in the bone surface are caused by skipping of the saw prior to establishing depth. Such patterns on the bone may assist in identifying the particular saw involved. So we report 25 dismembered corpses that autopsied in National Institute of Scientific Investigation. This paper can help in attempting to establish not only the first criminal investigation steps but also the medicolegal approach methods in unidentified and dismembered deaths.

담양신설 IC의 교통소음도 조사연구

최형일,강영주,채희정,김연풍,조도호,설동화,정숙경 조선대학교 환경공해연구소 2007 環境公害硏究 Vol.20 No.1

After the vehicle has become a large formation with high-speed, loud noise from an express highway is increasing, and the number of large-scale apartment complexes, which are recently being constructed in the metropolitan area nearby the express highway and IC, is increasing gradually. Compared with a main road, the traffic volume and the speed of a vehicle between IC and the ramp way [turn-off] are smaller. If the ramp way is rightly connected with the downtown area, however, the traffic-noise that comes about in surrounding areas will be in conjunction with the traffic-noise from the main road of express highway and that of the ramp way. This research has selected a place that hasn't had a road or a commercial quarter nearby the main-road of IC and ramp way. Then we have studied the traffic-noise status under minimizing influence of its outer-noise, which occurs in IC. 1. The traffic volume change of a small and full-sized car with time has been kept on regularity in 2004 and 2005. As the traffic volume of a full-sized car has diminished remarkably, it has been maintaining through 6:00a.m.-10:00 a.m. As it has decreased since lO:OO a.m.. we have also observed the traffic proportion going up. 2. Monthly traffic volume of small cars was higher in May, August and October than other months. We have observed that the high traffic volume during these months is due to the following: May-The Damyang festival, August-a high-demand season, October-viewing scarlet maple leaves. Monthly traffic volume of full-sized cars was generally higher in August, but it has decreased during 2006. This was due to the many construction trucks that were working on the extension of the 88 Olympic expressway. Therefore, there was more traffic volume in 2006 compared to 2004 and 2005. 3. In this study, the noise figures have been less than 55 dB(A) in 18 spots. There were 14 spots from 55dB(A) to 58dB(A). 58-61dB(A) : 20, 61-64dB(A) : 17, 64-67dB(A) : 18. There were 8 spots we observed at the highest level from 67dB(A) to 70dB(A). Those were the nearby spots separating the main road and Damyang IC. 4. Traffic-noise at the boundary between IC and the main road of an expressway was higher than that of the same distance in other places. 5. We have observed that traffic-noise is low in places with mountains that serve the role of soundproofing walls. Thus, the fundamental sound hadn't affected it.