관상동맥 누공에 의한 급성 심근 경색 1예

서유승,최재웅,송창섭,조용범,양진수,박준섭,정인수 대한내과학회 2003 대한내과학회지 Vol.65 No.2

관상동맥 동정맥루 기형은 매우 드문 질환으로 치료가 불필요한 경우가 대부분이나 coronary steal 현상으로 인해 증상이 발생하거나 합병증이 발생한 환자에 대해선 치료를 요한다. 최근에는 시술에 적합한 누공을 가진 선택된 환자군을 대상으로 카테터를 이용한 중재적 시술이 시행되어 수술적 치료와 유사한 결과를 얻고 있다. 저자들은 젊은 남자에서 관상동맥 동정맥루 기형과 동반된 급성 심근 경색증을 진단하여 비 수술적 방법인 카테타 코일 색전술로 성공적 치료 후 증상 및 심근 재관류에 호전을 보인 증례를 경험하였기에 문헌고찰과 함께 보고하는 바이다. We report a case of coronary fistula between the left anterior descending and main pulmonary artery complicating acute non-Q wave myocardial infarction. A 27-year-old man visited emergency department because of severe chest pain lasting two hours. The electrocardiogram showed ST segment elevation in precordial leads V3~6. Cardiac enzymes were as follows;CK-MB:36.44 IU/L T-T:0.489 ng/mL, CPK:542 IU/L, and LDH:475 IU/L. The thallium-201 dipyridamole stress perfusion scan showed perfusion defect and reversed redistribution in the anteroseptal wall. The coronary angiogram revealed coronary artery fistula between the proximal left anterior descending artery and main pulmonary artery without significant stenoses of coronary arteries. The result of ergonovine test was negative. After micro-coil embolization to the coronary fistula, symptoms were improved. Follow-up thallium-201 scan showed normalized blood flow in the left anteroseptal wall.

중량물 들고 보행시 잡기유형의 차이에 대한 운동학적 분석

서국웅,윤양진,김용재,이훈식,정미라,이창민,이중숙 한국운동역학회 2000 한국운동역학회지 Vol.9 No.2

The purpose of this study was to examine the kinematic changes of the body according to various weight loads and the holding during carrying object. The experiments were conducted with utilizing image, analyses for five male and five female adults as subjects. The results were as followed. 1. Meaningful differences were shown partially in the angle changes of the subject's wrist joints, elbow joints and coxal articulations, but not in the angle changes of the subject's knee joints, according to the types of holding the objects while subjects carrying 5kg objects. So, carrying a light object of 5kg in workplaces or gyms doesn't have much influence on human joints and muscles. 2. Meaningful differences of angle changes were shown between right holding and vertical holding while subjects carrying 10kg objects. Female subjects had difficulties to hold the angles of their wrist joints and elbow joints, carrying 10kg objects, because the first loads were imposed on their wrists and female has weaker muscles than male. In right holding of 10kg objects, female subjects had backward body centers from their bodies, the angle of their coxal articulation became bigger and they had unstable behaviors. 3. Female subjects had wider angle of their wrist joints and elbow joints while carrying 15kg objects than male subjects. But male subjects had bigger angle of coxal articulation than female subjects. Because female has weaker muscles, female subjects couldn't maintain the angles of their wrist joints and elbow joints. 4. The 20kg objects influenced the angles of the wrist joints, the elbow joints and the coaxal articulations of both sex subjects in any type of holding during their carrying 20 kg objects, but didn't influence their knee joints. 5. in carrying 25kg objects, female subjects had wider angles of their wrist joints, elbow joints and knee joints in each holding type than male subjects and the significant difference were shown according to the holding type. But in the case of coxal articulation, male subjects had the bigger angles and meaningful differences. This comes from the weakness of female's muscle. N\Male subject's upper bodies were drawn back and the objects influenced their wrists more than their arms.

HSS STI-CMP적용을 위한이중 패드의 최적화

서용진,박성우,김철복,정소용,이경진,김기욱,박창준 대불대학교 2002 大佛大學校大學院 硏究論文集 Vol.- No.1

As the device geometry shrinks to the deep submicron region, chemical mechanical polishing(CMP) planarization become a more essential technique of advanced ULSI process. Also, CMP process was required for the global planarization of inter-metal dielectric(IMD), inter-level dielectric(ILD) layers and interconnections with free-defect. Especially, the complete global planarization of IMD, ILD and interconnections can be achieved only with the CMP process. However, as the IMD and ILD layer gets thinner, several problems were found in the CMP process. It does have various problems such as dishing effect, torn oxide defects and nitride residues in oxide. So, it leads to severe circuit failure, which affects yield. In this paper, we studied the characteristics of polishing pad, which can apply STI-CMP process for global planarization of multilevel interconnection structure. Also, we investigated the effects of different sets of polishing pad, such as soft and hard pad. As an experimental result, hard pad showed center-fast type, and soft pad showed edge-fast type. Totally, the defect level has shown little difference, however, the counts of scratch was defected less than 2 on JR111 pad. Through the above result, we can select optimum polishing pad, so we can expect the improvement of throughput and device yield.

순환기 질환에서 엔도텔린-1의 병태생리학적 의미와 엔도텔린 길항제의 임상적 유용성

서봉관,최동주,황진용 대한순환기학회 1998 Korean Circulation Journal Vol.28 No.5

스쿠알렌 합성 유전자를 도입한 형질전환 가시오가피

서진욱,정재훈,최용의,이학성,신차균 중앙대학교 유전공학연구소 2003 遺傳工學硏究論集 Vol.16 No.1

The enzyme, squalene synthase, represents a branch point in the isoprenoid pathway capable of diverting carbon flow specifically to the biosynthesis of phytosterol and Triterpenoid. Transgenic Eleutherococcus senticosus plants were prepared by introducing the genes for squalene synthase derived from Panax ginseng (PgSS1), hygromycin phosphotransferase (HPT) and green fluorescent protein (GFP) through Agrobacterium-mediated transformation. Establishment of transgenic plantlets were confirmed by the presence of PgSS1 and HPT bands in the genomic DNA preparation using a PCR method and a Southern blotting. In addition, expression of the introduced GFP DNA was confirmed by observing green fluorescence of GFP from the embroyos. In the in vitro analysis of the PgSS1 enzymatic activities the transgenic plants showed to have 1.5 to 3 times higher than wild type plant, indicating that the PgSS1 genes was well over-expressed in the transgenic plants. Especially the PgSS1 acivities of embroyogenic cell was 120 times higher than those of plantlet.

전어의 보존중 겨자의 처리 효과

서권일,강갑석,이용수,정용진,김용택,심기환 동아시아식생활학회 1996 동아시아식생활학회지 Vol.6 No.2

Effects of mustard seed(Brassica juncea) on the preservation of raw gizzard-shad slice were investigated, morphological change of Vibrio parahaemolyticus treated with water-extract of mustard seed was examined, the results are as following. The pH of raw gizzard-shad slice soaked in water with mustard seed slightly increased during preservation, and the pH was in inverse proportion to the added amount of mustard seed. The number of bacteria and Vibrio of raw gizzard-shad slice treated with mustard seed were lower than control, and the higher the mustard seed concentration, the lower the number of bacteria and Vibrio. The TMA-N content of raw gizzard-shad slice gradually increased during preservation, and the TMA-N was in inverse proportion to the added amount of mustard seed. Scanning electron microscopy of Vibrio parahaemolyticus treated with water extract of mustard seed showed that surface membrane was destroyed with expended ellipsoidal shape.

3차원 분석법의 적용 : DLT 방식 DLT(Dircet Linear Transformation) Method

서국웅,윤양진,김용재,이훈식 釜山大學校 附設 體育科學硏究所 1995 體育科學硏究所 論文集 Vol.11 No.-

The purpose of this study was to maximize the application of 3-d cine-photogrammetry, in which the DLT(Direct Linear Transformation) technique is used, by searching for some practical methods of application, and to develop a comprehensive package of programs of 3-d analyses. The raw digitized coordinate date were processed by a personal computer with the developed package. Two kinds of control-point-frame(pyramid, range pole), and a synchro-timer were designed and utilized in the study. Two theodolites were used of the angle measurements of the control points. The conclusions are as follows 1. Range pole system was much superior to control point pyramid system in the applicability of the control point frame. There was no significant difference between the calculated average length using the range pole system and the actual length of the rotation rod. 2. The automatic numerical aligning technique for the digitizing apparatus reduced the RMS of residuals of the control point space coodinates. But the optional distortion was not corrected by the correction model. 3. The application of the synchro-timer which was designed and used for the study was proved. But the standard deviation of the time interval between adjacent frames was affected by the quality of the image. 4. As a result of adopting unique of calculations of the control point space coordinates, the ratio of the power of the control point reconstruction to the size of the control point frame was reduced greatly

오징어 내장에서 분리한 Protease 특성의 모니터링

서지형,정용진,이기동,이명희 동아시아식생활학회 1999 동아시아식생활학회지 Vol.9 No.2

The characteristics of protease from squid viscera was investigated by response surface methodology(RSM) programmed with reaction temperature and pH. The optimal temperature and pH for the protease were 41.75℃ and pH 6.02 respectively. Also its activity was 78.65 unit at the optimal condition and R² of the model was 0.8461(P<0.1). The protease activity was decreased by Na^(+) and increased by Mg^(2+). But K^(+) did not affect the protease. The Km value against casein was determined to be 0.12 mM by Line-weaver-Burk plot.

반경험적 스케일 방법을 사용한 0.35 μm LDD-nMOSFET의 핫 캐리어 현상 억제를 위한 공정설계에 관한 연구

서용진,안태현,이경태 대불대학교 1998 論文集 Vol.4 No.1

This paper grasped trends of hot-corrier and punchthrough phenomena as a variation of some process parameters such as LDD doses (P), spacer lengths, channel doses(BF_(2)) and V_(T) adjusting channel implantation energies using Design Trend Curve(DTC). As the LDD dose increased, hot-carrier phenomena became more severe and punchthrough phenomenon was deteriorated. As increasing channel dose (BF_(2)), hot-carrier phenomenon was aggravated in contrast with punchthrough phenomenon which was improved. The model was proved by two dimensional electrical characteristics including generation of impact ionization rate and distribution of electric field with simulation. It was used to TSUPREM-IV and MEDICI for processing and device simulation, respectively.

제주도 연안 갈치 채낚기 어구의 생력화 : 1.연속식 채낚기어구의 모형 실험

서두옥,정용진,김석종,이창헌,김고환,박용석 제주대학교 해양연구소 2000 해양과환경연구소 연구논문집 Vol.24 No.-

The authors carried out a model experiment of continuoius hairtail hand line on the rooftop in order to obtain the fundamental data on elimination of labor with haritail hand line in the coast of Jeju. The results are as follow ; 1.The continuous main line was rotated smoothly by driving roller. 2.The branch lines and hooks on a main line which was rotated by rotary machine were entangled slightly. 3. The branch lines attached to rubbered model of hairtails to hooks were rotated continuously by the rotary machine.