Adjusting optical resonance thickness to increase the conversion efficiency of polymer solar cells

Yu Sheng Tsai,Jian-Shian Lin,Wei-Ping Chu,Po-Hsun Wang,Fuh-Shyang Juang,Ming-Hua Chung,Chin-Ming Chen,Mark O. Liu 한국물리학회 2010 Current Applied Physics Vol.10 No.3

The derivatives of C60, [6,6]-phenyl C61-butyric acid methyl ester (PCBM), and 3-hexylthiophene (P3HT)were dissolved in DCB solvent, then spin coated into an active layer for polymer solar cells. The experimental parameters were studied carefully to obtain the optimum power conversion efficiency (PCE). The primary process for generation of photocurrent in an organic photovoltaic device is the generation of bound electron–hole pairs (excitons) by absorption of energy (photons) from the optical electric field. Modeling was based on the assumption that the photocurrent generation process is the result of the creation and diffusion of photogenerated species (excitons), which are dissociated by charge transfer at the active layer. Improve organic optics absorb by insert organic layer (CuPc or C60) at the active layer/Al interface. This research is divided into two components. First part, we use n-type C60 as transmission layer. When an optimum thickness of C60 is 5 nm, the Jsc of polymer solar cell can be increased from 7.26 mA/㎠ to 7.7 mA/㎠. The Voc decrease is because the energy level of C60 LUMO (lowest unoccupied molecular orbital) at 4.5 eV is higher than the 3.7 eV of PCBM. Second part, we use p-type CuPc as transmission layer. When an optimum thickness of CuPc is 3 nm, the short circuit photo-current density (Jsc) and open circuit voltage (Voc) of polymer solar cell can be increased from 7.26 mA/㎠ to 8.0 mA/㎠ and 0.56–0.58 V, respectively. The reason is the same as C60. The Voc increase is because the energy level of CuPc LUMO (lowest unoccupied molecular orbital) at 3.1 eV is lower than the 3.7 eV of PCBM. The Jsc increase is because the 3 nm of CuPc leads to a constructive interference happened in the active layer and thus optical absorption increases. In this study we used 3 nm of CuPc at the active layer/Al interface to enhance the short circuit current density, and the efficiency was increased to 2.94%.

The Effectiveness of Dignity Therapy as Applied to End-of-Life Patients with Cancer in Taiwan: A Quasi-Experimental Study

Yu-Chi Li,Yin-Hsun Feng,Hui-Ying Chiang,Shu-Ching Ma,Hsiu-Hung Wang 한국간호과학회 2020 Asian Nursing Research Vol.14 No.4

Purpose: The aim of the study was to determine the effectiveness of dignity therapy for end-of-lifepatients with cancer. Methods: This study used a quasi-experimental study design with a nonrandomized controlled trial. Dignity therapy was used as an intervention in the experimental group, and general visit was used in thecontrol group. Thirty end-of-life patients with cancer were recruited, with 16 in the experimental groupand 14 in the control group. Outcome variables were the participants' dignity, demoralization, anddepression. Measurements were taken at the following time points: pre-test (before intervention), posttest1 (the 7th day), and post-test 2 (the 14th day). The effectiveness of the intervention in the twogroups was analyzed using the generalized estimating equation, with the p value set to be less than .05. Results: After dignity therapy, the end-of-life patients with cancer reflected increased dignity significantly[b ¼ 37.08, standard error (SE) ¼ 7.43, Wald c2 ¼ 24.94, p < .001], whereas demoralization(b¼ 39.55, SE ¼ 6.42,Wald c2 ¼ 37.95, p < .001) and depression (b¼ 12.01, SE ¼ 2.17,Wald c2 ¼ 30.71,p < .001) were both reduced significantly. Conclusion: Clinical nurses could be adopting dignity therapy to relieve psychological distress andimprove spiritual need in end-of-life patients with cancer. Future studies might be expanded tolooking at patients vis- a-vis end-of-life patients without cancer to improve their psychologicaldistress. These results provide reference data for the care of end-of-life patients with cancer fornursing professionals.

Korean-Chinese Person Name Translation for Cross Language Information Retrieval

( Yu Chun Wang ),( Yi Hsun Lee ),( Chu Cheng Lin ) 한국언어정보학회 2007 학술대회 논문집 Vol.2007 No.-

Named entity translation plays an important role in many applications, such as information retrieval and machine translation. In this paper, we focus on translating person names, the most common type of name entity in Korean-Chinese cross language information retrieval (KCIR). Unlike other languages, Chinese uses characters (ideographs), which makes person name translation difficult because one syllable may map to several Chinese characters. We propose an effective hybrid person name translation method to improve the performance of KCIR. First, we use Wikipedia as a translation tool based on the inter-language links between the Korean edition and the Chinese or English editions. Second, we adopt the Naver people search engine to find the query name``s Chinese or English translation. Third, we extract Korean-English transliteration pairs from Google snippets, and then search for the English-Chinese transliteration in the database of Taiwan``s Central News Agency or in Google. The performance of KCIR using our method is over five times better than that of a dictionary-based system. The mean average precision is 0.3490 and the average recall is 0.7534. The method can deal with Chinese, Japanese, Korean, as well as non-CJK person name translation from Korean to Chinese. Hence, it substantially improves the performance of KCIR.

Medical students’ self-assessed efficacy and satisfaction with training on endotracheal intubation and central venous catheterization with smart glasses in Taiwan: a non-equivalent control-group pre- and post-test study

Yu-Fan Lin,Chien-Ying Wang,Yen-Hsun Huang,Sheng-Min Lin,Ying-Ying Yang 한국보건의료인국가시험원 2022 보건의료교육평가 Vol.19 No.-

Purpose Endotracheal intubation and central venous catheterization are essential procedures in clinical practice. Simulation-based technology such as smart glasses has been used to facilitate medical students’ training on these procedures. We investigated medical students’ self-assessed efficacy and satisfaction regarding the practice and training of these procedures with smart glasses in Taiwan. Methods This observational study enrolled 145 medical students in the 5th and 6th years participating in clerkships at Taipei Veterans General Hospital between October 2020 and December 2021. Students were divided into the smart glasses or the control group and received training at a workshop. The primary outcomes included students’ pre- and post-intervention scores for self-assessed efficacy and satisfaction with the training tool, instructor’s teaching, and the workshop. Results The pre-intervention scores for self-assessed efficacy of 5th- and 6th-year medical students in endotracheal intubation and central venous catheterization procedures showed no significant difference. The post-intervention score of self-assessed efficacy in the smart glasses group was better than that of the control group. Moreover, 6th-year medical students in the smart glasses group showed higher satisfaction with the training tool, instructor’s teaching, and workshop than those in the control group. Conclusion Smart glasses served as a suitable simulation tool for endotracheal intubation and central venous catheterization procedures training in medical students. Medical students practicing with smart glasses showed improved self-assessed efficacy and higher satisfaction with training, especially for procedural steps in a space-limited field. Simulation training on procedural skills with smart glasses in 5th-year medical students may be adjusted to improve their satisfaction.

Dignity and Related Factors in Patients with Cancer: A Cross-Sectional Study

Li Yu-Chi,Feng Yin-Hsun,Ma Shu-Ching,Wang Hsiu-Hung 한국간호과학회 2023 Asian Nursing Research Vol.17 No.1

Purpose: Dignity is a basic human right that is related to psychological distress factors in patients with cancer such as depression and demoralization. Hence, the dignity issue is of great importance to healthcare professionals. The present study aimed to advise healthcare professionals regarding the related distress factors of dignity in patients with cancer by investigating its relationship with patients’ demographics, disease characteristics, and psychological distress. Methods: This was a cross-sectional study design. A convenience sample of 267 patients with cancer from a medical center was recruited into this study. Each patient completed demographics and disease characteristics questionnaires, the Patient Dignity Inventory Mandarin Version, the Demoralization Scale Mandarin Version (DS-MV), and the Patient Health Questionnaire-9 (PHQ-9). Data were analyzed with SPSS 22.0 software. Results: Dignity was significantly correlated with age, demoralization, and depression. Cancer patients aged 65 or above were more likely to have a lower sense of dignity. In the present study, the sensitivity and specificity of the Patient Dignity Inventory Mandarin Version for demoralization (DS-MVꠑ30) were 84.8% and 79.1% and for depression (PHQ-9ꠑ10) were 73.8% and 70.9% in patients with cancer with an aggregate score of 35 or above. Conclusions: Dignity is significantly correlated with personal demographic characteristics and psychoꠓlogical distress in patients with cancer. The results provide reference data for healthcare professionals to understand and enable dignity in patients with cancer and aid in the development of methods that promote their dignity

Mitigating SYN flooding Attack and ARP Spoofing in SDN Data Plane

Ting-Yu Lin,Jhen-Ping Wu,Pei-Hsuan Hung,Ching-Hsuan Shao,Yu-Ting Wang,Yun-Zhan Cai,Meng-Hsun Tsai 한국통신학회 2020 한국통신학회 APNOMS Vol.2020 No.09

As the number of network devices increases rapidly, it becomes more and more difficult to defend network attacks. Large-scaled attacks, such as SYN flooding, may lead to heavy burden to the switches as well as the controller in a software defined network (SDN). In this paper, we investigate the SYN flooding and Address Resolution Protocol (ARP) spoofing attacks in SDN, and then propose mechanisms to address these two attacks. We also present a new scheme to detect SYN flooding by using only a few forwarding rules. Moreover, we utilize the Programming Protocol-independent Packet Processors (P4) technique to mitigate the burden of the controller.

Modified automotive organic friction materials through infiltration of liquid carbon precursors

이규정,Wu Ting-Yu,Lin Hsun-Yu,Cheng Huy-Zuㅍ,Wang Chih-Feng 한국탄소학회 2019 Carbon Letters Vol.29 No.4

This research combines the liquid carbon precursor infiltration process for carbon/carbon composites with the fabrication procedure for organic, carbon-matrix friction materials in automotive. In the densification process, different liquid carbon precursors and numbers of densification cycle are adopted to investigate the influence on physical and mechanical properties, microstructure and tribological behavior. Experimental results indicate that the infiltration of liquid carbon precursors could improve the physical, mechanical properties and tribological performances of organic friction materials. The open porosity decreases with the number of densification cycle. Both bulk density and hardness increase with the number of densification cycle. The resin-based specimens show higher hardness and lower open porosity than those of the pitch-based specimens after each densification cycle. The tribological measurement of specimens with different carbon precursors shows that the pitch-based specimen shows lower and more stable friction coefficients and exhibits lower weight losses in comparison with other carbon precursors. Morphological observations show that a large area of smooth lubricative film was easily presented on the worn surfaces of the pitch-based specimens, whereas it was seldom observed on the worn surfaces of the preform specimen and resin-based specimens.

Modified automotive organic friction materials through infiltration of liquid carbon precursors

Kuo‑Jung Lee,Ting‑Yu Wu,Hsun‑Yu Lin,Huy‑Zu Cheng,Chih‑Feng Wang 한국탄소학회 2019 Carbon Letters Vol.29 No.4

This research combines the liquid carbon precursor infiltration process for carbon/carbon composites with the fabrication procedure for organic, carbon-matrix friction materials in automotive. In the densification process, different liquid carbon precursors and numbers of densification cycle are adopted to investigate the influence on physical and mechanical properties, microstructure and tribological behavior. Experimental results indicate that the infiltration of liquid carbon precursors could improve the physical, mechanical properties and tribological performances of organic friction materials. The open porosity decreases with the number of densification cycle. Both bulk density and hardness increase with the number of densification cycle. The resin-based specimens show higher hardness and lower open porosity than those of the pitch-based specimens after each densification cycle. The tribological measurement of specimens with different carbon precursors shows that the pitch-based specimen shows lower and more stable friction coefficients and exhibits lower weight losses in comparison with other carbon precursors. Morphological observations show that a large area of smooth lubricative film was easily presented on the worn surfaces of the pitch-based specimens, whereas it was seldom observed on the worn surfaces of the preform specimen and resin-based specimens.

Decellularized Human Umbilical Artery Exhibits Adequate Endothelialization in Xenogenic Transplantation

Kai Hsia,Tien-Shiang Wang,Chin-Su Liu,Chih-Kuan Su,Chien-Chin Chen,Chang-Ching Yeh,Hsinyu Lee,Chao-Ling Yao,Tsung-Yu Tseng,Shih-Hwa Chiou,Hsu Ma,Chih-Hsun Lin,Jen-Her Lu 한국생물공학회 2023 Biotechnology and Bioprocess Engineering Vol.28 No.3

Decellularized human umbilical arteries (dHUA) is an off-the-shelf graft that can potentially serve as vascular scaffolds in tissue engineering of small-diameter vascular grafts. This research aimed to investigate that dHUA could exhibit adequate endothelialization for a long term in xenogenic transplantation. 13 dHUAs were implanted in rat abdominal aortas up to 90 days. Rats were divided into three groups in terms of survival period: Group 1, one to seven days (n = 6); Group 2, 14 to 30 days (n = 4) and Group 3, 90 days (n = 3). The explants were analyzed by histological, immunohistochemistry and magnetic resonance angiography (MRA) examination. Allograft implantation of 12 decellularized rat abdominal aortas` were processed the same way as the rat in order to make a comparison for survival rates (Group 1, n = 5; Group 2, n = 4; Group 3, n = 3). The results demonstrated that the survival rates of xenograft and allograft implantation were estimated to be 59.2% vs. 58.3% in Group 1, 50.7% vs. 58.3% in Group 2 and 3. Grafts harvested from Group 2 were showed CD31, endothelial nitric oxide synthase expression at intima, and α-smooth muscle actin, CD45, CD68 and CD168 expression at the tunica externa. A layer structure with obvious endothelialization and fiber regeneration/orientation could be inspected from the explants of Group 3. MRA demonstrated the patency of dHUA on day 30 and 90. In conclusion, more than 50% dHUA maintained patency in the xenogenic model till 90 days after surgery. A mature vessel-like functional structure with intact endothelial layer was observed then. This warrants further study in the reinforcement of decellularized vascular scaffolds.

Improving Scanner Data Collection in P4-based SDN

Yun-Zhan Cai,Chih-Hao Lai,Yu-Ting Wang,Meng-Hsun Tsai 한국통신학회 2020 한국통신학회 APNOMS Vol.2020 No.09

Port scanning is a well-known behavior when a botnet searches target devices. To detect port scanning accurately, data with high discriminatory power are indispensable. Most related works, however, focus on data analysis methods but neglect storage limitations of switches, which makes their methods impractical. Therefore, we propose a new data collection method for collecting network information of port scanning in P4-based SDN named 0-replacement. Through simulations, we compare the 0-replacement method with two classic data collection methods. Results show that the 0-replacement method improves the true positive ratio by at least 25 percentage points but only consumes 0.36% memory space.