전기저항식 로드셀을 이용한 균등긴장시스템 개발 및 성능실험

박원태(Park Weon-Tae),천경식(Chun, Kyoung-Sik) 한국산학기술학회 2016 한국산학기술학회논문지 Vol.17 No.2

MS(Multi-Strand) 케이블은 여러 개의 강연선으로 이루어져있어, 케이블 시공시 각 강연선을 차례대로 개별적으로 긴장한다. 그리고 마지막 강연선이 정착되었을 때, 모든 강연선에 동일한 장력이 도입되어야하며, 이것이 MS 균등긴장의 핵심기술이다. 본 연구에서는 엑스트라도즈(Extradosed)교 및 사장교의 사재케이블(Stay Cable)에 적용되는 2,200MPa 초고강 도 강연선들을 균등하게 긴장, 제어할 수 있는 MS 케이블 균등긴장시스템을 개발하였다. 개발한 균등긴장시스템은 전기저항 식 로드셀, 유압잭, 유압펌프 그리고 통합제어기로 구성되며, Master 강연선과 Slave 강연선의 장력변화를 실시간으로 예측하 며 제어하는 알고리즘을 탑재하였다. 개발시스템의 기능과 성능을 검증하기 위해 균등긴장 실험을 수행한 후, 광양 태인2교 (ED교)의 사재케이블 가설긴장에 성공적으로 적용하였다. Because MS(Multi-Strand) cables consist of many strands, a jacking force is applied to each strand one by one for cable construction. All strands should have an equal tensile force when the last one is wedged. This is the core technology for MS iso-tensioning. In this study, a new MS cable iso-tensioning system was developed for controlling and jacking the high-strength strands, with an ultimate tensile strength of 2,200MPa, for a stay cable of extra-dosed/cable-stayed bridges. The newly developed iso-tensioning system consists of electrical resistance load cells, hydraulic jacking devices, hydraulic pumps, and integrated controllers. Moreover, it is embedded with an algorithm that can control and predict the variations in tensile forces of the Master and Slave strands in real time. Actual experiments were carried out to verify the function and performance of the newly developed system. This system was applied successfully to the stay cable construction of 2nd Tae-in extra-dosed bridge in Gwangyang.

갑상선기능항진증과 원발성항인지질항체증후군에 동반된 무도병 환자 1례

박종원,김동현,박태환,권오상 대한신경과학회 1998 대한신경과학회지 Vol.16 No.2

복합적층 원뿔형 쉘의 링 보강효과 연구

박원태,최재진,손병직 한국안전학회 2004 한국안전학회지 Vol.19 No.1

In this study, composite laminated conical shells with ring stiffeners are analyzed. A versatile 4-node shell element which is useful for the analysis of conical shell structures is used. An improved flat shell element is established by the combined use of the addition of non-conforming displacement modes and the substitute shear strain fields. The proposed element has six degrees of freedom per node and permits an easy connection to other types(beam element) of finite elements. And 3-D beam element is used for ring stiffeners. Optimum location and optimum section properties of ring stiffeners are obtained. It is shown that the thickness of conical shell is reduced about 201/o by optimum ring stiffeners.

λ-경쇄형 다발성 골수종 1예

박용관,김태원,장영,김진호,강정원,천영욱,박유환,정춘해 조선대학교 1995 The Medical Journal of Chosun University Vol.20 No.1

Multiple myeloma is a disease caused by neoplastic plasma cells that synthesize abnormal amouts of immunoglobulin or immunoglobulin fragments. Light chain myeloma are regarded as a separate category characterized by a more malignant clinical course. Light chain myelomas are said to grow fastest of all and are associated with more osteolytic lesions, more hypercalcemia, and a higher incidence of renal failure and amyloidsis than either the IgG, IgA varienties The authors experienced a case of patients with λ-light chain myeloma. A 43-year-old male patient admitted to our hospital with the chief complaint of both rib and lower back pain. The radiologic findings showed multiple pathologic fracture in ribs. osteolytic lesions in 2nd, 3rd cervical spineimmuture plasma cells. Serum electrophoresis showed normal finding. Urine electrophoresis evealed an M-spike. Urine immunoelectrophoress demonstrated λ-monoclonal protein. With the cycle of melphalan, prednisone and α-interferon chemotherapy improved of pain was observed. So we reported the case with brief review of previous literature.

특발성 척추측만증에서 견인 흉요추 보조기의 효과

박원욱,남태욱,안성준,유성호,문형근 대한척추외과학회 2003 대한척추외과학회지 Vol.10 No.3

지하 교대 기초 구조물의 온도균열지수 해석

박원태 국립7개대학공동논문집간행위원회 2005 공업기술연구 Vol.5 No.-

Cracking in concrete abutment footing structures is one of the main issues of concrete abutment footing structural design. Thermal stress analysis is used to prevent the thermal crack of abutment footing mat. To avoid thermal crack, methods widely acceptable for practical use are pre-cooling, pipe cooling and control of placing height. The abutment footing mat model for the analysis is 7m x 14m area and 3m height. The analysis results are compared with method of control of lift height and method of pipe cooling. The analysis results show that thermal crack can be removed by method of placing control and pipe cooling at footing mat placed on the ground.

비복근건 부분절단술을 통한 종아리성형술

박원진,이태희,신명수 大韓成形外科學會 1999 Archives of Plastic Surgery Vol.26 No.3

A muscular calf is esthetically unappealing in Asian women. Treatment by liposuction alone has poroven to be difficult due to a small amount of fat. We established a new method of transecting half of the gastrocnemius tendon in order to improve the contour of the calf. Thirty-five patients were operated on during the past 3 years. The medial or lateral half of the gastrocnemius tendon was cut using an endoscopic-guided 3M AGEE blade through a 1cm-sized incision. The portion of the muscle above the site of the transection was elevated from the underlying soleus muscles. We checked the calf circumference and evaluated the clinical results at 6 months postoperatively. An average 10% reduction in calf circumfernce was measured, showing a significant esthetic improvement. There were no significant changes in gait analysis or in the Cybex test. There were no specific complications related to the procedure. Through our clinical experience in 35 cases, we were able to prove that tenotomy is a effective, simple and easy method without severe morbidity.

보강재로 보강된 개방 원뿔형 쉘의 해석

박원태,최재진,손병직 한국안전학회 2004 한국안전학회지 Vol.19 No.4

In this study, open conical shells with ring and stringers are analyzed. A versatile 4-node shell element which is useful for the analysis of conical shell structures is used and 3-D beam element is used for stiffeners. An improved flat shell element is established by the combined use of the addition of non-conforming displacement modes and the substitute shear strain fields. The proposed element has six degrees of freedom per node and permits an easy connection to other types(beam element) of finite elements. Optimum location and optimum section properties of ring and stringer are obtained. It is shown that the thickness of conical shell can be reduced about 20~50% by appropriate location of stiffeners.

비호지킨 림프종의 임상적 고찰

김태원,조은택,조기섭,정재용,허재봉,장영,박유환,정춘해 조선대학교 1995 The Medical Journal of Chosun University Vol.20 No.1

A retrospective clinical and histologic study of 30 non-Hodgkin's lymphomas diagnosed at the Department of Hemato-oncology of the Chosun University from January 1989 to December 1993 is presented. Among total 30 cases whose sexes were mentioned, male were 18 and female were 12 and the ratio is 1.5:1. The peak incidence of non-Hodgkin's lymphoma was found in the third decade. The case distributions by Working formulation were summarized in table 3. The most common histopathologic type of non-Hodgkin's lymphoma was the diffuse large cell type of intermediate grade. The presenting symptoms at the time of first visit to the hospital were summarized in table 4. The most common symptoms were palpable mass. Lymph node enlargements were found in 87 %, and most frequently on cervical area(35%). The incidence of primary nodal lymphoma is more frequent than extranodal lymphoma, 1.2:1. The most common primary site of extranodal lymphoma is the gastrointestinal tract. In the laboratory findings, the data of hemoglobin and hematocrit were summarized in table 8, 9, Values of hemoglobin and hematocrit of female patients greater than those of male patients. The results of the immunophenotypings of nodal and extranodal lymphoma indicates that the B-cell lymphoma are predominant(B:T=1.4:1). The clinical stage was Ⅱ in 9 cases(30%) Ⅲ in 9 cases(30%), Ⅳ in 8 cases(26.7%), Ⅰin 4 cases(13.3%), 28 cases were treated with CHOP regimen. Among them, 17 cases(60.8%) achieved a complete remission. 5 cases had a partial response. The most frequent toxicities were toxic hepatitis.

IC 실현에 적합한 정현파 능동 발진기의 회로 및 특성에 관한 연구(Ⅱ)

이원건,손태호,박종연 江原大學校 産業技術硏究所 1991 産業技術硏究 Vol.11 No.-

Two kinds of simple active oscillators are proposed and analyzed assuming that operational amplifier has two-poles frequency characteristics. The first circuit is composed of one operational amplifier, one resistor and one grounded capacitor. The second oscillator is realized with one operational amplifier and three resitors. Proposed oscillators have the low sensitivity of the oscillation frequency for little variations of the passive element values. By the experimental results obtained with Op-Amp.?A741, the simple oscillators can be useful for the frequency range 1.25 KHz≤f? ≤400KHz for the active -R ocillator, and it is shown to transform the active-R oscillator circuit into the voltage controlled type.Therefore, two kinds of oscillators circuit are attractive for the IC realization, because they hve one operational amplifier, one resistor and one grounded capacitor, or three resistors.