Relationship between nonalcoholic fatty liver disease and hyperandrogenemia in adolescents with polycystic ovary syndrome

Ozlem Kara,Hanife Aysegul Arsoy,Murat Keskin 대한소아청소년과학회 2023 Clinical and Experimental Pediatrics (CEP) Vol.66 No.9

Mechanical properties of zirconia after different surface treatments and repeated firings

Ozlem Kara,A. Nilgun Ozturk,Faruk Ozel,Necla Demir,Meryem Gulce Subası 대한치과보철학회 2014 The Journal of Advanced Prosthodontics Vol.6 No.6

PURPOSE This study investigated the influence of surface conditioning procedures and repeated firings on monoclinic content and strength of zirconia before cementation. MATERIALS AND METHODS Sintered bar-shaped zirconia specimens were subjected to no surface treatment (control), air abrasion, or grinding (n=21). Their roughness was evaluated using a profilometer, and microscope analysis was performed on one specimen of each group. Then, 2 or 10 repeated firings (n=10) were executed, the monoclinic content of specimens was analyzed by X-ray diffraction, and a three-point flexural strength test was performed. Surface roughness values were compared using one-way analysis of variance (ANOVA) and Tukey honestly significant difference (HSD) tests, the monoclinic content values were tested using Kruskal-Wallis and Mann-Whitney U tests, and the flexural strength values were tested using two-way ANOVA and Tukey HSD tests (P=.05). Spearman's correlation test was performed to define relationships among measured parameters. RESULTS Surface-treated specimens were rougher than untreated specimens and had a higher monoclinic content (P<.005), and the relationship between roughness and monoclinic content was significant (P<.000). Neither surface treatment nor firing significantly affected the flexural strength, but Weibull analysis showed that for the air-abraded samples the characteristic strength was significantly lower after the 10th firing than after the 2nd firing. CONCLUSION After firing, a negligible amount of monoclinic content remained on the zirconia surfaces, and rougher surfaces had higher monoclinic contents than untreated surfaces. Multiple firings could be performed if necessary, but the fracture probability could increase after multiple firings for rougher surfaces.

Influence of subclinical hypothyroidism on metabolic parameters in obese children and adolescents

Kara, Ozlem The Korean Pediatric Society 2020 Clinical and Experimental Pediatrics (CEP) Vol.63 No.3

Background: Subclinical hypothyroidism (SH) is a common condition in obese children. However, its effect on glucose and lipid metabolism in obese children remains controversial. Purpose: The present study aimed to investigate the association between SH and metabolic parameters. Methods: A total of 215 obese children and adolescents aged 6-18 years were included in this retrospective cross-sectional study. The patients' anthropometric measurements such as thyrotropin (TSH), free thyroxine (fT4), fasting plasma glucose, and insulin levels, as well as homeostasis model assessment for insulin resistance (HOMA-IR) index, and lipid profiles were evaluated. The patients were allocated to the SH group (fT4 normal, TSH 5-10 mIU/L) (n=77) or the control group (fT4 normal, TSH<5 mIU/L) (n=138). The glucose and lipid metabolisms of the 2 groups were compared. Results: SH was identified in 77 of 215 patients (36%). Mean body mass index was similar in both groups. The mean serum insulin, HOMA-IR, and triglyceride (TG) levels were higher and the mean high-density lipoprotein cholesterol level was lower in the SH group than in the control group (P=0.007, P=0.004, P=0.01, and P=0.02, respectively). A positive correlation was observed between TSH level and insulin level, HOMA-IR, and TG level. Conclusion: SH was identified in some of the obese children and adolescents. A clear association was observed between SH, insulin resistance, and dyslipidemia in obese children.

In vitro study of fracture strength of provisional crown materials

Karaokutan, Isil,Sayin, Gulsum,Kara, Ozlem The Korean Academy of Prosthodonitics 2015 The Journal of Advanced Prosthodontics Vol.7 No.1

PURPOSE. The purpose of this report was to evaluate the effect of the fabrication method and material type on the fracture strength of provisional crowns. MATERIALS AND METHODS. A master model with one crown (maxillary left second premolar) was manufactured from Cr-Co alloy. The master model was scanned, and the data set was transferred to a CAD/CAM unit (Yenamak D50, Yenadent Ltd, Istanbul, Turkey) for the Cercon Base group. For the other groups, temporary crowns were produced by direct fabrication methods (Imident, Temdent, Structur Premium, Takilon, Systemp c&b II, and Acrytemp). The specimens were subjected to water storage at $37^{\circ}C$ for 24 hours, and then they were thermocycled (TC, $5000{\times}$, $5-55^{\circ}C$) (n=10). The maximum force at fracture (Fmax) was measured in a universal test machine at 1 mm/min. Data was analyzed by non-parametric statistics (${\alpha}$=.05). RESULTS. Fmax values varied between 711.09-1392.1 N. In the PMMA groups, Takilon showed the lowest values (711.09 N), and Cercon Base showed the highest values (959.59 N). In the composite groups, Structur Premium showed the highest values (1392.1 N), and Acrytemp showed the lowest values (910.05 N). The composite groups showed significantly higher values than the PMMA groups (P=.01). CONCLUSION. Composite-based materials showed significantly higher fracture strengths than PMMA-based materials. The CADCAM technique offers more advantages than the direct technique.

Amenorrhea as a Side Effect of Low Dose Aripiprazole: An Adolescent Case

Gulen Guler,Meryem Ozlem Kutuk,Halil Kara 대한정신약물학회 2018 CLINICAL PSYCHOPHARMACOLOGY AND NEUROSCIENCE Vol.16 No.3

Amenorrhea, oligomenorrhea, galactorrhoea, gynecomastia, infertility, and sexual dysfunction may arise as a consequence of hyperprolactinemia. Hyperprolactinemia is one of major side effects of treatment with antipsychotics, but aripiprazole is known as a dopamine stabilizer antipsychotic which can be used to improve hyperprolactinemia. In this report, it was described that an adolescent patient experienced amenorrhea after adding very low dose aripiprazole to ongoing fluoxetine treatment regime for major depressive disorder. Additionally, this case showed that the patient recovered from the amenorrhea with replacement of aripiprazole with quetiapine.

The Healing Effects of Autologous Mucosal Grafts in Experimentally Injured Rabbit Maxillary Sinuses

Murat Topdag,Ahmet Kara,Esma Konuk,Necdet Demir,Murat Ozturk,Sebla Calıskan,Deniz Ozlem Topdag,Arif Ulubil,Ibrahim Gurkan Keskin,Mete Iseri 대한이비인후과학회 2016 Clinical and Experimental Otorhinolaryngology Vol.9 No.1

Objectives. Healing processes of the nose and paranasal sinuses are quite complex, and poorly understood. In this study, we aimed to compare the effect of mucosal autologous grafts on the degenerated rabbit maxillary sinus mucosa with spontaneous wound healing. It is hypothesized that mucosal grafts will enhance ciliogenesis and improve the morphology of regenerated cilia. Methods. Ten female New Zealand rabbits were included in the study. They underwent external maxillary sinus surgery through a transcutaneous approach. A total of 20 maxillary sinuses were randomly divided into 2 groups: ‘spontaneous healing group’ and ‘autologous graft group.’ The animals were sacrificed at the 14th day after the surgery. Scanning electron microscope (SEM), and light microscope were used for the evaluation. Results. Cellular composition of the graft group is better than the spontaneous healing group. The graft group had larger areas covered with ciliary epithelium than the spontaneous healing group, and the mean length of the cilias were also longer. Additionally, there were wider cilia with abnormal morphology areas in the spontaneous healing group. Conclusion. In our opinion, covering of the denuded areas with a graft improves re-epithelization, and may prevent the early complications after sinus surgeries.

In vitro study of fracture strength of provisional crown materials

Isil Karaokutan,Gulsum Sayin,Ozlem Kara 대한치과보철학회 2015 The Journal of Advanced Prosthodontics Vol.7 No.1

PURPOSE The purpose of this report was to evaluate the effect of the fabrication method and material type on the fracture strength of provisional crowns. MATERIALS AND METHODS A master model with one crown (maxillary left second premolar) was manufactured from Cr-Co alloy. The master model was scanned, and the data set was transferred to a CAD/CAM unit (Yenamak D50, Yenadent Ltd, Istanbul, Turkey) for the Cercon Base group. For the other groups, temporary crowns were produced by direct fabrication methods (Imident, Temdent, Structur Premium, Takilon, Systemp c&b II, and Acrytemp). The specimens were subjected to water storage at 37℃ for 24 hours, and then they were thermocycled (TC, 5000×, 5-55℃) (n=10). The maximum force at fracture (Fmax) was measured in a universal test machine at 1 mm/min. Data was analyzed by non-parametric statistics (α=.05). RESULTS Fmax values varied between 711.09-1392.1 N. In the PMMA groups, Takilon showed the lowest values (711.09 N), and Cercon Base showed the highest values (959.59 N). In the composite groups, Structur Premium showed the highest values (1392.1 N), and Acrytemp showed the lowest values (910.05 N). The composite groups showed significantly higher values than the PMMA groups (P=.01). CONCLUSION Composite-based materials showed significantly higher fracture strengths than PMMA-based materials. The CAD-CAM technique offers more advantages than the direct technique.

Mechanical properties of zirconia after different surface treatments and repeated firings

Subasi, Meryem Gulce,Demir, Necla,Kara, Ozlem,Ozturk, A. Nilgun,Ozel, Faruk The Korean Academy of Prosthodonitics 2014 The Journal of Advanced Prosthodontics Vol.6 No.6

PURPOSE. This study investigated the influence of surface conditioning procedures and repeated firings on monoclinic content and strength of zirconia before cementation. MATERIALS AND METHODS. Sintered bar-shaped zirconia specimens were subjected to no surface treatment (control), air abrasion, or grinding (n=21). Their roughness was evaluated using a profilometer, and microscope analysis was performed on one specimen of each group. Then, 2 or 10 repeated firings (n=10) were executed, the monoclinic content of specimens was analyzed by X-ray diffraction, and a three-point flexural strength test was performed. Surface roughness values were compared using one-way analysis of variance (ANOVA) and Tukey honestly significant difference (HSD) tests, the monoclinic content values were tested using Kruskal-Wallis and Mann-Whitney U tests, and the flexural strength values were tested using two-way ANOVA and Tukey HSD tests (P=.05). Spearman's correlation test was performed to define relationships among measured parameters. RESULTS. Surface-treated specimens were rougher than untreated specimens and had a higher monoclinic content (P<.005), and the relationship between roughness and monoclinic content was significant (P<.000). Neither surface treatment nor firing significantly affected the flexural strength, but Weibull analysis showed that for the air-abraded samples the characteristic strength was significantly lower after the $10^{th}$ firing than after the $2^{nd}$ firing. CONCLUSION. After firing, a negligible amount of monoclinic content remained on the zirconia surfaces, and rougher surfaces had higher monoclinic contents than untreated surfaces. Multiple firings could be performed if necessary, but the fracture probability could increase after multiple firings for rougher surfaces.

Breast Cancer Awareness among Turkish Nursing Students

Celik, Sevim,Tasdemir, Nurten,Sancak, Hulya,Demirel, Merve,Akman, Ozlem,Kara, Merve Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.20

Background: This study conducted to determine breast cancer awareness and influencing factors among nursing students in the West Black Sea Region in Turkey. Materials and Methods: This cross-sectional descriptive study was conducted between April-May, 2014. The sample was 270 female nursing students. Data were collected by Personal Information Form and Champion's Health Belief Model Scale (CHBMS). Results: The students' mean age was $21.6{\pm}2.09$ and 81.1% had knowledge about breast cancer from their academic education. It is found that 63.7% of the students performed Breast Self-Examination (BSE) and 11.1% had a family member diagnosed with breast cancer. The CHBMS mean score of the students was $117.7{\pm}14.5$. Conclusions: Breast cancer awareness of nursing students is on a good level and was affected by family history of breast cancer and health beliefs.