Effect of Forging Type on the Deformation Heterogeneities in Multi‑Axial Diagonal Forged AA1100

Min‑Seong Kim,Sang‑Chul Kwon,Sun‑Tae Kim,Seong Lee,Hyo‑Tae Jeong,Shi‑Hoon Choi 대한금속·재료학회 2019 METALS AND MATERIALS International Vol.25 No.3

The present study investigated the effects that different types of forging exert on the deformation heterogeneities developedin AA1100 during multi-axial diagonal forging. To measure the deformation heterogeneities of deformed workpieces, thevalues for hardness and Kernel average misorientation were measured at the center section following each forging process. Type-D forging that consists of diagonal forging and return-diagonal forging was relatively advantageous compared withType-P forging that includes plane forging and return-plane forging for minimizing the non-uniformity of deformationdeveloped in workpieces. The effective strain developed in a workpiece during the 2 types of forging was simulated using3-D FEA. FEA revealed that the positions and degrees of occurrence for soft and hard-zones in workpieces vary greatlydepending on the forging type. Type-D forging was relatively advantageous compared with Type-P forging for minimizingthe non-uniformity of effective strain developed in workpieces.

생식용 굴(Crassostrea gigas) 작업장의 위생안전성에 대한 모니터링

강경태 ( Kyung Tae Kang ),박선영 ( Sun Young Park ),최종덕 ( Jong-duck Choi ),김민주 ( Min Joo Kim ),허민수 ( Min Soo Heu ),김진수 ( Jin-soo Kim ) 한국수산과학회 2017 한국수산과학회지 Vol.50 No.2

This study assessed the safety of raw oysters (Crassostrea gigas) for consumption during processing in a processing plant. Bacterial contamination (e.g., viable cell counts, coliform groups, and pathogenic bacteria) and chemical contamination (e.g., heavy metals and shellfish toxins) were measured on raw oysters, a processing equipment, employees, and work areas. No total mercury, lead, paralytic shellfish poison, diarrheic shellfish poison, or norovirus was detected in any post-harvested oyster samples. However, the cadmium level ranged from 0.1-0.2 mg/kg. The viable cell count and Escherichia coli and coliform group levels in post-harvested oysters ranged from 4.00-4.54 log CFU/g, ND-210 MPN/100 g, and 110-410 MPN/100 g, respectively. The viable contaminating cell counts on employees, equipment, and work areas were in the range of 0.90-3.46 log CFU/100 cm². Airborne bacteria in the work areas ranged from 0.60 to 1.81 log CFU/plate/15 min. Thus, no significant health risks were detected in the processing plant.

단신 : 실리콘의 염소화반응에 의한 사염화규소 제조

박균영 ( Kyun Young Park ),이미선 ( Mi Sun Lee ),김민철 ( Min Cheol Kim ),이찬희 ( Chan Hee Lee ),박회경 ( Hoey Kyung Park ),강태원 ( Tae Won Kang ),정해성 ( Hae Seong Jeong ),한경아 ( Kyoung Ah Han ),허원회 ( Weon Hoe Huh ),유지 한국화학공학회 2013 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.51 No.3

직경 25 mm의 파이렉스 튜브 내에서 실리콘의 유동층 염소화 반응이 수행되었다. 반응기에 공급되는 질소 유량0.8~1.0 L/min, 염소 유량 0.2 L/min, 반응온도 450℃, SiCl4 응축기의 냉매온도는 -5℃로 설정하였다. 반응기에 도입되는 가스 내 염소의 몰분율이 증가하면 SiCl4의 수율이 증가하였다. 반응가스 중 염소의 몰분율 0.2의 조건에서 SiCl4의 수율은 28% 이었다. 염소의 몰분율 증가는 반응열 상승에 의해 반응온도 상승을 가져옴으로써 안전을 고려하여 염소의 몰분율을 0.2 이상으로 올리지 못했다. 실리콘의 유동층 염소화 반응에 의한 사염화실리콘의 제조 가능성이 입증되 었으며, 향후 보다 가혹한 조건에서의 실용화 연구를 위한 기초로 활용될 수 있을 것으로 기대된다. The chlorination of a metallurgical-grade silicon was carried out in a fluidized bed reactor, 25 mm in diameter. The flow rate of the chlorine admitted into the reactor was 0.2 L/min and that of the carrier nitrogen was 0.8~1.0 L/ min. The reactor temperature was maintained at 450℃ and the temperature of the coolant at the SiCl4 condenser was at -5℃. The SiCl4 yield increased with increasing the mole fraction of chlorine in the feed gas, exhibiting 28% at the mole fraction of 0.2. Further increase of the chlorine mole fraction was not attempted in a worry that the reactor might be failed due to the high exothermicity of the reaction. The production of SiCl4 from silicon by fluidized bed chlorination was demonstrated on a laboratory scale, which is a stepping stone for future studies under more severe conditions toward industrial application.

이동형 스크러버를 이용한 암모니아 및 톨루엔의 제거 효율

김재영 ( Jae-young Kim ),김장윤 ( Jang-yoon Kim ),이연희 ( Yeon Hee Lee ),김민선 ( Min Sun Kim ),김민수 ( Min-su Kim ),김현지 ( Hyun Ji Kim ),류태인 ( Tae In Ryu ),정재형 ( Jae Hyeong Jeong ),황승율 ( Seung-ryul Hwang ),김균 ( Ky 한국환경농학회 2018 한국환경농학회지 Vol.37 No.1

본 연구는 국내에서 다량 취급되고 있는 암모니아 및 톨루엔을 흄 상태로 노출시킨 후 흡수/흡착방법을 달리한 이동형 스크러버를 이용해 각 유해화학물질의 제거효율을 비교 분석하였다. 이동형 스크러버는 기 개발된 장치를 개선하여 와류세정에 의한 흡수, 유입풍속 조절의 장점을 살리고, 활성탄 및 카본필터를 통한 기체상 유해화학물질의 흡착방법 도입을 통해 단점을 보완하였다. 개선된 장치는 기초성능평가를 통해 적정 제어풍속이 검증되었고, 5% 암모니아수 용액을 흄 상태로 노출시켜 후드 흡입부, 송풍기 배출부 및 세정기가 정상 작동함을 확인하였다. 흡수/흡착방법에 따른 암모니아 제거효율은 90분 경과 후 C≥PCA>SWA 순으로 가장 우수한 SWA 군의 노출 농도별 제거 효율은 시간이 경과할수록 노출 농도와 무관하게 배출 농도는 증가되었고, 세정액의 pH는 산성에서 염기성으로 변화되었다. 또한, 시간 경과에 따른 노출 농도 별 세정액의 pH 변화와 배출구 농도 변화 사이에 0.9429~0.9491 수준의 정의 상관관계를 나타내었다. 흡착방법에 따른 톨루엔의 제거 효율은 초기 10분 경과 후 배출구농도에서 C>CMA≥GCA 순을 나타내다 90분 경과까지 일정한 농도로 유지되었다. 가장 우수한 GCA 군의 노출 농도 별 제거 효율은 초기 10분 경과 시 노출 농도에 비례하여 배출 농도가 높은 경향이었다. 이와 같은 결과를 통해 개선된 이동형 스크러버는 중화반응에 의해 산성 또는 염기성 유해화학물질의 제거뿐 아니라, 활성탄 등의 흡착기능 개선을 통해 VOCs 제거에도 효과적이었다. 하지만, 실제 현장에서 활용이 가능하도록 세정액 pH를 지속적으로 유지하여 연속적으로 흡수 제거할 수 있는 방법과 노출되는 화학물질 농도와 흡착제의 관계에서 파괴점, 포화점, 흡착속도 등의 물리적인 요소가 추가적인 연구를 통해 도출되어야 할 것이다. BACKGROUND: The mobile vortex wet scrubber was developed to remove the harmful chemicals from accidental releases. However, there was a disadvantage that it was limitedly used for volatile organic compounds (VOCs) such as toluene according to the physicochemical properties. This study compared the removal efficiencies of an improved mobile scrubber on toluene and ammonia by applying diverse adsorption and absorption methods. METHODS AND RESULTS: The removal efficiencies on harmful chemicals were examined using various adsorption and absorption methods of water vortex process (C), phosphoric acid-impregnated activated carbon adsorption (PCA), pH-controlled water (pH 2.5) vortex process absorption with sulfuric acid (SWA) after ammonia exposure, granular activated carbon adsorption (GCA), and activated carbon mat adsorption (CMA) after toluene exposure. As a result, the best removal efficiency was shown in the SWA for ammonia and GCA for toluene. Also, the SWA and GCA methods were compared with different concentration levels. In the case of ammonia exposure (5, 10 and 25%), there was no difference by concentration levels, and the concentration in the outlet gradually increased, with pH change from acid to base. In the case of toluene exposure (50, 75 and 100%), the outlet concentration was higher relative to the exposure concentration in the initial 10 min, but the outlet concentration was remained steady after 10 min. CONCLUSION: The newly improved mobile scrubber was also effective in removing VOCs through adsorption techniques (activated carbon, activated carbon fiber, carbon mat filter etc.), as well as removing acid-base harmful chemicals by neutralization reaction.

마이크로 엔드밀에 의한 미세격벽가공의 가공특성에 관한 연구

민승기,이선우,이동주,이응숙,제태진 한국공작기계학회 2002 한국생산제조학회지 Vol.11 No.3

Recently, miniaturization and mass production are the main trends in manufacturing fields. Therefore, ultraprecision machining and MEMS technology have been taken more and more important position in machining of microparts. Micro endmilling is one of the prominent technology that has wide spectrum of application field ranging from macro parts to micro products, such as PDP ad IT components, in precision products manufacturing. However, decreasing of burr is significant problem in making smooth and precise parts in micro endmilling. This paper shows removal characteristics of burr generated by micro emdmilling process. This results satisfies micro for micro barrier ribs of heights is 50㎛, 100㎛, 200㎛, 300㎛, and observation from of burr. Additionally, it is necessary to understand the formation mechanism of burr of micro barrier ribs to find proper decreasing method.

연령에 따른 한국인의 음향지표 변화와 특성

김형태,조승호,윤성문,선동일,김민식 대한이비인후과학회 2000 대한이비인후과학회지 두경부외과학 Vol.43 No.1

Am-Be 선원을 통한 중성자의 전단면적 측정

민영기,오선영,노태익,박상태,이대원,이삼열 東亞大學校 1996 東亞論叢 Vol.33 No.-

Total cross sections was measured for 6.45MeV∼8.96MeV (average 7.7MeV) neutron on ??, ??, ?? absorber using ?? fast neutron source. The 2" ø×2" NE-213 organic liquid scitillation detector was used as a spectrometer of neutrons and gamma-rays. The zero crossing time analysis method was introduced in order to obtain the pulse heigh spectrum of neutrons and n-γ pulse-shape spectrum was investigated. The ratio of neutron peak for a Vally was 1:20. The total cross section resulting from the experiment enabled us to suppose a optical model as a neutron model, obtain the radius of a nuclei.

디지털공제방사선촬영술을 이용한 치근단 흡수의 평가

허민석,이삼선,이경희,최항문,최순철,박태원 대한구강악안면방사선학회 2001 Imaging Science in Dentistry Vol.31 No.1

Purpose : This study was performed to compare the diagnostic ability of conventional intraoral radiographs with that of digital subtraction image and to assess the quantifying ability of digital subtraction image for simulated apical root resorption Materials and Methods : Conventional intraoral radiographs and digital images of ten sound maxillary central incisors and those with simulated apical root resorption were taken with varying horizontal and vertical angulations of the x-ray beam. The diagnostic accuracy to detect the lesion was evaluated on conventional intraoral radiographs and digital subtraction images by ROC analysis. The amount of simulated apical root resorption was also estimated on the reconstruction images by Emago□ and compared with actual amount of tooth loss using paired t-test. Results : The diagnostic accuracy of conventional intraoral radiographs to detect the apical root resorption was low(ROC area = 0.6446), and the sensitivity and the specificity of digital subtraction images were 100%, respectively. The calculated amounts of apical root resorption showed no statistically significant difference with the actual amounts of the lesion (p 〉 0.05). Conclusion : Digital subtraction radiography is powerful tool to detect the small apical root resorption, and quantitative analysis of small amounts of the lesion can be evaluated by digital subtraction radiography.(Korean J Oral Maxillofac Radiol 2001;31:51-5)

암모니아 공간분포 조사를 위한 Passive Sampler 개발에 관한 연구

김학민,이범진,김선태 대전대학교 환경문제연구소 2001 환경문제연구소 논문집 Vol.5 No.-

Passive and active samplers are widely deployed for measuring gaseous pollutants such as nitrogen dioxide, sulfur dioxide and ozone in urban and rural air, however odorous compounds like ammonia, hydrogen sulfide are rarely deployed, because they are easily changed by circumstance conditions and perceived that they need a large number of measuring sites to assess mean concentration over the area. So, it is considered that the odor related phenomena could not be easily defined by cost-effective and convenient method. In this study, we developed the new sampling tool for ammonia evaluation in ambient air and the results of evaluation for evaluate the suitability of developed passive sampler for the measurement of daily averaged ammonia concentrations and spatial distribution survey are presented. Three types of absorbing solutions, filters and caps were tested at laboratory condition and the conversion factor, precision and suitability of the samplers were derived from triplicated measurement at paper mill. It is defined that for absoubing ammonia, 2% of phosphoric acid and glycerine mix(1:1) solution and chromatography filter are suitable and rubber cap is unsuitable to use during sampling and storage period. The conversion factor was derived 7.0μA at ordinary ambient air by comparison with reference method(indo-phenol method) at three different conditions. The calculated results of standard deviation among the samplers were lower than 2ppb at 86% sampling sites of total 40 sites and we could recognize the ammonia sources and variation with change of wastewater treatment plant process. Therefore the developed passive samplers are appropriate to survey ammonia spatial distrivution.

제주대학교와 창원대학교의 지체장애인 편의시설 비교분석

고상선,박철민,김태일 제주대학교 공과대학 첨단기술연구소 2002 尖端技術硏究所論文集 Vol.13 No.2

Colleges and Universities are one of our whole life educational facilities for the disabled regarding job training opportunities are academic goal achievement. However it is usual for the disabled students to be deprived of their opportunities to study and to prepare their future life on campus because of physical obstacles of campus environment. Therefore this study provides what are the physical obstacles on campus, how to use the college's facilities for the disabled to achieve their academic goals and to have job training opportunities just like ordinary students, and how to improve the campus environment which is based on the concept of Universal Design.